attify/firmware-analysis-toolkit
Toolkit to emulate firmware and analyse it for security vulnerabilities
PythonMIT
Issues
- 0
Sasquatch issues
#98 opened by khaoticdude - 0
Ubi Reader no longer has a setup.py
#97 opened by khaoticdude - 1
git clone --quiet --depth 1 --branch master https://github.com/jrspruitt/ubi_reader warning: Could not find remote branch master to clone. fatal: Remote branch master not found in upstream origin
#96 opened by yqhao2002 - 3
No IP show while emulating Tp-Link Archer AX50
#95 opened by y198nt - 2
./setup.sh failed to execute
#92 opened by Jonty16117 - 12
Error while extracting RAX30 firmware
#88 opened by y198nt - 12
- 3
- 14
- 8
Image extraction failed
#50 opened by CaledoniaProject - 2
EXT2-fs error (device sda1)
#89 opened by 3826546 - 0
/etc/rc.common: eval: 1: cannot create /proc/sys/kernel/hostname: Directory nonexistent
#93 opened by jollytrivedi2019 - 0
error while boot with a new kernel file
#91 opened by y198nt - 2
[ 210.320000] firmadyne: ioctl: 0x4
#85 opened by Abib-web - 0
did not get past idenitifying architecture
#90 opened by boostinkys1000 - 3
E: Unable to locate package qt5base-dev when trying to run setup.sh on a fresh install of kali linux
#67 opened - 4
fat.py and permission error
#87 opened by torabi12 - 1
Mounting var to jffs2. [FAILED]
#86 opened by richprice36 - 4
Given No IP
#83 opened by yhsnihao - 5
Attempts to use loopback network address (127.0.0.0) instead of a valid interface?
#43 opened by djmccarthy12 - 6
WARNING: Could not open /proc/net/vlan/config. Maybe you need to load the 8021q module, or maybe you are not using PROCFS??
#84 opened by Abib-web - 2
setup.sh: Consider not patching firmadyne to change interpreter which is standard already
#81 opened by ddorando - 3
- 2
- 4
- 2
no route to host
#79 opened by azraelxuemo - 2
The browser page appears blank
#73 opened by Loora1N - 1
- 2
Can't install FAT
#78 opened by asabhish - 4
- 3
invaild start byte error.
#71 opened by dhje0ng - 8
Who can help me?
#66 opened by So4ms - 3
- 1
No route to host
#65 opened by blackndoor - 1
Python-pip is not able to be installed
#61 opened by h2th3k - 2
- 4
Trying to emulate IP cameras
#59 opened by josephKhoury95 - 2
Fail to emulate TL-WR940N
#58 opened by zr950624 - 0
Setting up the network connection error
#57 opened by godwei123 - 1
- 1
cant access IP adress through browser
#54 opened by naveen66611 - 1
Missing Jefferson dependecies after install
#55 opened by csenger18 - 7
can't emulate an "armel" firmware
#49 opened by jackulder - 1
- 1
Doesn't give an Network IP
#46 opened by kolet - 3
[question] How can I run this firmwares?
#45 opened by kismp123 - 5
Image extraction failed
#44 opened by kismp123 - 2
- 2
expecting for password
#41 opened by paramikoooo - 0
Can't found 1.tar.gz
#40 opened by zu1k