/P8702N_V1.00

ReadMe for P8702N V1.00(AAJX.14)

  1. Introduction

This file will show you how to build the P8702N linux system, please note, the download image will overwrite the original image existed in the flash memory of EV board.

  1. Package file

    A. 100AAJX14_4.16L.02A_consumer_release.tar.gz - P8702N open source code & Toolchains open source code

    B. ReadMe - This file

  2. Build up compiler environment.

    A. We suggest use the Linux distribution to setup your environment for reduce compatible issue.

    Install Ubuntu 12.04 Desktop 32bit

    B. Update system

    Use GUI interface to update system or use command to update system.

    $ sudo apt-get update && sudo apt-get upgrade

    C. Change default /bin/sh link to /bin/bash

    $ sudo dpkg-reconfigure dash choice "no" and pass enter.

  3. Prepare the compiler environment

    Install the following necessary tools

    $ sudo apt-get install -y g++ flex bison gawk make autoconf zlib1g-dev libcurses-ocaml-dev libncurses-dev liblzo2-dev uuid-dev patch

  4. Extract the source code and Install Toolchains NOTE: You must do following things as "root"

    $ sudo su

    tar -zxvf 100AAJX14_4.16L.02A_consumer_release.tar.gz

    ./consumer_install

     Press "y" 3 time

    The source code has been installed in folder 100AAJX14 & Toolchain has been installed in /opt/toolchains/crosstools-mips-gcc-4.6-linux-3.4-uclibc-0.9.32-binutils-2.21

  5. Build the firmware for Web-GUI upgrade using NOTE: You must do following things as "root"

    cd 100AAJX14

    make PROFILE=DSL-2492GNAU-B3BC

    The firmware image will locate at "100AAJX14/images". You can use it update P8702N by using the firmware update procedure.