/scylla-monitoring

Simple monitoring of Scylla with Grafana

Primary LanguageShell

Scylla monitoring with Grafana and Prometheus

Notice for users of Scylla versions prior to 1.4

If you are using a Scylla version before 1.4, or if you are using Prometheus over collectd, check out the v0.1 tag.

git checkout v0.1

The monitoring infrastructure consists of several components, wrapped in Docker containers:

  • prometheus - collects and stores metrics
  • grafana - dashboard server

prerequisites

  • git
  • docker

Install

git clone https://github.com/scylladb/scylla-grafana-monitoring.git
cd scylla-grafana-monitoring

Start docker service if needed

ubuntu $ sudo systemctl restart docker
centos $ sudo service docker start

Update prometheus/scylla_servers.yml and prometheus/node_exporter_servers.yml with the targets (server you wish to monitor). For every server, there are two targets, one under scylla job which is used for the scylla metrics. Use port 9180. For example, update targets in prometheus/scylla_servers.yml :

- targets:
  - 172.17.0.2:9180
  - 172.17.0.3:9180

Second, for general node information (disk, network, etc.) add the server under node_exporter job. Use port 9100. For example, update targets in prometheus/node_exporter_servers.yml :

- targets:
  - 172.17.0.2:9100
  - 172.17.0.3:9100

You can also use your own target files instead of updating scylla_servers.yml and node_exporter_servers.yml, using the -s for scylla target file and -n for node taget file. For example:

./start-all.sh -s my_scylla_server.yml -n my_node_exporter_servers.yml -d data_dir

In many deployments the contents of those files are very similar, with the same servers being listed differing only in the ports scylla and node_exporter listen to. To automatically generate the target files, one can use the genconfig.py script, using the -n and -s flags to control which files get created:

./genconfig.py -ns -d myconf 192.168.0.1 192.168.0.2

After that, the monitoring stack can be started pointing to the servers at 192.168.0.1 and 192.168.0.2 with::

./start-all.sh -s myconf/scylla_server.yml -n myconf/node_exporter_servers.yml

Run

./start-all.sh -d data_dir

Multiple versions support

As counters change their names between versions, we create a new dashboard for each new version. We use tags to distinguish between the different versions, to keep the dashboard menu, relatively short, by default, only the last two releases are loaded. You can load specific versions by using the -v flag.

  • You can supply multiple comma delimited versions, for example to load only 1.5 and 1.6 version:
./start-all.sh -v 1.5,1.6

  • Use the all to load all available versions.

  • The master branch is called master, so to load 1.6 and master you would use:

./start-all.sh -v 1.6,master
  • If you only need the latest version you can use:
./start-all.sh -v latest

Note: The -d data_dir is optional, but without it, Prometheus will erase all data between runs.

For systems in production it is recommended to use an external directory.

Connecting Scylla and the Monitoring locally - the local flag

When running the Prometheus and Grafana on the same host as scylla, use the local -l flag, so processes inside the containers will share the host network stack and would have access to the localhost.

Kill

./kill-all.sh

Use

Direct your browser to your-server-ip:3000 By default, Grafana authentication is disabled. To enable it and set a password for user admin use the -a option

Choose Disk and network interface

The dashboard holds a drop down menu at its upper left corner for disk and network interface. You should choose relevant disk and interface for the dashboard to show the graphs.

Update Scylla servers to send metrics

See here

Load original data to Prometheus server

Additional parameters: -d data_dir

Full commandline:

./start-all.sh -d data_dir

Comment: data_dir is the local path to original data directory

Data source for Prometheus data:

Using your own Grafana installation

Some users who already have grafana installed can just upload the Scylla dashboards into your existing grafana environment. This is possible using the load-grafana.sh script.

For example, if you have prometheus running at 192.168.0.1:9090, and grafana at localhost's port 3000, you can do:

./load-grafana.sh -p 192.168.0.1:9090 -g 3000