asterics/FLipMouse

Issues

• Sip&Puff sensor spurious failing

  #63 opened 2 years ago by benjaminaigner
  1

• 3d-printed case: improvements

  #62 opened 2 years ago by ChrisVeigl
  0

• Automatic Firmware Update

  #37 opened 2 years ago by ChrisVeigl
  3

• Add AT command to switch on/off certain buzzer beeps

  #57 opened 2 years ago by benjaminaigner
  0

• Keycode lookup if esp32_mouse_keyboard aka ESP32miniBT module is connected.

  #34 opened 2 years ago by benjaminaigner
  1

• Saving config: performance and usability

  #45 opened 2 years ago by klues
  5

• Add AT command for renaming slots

  #51 opened 3 years ago by klues
  0

• Macros: AT MA KW \;;CR; writing "ö" instead of ";"

  #50 opened 3 years ago by klues
  2

• openinput support

  #48 opened 4 years ago by perigoso
  3

• `AT SR`: add button states

  #39 opened 4 years ago by benjaminaigner
  3

• Couple of unclear instructions in Construction Guide

  #19 opened 4 years ago by Naeloo
  1

• FLipMouse GUI - Managing Bluetooth devices

  #36 opened 5 years ago by benjaminaigner
  4

• BLE: rate limiter / commands to addon module in general

  #38 opened 4 years ago by benjaminaigner
  3

• Media keys

  #35 opened 5 years ago by benjaminaigner
  0

• Infrared: record sometimes fails

  #11 opened 5 years ago by benjaminaigner
  2

• Improve batch download of slots

  #8 opened 5 years ago by benjaminaigner
  1

• Inconsistent EEPROM state

  #31 opened 5 years ago by benjaminaigner
  3

• Extra hole for external Sip/Puff

  #2 opened 5 years ago by benjaminaigner
  0

• GUI: losing slot settings if not every slot is stored

  #14 opened 5 years ago by benjaminaigner
  1

• HW - evaluate best USB plug positioning

  #18 opened 5 years ago by benjaminaigner
  0

• Wrong component labelling for BT add-on module

  #30 opened 5 years ago by ChrisVeigl
  1

• Toggle click hold

  #16 opened 7 years ago by benjaminaigner
  1

• Unclear calibration on slot-switch if gain!=50

  #21 opened 7 years ago by benjaminaigner
  4

• FlipMouse C# GUI - List of slots is not set correctly, if settings are not loaded from mouse

  #26 opened 7 years ago by benjaminaigner
  1

• FlipMouse C# GUI - Problem if ID string is assigned as keyboard write

  #24 opened 7 years ago by benjaminaigner
  1

• Flip/mirror X/Y axis

  #13 opened 7 years ago by benjaminaigner
  1

• HW - add HM10 Bluetooth module

  #17 opened 7 years ago by benjaminaigner
  1

• IR: change the output method from "NOP" ASM to a PWM timer

  #12 opened 9 years ago by benjaminaigner
  0

• Update landing page

  #10 opened 9 years ago by benjaminaigner
  1

• Implement IR (infrared) command storage

  #5 opened 9 years ago by benjaminaigner
  2

• Optimize EEPROM structure

  #4 opened 9 years ago by benjaminaigner
  1

• Flipmouse GUI: auto-increase targets wrong slider

  #3 opened 9 years ago by benjaminaigner
  0

• Firmware not compilable for TeensyLC

  #1 opened 9 years ago by benjaminaigner
  0