atlewee/node-red-contrib-knx-easy

Issues

• 14.042 DPT_Value_Luminous_Flux

  #30 opened a year ago by christianbachi
  0

• how to start project?

  #29 opened 2 years ago by tunm1228
  0

• Connections to the IP interface are not cleared

  #28 opened 4 years ago by pellenbeck
  3

• knxEasy-in parameter override

  #27 opened 4 years ago by keldi23
  0

• Crash when IP interface is disconnected

  #26 opened 4 years ago by cody82
  0

• InNode do OutNode

  #25 opened 4 years ago by Grogson
  2

• knx-easy-out node not working with Siemens SWG1 148-1AB22 IP Interface

  #18 opened 5 years ago by gh-user-1
  4

• Two-Fold Group Addresses?

  #24 opened 5 years ago by t-oster
  0

• Is it possible to have a node.status under the node?

  #17 opened 5 years ago by Supergiovane
  3

• Missing DTP

  #15 opened 6 years ago by olapola85
  3

• Cant send time to knx

  #23 opened 5 years ago by olapola85
  1

• Dismiss

  #20 opened 5 years ago by Supergiovane
  1

• Switch button

  #19 opened 5 years ago by songzh96
  0

• Sending KNX messages does not work.

  #16 opened 6 years ago by mley
  6

• Knx config does not connect and signals no result

  #13 opened 6 years ago by valeriovilla
  2

• Read Request for Output Node

  #14 opened 6 years ago by hartmutw
  3

• Detail log messages?

  #12 opened 6 years ago by bjoernbusch
  1

• Proper handling for Status-Reads

  #9 opened 6 years ago by micha149
  19

• Strange values when using multiple input nodes on the same Group Address

  #10 opened 6 years ago by t-oster
  9

• communication fail hours or days

  #4 opened 6 years ago by duncanvsmith996
  4

• Autoselect of config node?

  #3 opened 7 years ago by micha149
  2

• Provide meta data in messages

  #2 opened 7 years ago by micha149
  4

• Select-Field for DPT types

  #1 opened 7 years ago by micha149
  1