atc1441/ZBS_Flasher

Issues

• Error: timeout for ESP32 and ESP8266, any USB port

  #35 opened 6 months ago by chunkysteveo
  3

• What is my board version?

  #30 opened 10 months ago by Teddyz
  2

• CC2652 UART pin layout

  #38 opened 10 months ago by Smurfy37
  3

• Add license information

  #12 opened 2 years ago by vazhnov
  1

• EPS stuck with "Booting" written on

  #37 opened a year ago by PascutC
  1

• flashing with transparent mac copy

  #36 opened a year ago by coelner
  0

• ESP32-S2-Saola-1 Support

  #32 opened 2 years ago by masterX244
  6

• BG22 chip - is that the same thing?

  #34 opened a year ago by nethomas1968
  3

• zbs_flasher.py can only read?

  #33 opened 2 years ago by Smoeller0
  9

• Possible to receive uart?

  #29 opened 2 years ago by Teddyz
  0

• No image downloaded to tag if new image is available

  #21 opened 2 years ago by Teddyz
  5

• Firmware Image with Grayscale

  #25 opened 2 years ago by jhbruhn
  5

• Write MAC address

  #20 opened 2 years ago by smitterer
  1

• Flashing of ESP not working

  #19 opened 2 years ago by smitterer
  2

• Label doesn't reboot using pass through mode with an ESP32

  #18 opened 2 years ago by Albert-nl
  2

• Failed to read ZBS Flasher version

  #16 opened 2 years ago by MeisterAdebar
  31

• zbs_flasher.py throws an error

  #17 opened 2 years ago by roobbb
  4

• pins_arduino.h missing

  #15 opened 2 years ago by maxholgasson
  4

• Flashing guide

  #10 opened 2 years ago by userna-m-e
  0

• Boot-up problems

  #6 opened 2 years ago by DL5SMB
  5

• barcode.c:11: syntax error: token -> '0b00110011011' ; column 1 (linux - how to fix)

  #2 opened 2 years ago by ph2lb
  1