This repository contains the Eagle files containing the schematic and PCB board design for a custom designed Arduino Shield. This Arduino Shield is meant to simple be a programmer for the TQFP32 package Atmega328PAU chips. The TQFP32 to DIP adapters are easily found on ebay.
- 1x 16Mhz Crystal
- 2x strips of .1" pitch male headers
- 2x strips of .1" pitch female headers
- 2x 22pF ceramic caps
- 1x 220 ohm resistor
- 1x TQFP32 to DIP adapter
Programming the inserted TQFP32 Atmega is the same as programming any other non flashed single chip.
- Flash your Arduino Uno with the ArduinoISP sketch
- Upload your actual sketch using Sketch > Upload Using Programmer