Issues
- 0
remove TQ jumper pins and hard-wire TQ to ON
#25 opened by atom-bomb - 0
remove C11 (.1uF cap on reset pin)
#24 opened by atom-bomb - 0
- 0
remove +5v pin from endstop connectors
#22 opened by atom-bomb - 3
+5V may require a regulator
#1 opened by atom-bomb - 0
Change atmega 644p to 1284p?
#21 opened by atom-bomb - 0
AMT logo is not oshpark-friendly
#17 opened by atom-bomb - 0
- 0
- 0
Change 2n2222a to pn2222
#20 opened by atom-bomb - 0
clean up silkscreen layer
#16 opened by atom-bomb - 0
provide larger supply and ground traces to motor controllers and heater mosfets
#12 opened by atom-bomb - 0
TB6600HG package is larger than TB6600HQ
#11 opened by atom-bomb - 1
- 0
Connect the fan transistor to a PWM output
#15 opened by atom-bomb - 1
POR stability
#13 opened by atom-bomb - 1
Transient voltage on SER0?
#14 opened by atom-bomb - 0
Add stackable headers for a daughter board?
#6 opened by atom-bomb - 0
AUX pins aren't broken out to a header
#2 opened by atom-bomb - 0
R56 is too close to D3 and T4
#10 opened by atom-bomb - 1
Add a fan output
#8 opened by atom-bomb - 0
- 0
Tie enable lines together?
#4 opened by atom-bomb - 0
- 0