TNS Observability Demo

A simple three-tier demo application, fully instrumented with Prometheus, Jaeger and Loki logging.

The "TNS" name comes from "The New Stack", where the original demo code was used for an article.

Prerequisites

There are a set of tools you will need to download and install. We recommend you place them into your /usr/local/bin directory after downloading.

Docker

This demo assumes you have Docker installed. Follow instructions here for more details.

k3d

To run this demo, you need a Kubernetes cluster. While the demo should work against any Kubernetes cluster, these docs will assume a locally running k3d cluster. Download and install k3d from here. Note that the instructions below work specifically for v1.6.0 of k3d. The later versions of k3d work very differently and it is important to use v1.6.

kubectl

kubectl is used to interact with Kubernetes clusters. Follow the instructions here to install it.

tanka

Tanka uses the Jsonnet language to interact with Kubernetes, via the kubectl tool. Download and install it from here.

jsonnet-bundler

Jsonnet bundler downloads Jsonnet dependencies. Download and install it from here.). Rename the downloaded binary to jb and move it to the location where $PATH points. Also make sure the binary is executable:

$ chmod +x /usr/local/bin/jb

Instructions

If you wish to use a Kubernetes cluster other than a local k3d one, please adjust these instructions accordingly.

Clone TNS repository

$ git clone https://github.com/grafana/tns
$ cd tns

Install K3D Cluster

$ ./create-k3d-cluster
$ export KUBECONFIG="$(k3d get-kubeconfig --name='tns')"

Install TNS applications This step will ask you to confirm yes four times.

$ ./install

Wait It will take some time to install the demo - there's a lot of downloading to do. It is not unreasonable for it to take over ten minutes for everything to download then start up.

This command will show you the status of the cluster:

$ kubectl get pods -A

All pods should be listed as either running or completed. If this is the case, your cluster should be ready for use.

Accessing the Demo

You should now be able to access the demo via http://localhost:8080/.

Reviewing the Tanka Code

This installation will have created a tanka directory in your TNS checkout. This directory contains all of the Jsonnet resources used to install this demo. You will now have a tanka directory within your checkout that contains all of the Jsonnet resources that were needed to deploy this monitoring stack. To find out more about Tanka, visit https://tanka.dev.

Disabling/enabling your cluster

Should you wish to disable your cluster, use this command:

$ k3d stop -name tns

To re-enable it, do this:

$ k3d start -name tns

Removing the Cluster

Once you have finished with the cluster, this should remove it and leave you ready to recreate it on another occasion:

$ k3d delete --name tns
$ rm -rf tanka

asquare14/tns