avr-rust/ruduino

Issues

• Is this project still supported?

  #51 opened 2 years ago by vladislav1nikov
  1

• Timer configuration for interruptless mode

  #50 opened 2 years ago by gergoerdi
  0

• ATmega32U4 support: collect register definitions from multiple modules

  #48 opened 2 years ago by gergoerdi
  1

• Where does `timer1` in the README come from?

  #40 opened 3 years ago by lord-ne
  1

• Add .devcontainer

  #47 opened 2 years ago by syddo
  0

• wish: publish at crates.io

  #46 opened 2 years ago by stappersg
  0

• "out of registers" build error

  #42 opened 3 years ago by michkrom
  3

• cores to structs (code architecture)

  #30 opened 2 years ago by djdisodo
  0

• other atmega than src/cores

  #38 opened 2 years ago by quinte17
  0

• without_interrupts(): Restore previous interrupt state rather than always re-enabling interrupts

  #10 opened 6 years ago by dylanmckay
  3

• Automatically optimise multi-pin access

  #1 opened 2 years ago by gergoerdi
  1

• #![feature(unwind-attributes)] has been removed?

  #41 opened 2 years ago by Rynibami
  1

• What is the scope / planned level of this library going forward?

  #3 opened 7 years ago by Restioson
  13

• #[feature(const_fn)] removed on latest rust nightly

  #39 opened 3 years ago by gui2maraes
  1

• Interrupt handler symbol name incorrect?

  #9 opened 6 years ago by nh2
  6

• Write trait doesn't work for serial

  #6 opened 7 years ago by clebi
  8

• no value available for environment variable 'AVR_CPU_FREQUENCY_HZ'

  #37 opened 4 years ago by conorbros
  1

• When the ruduino compile, that fail by support error for LLVM.

  #35 opened 4 years ago by himrock922
  1

• Docs.rs is complaining this won't compile

  #34 opened 4 years ago by timbell87
  3

• Compiling for ATmega4809; "no register group defined for this port"

  #33 opened 4 years ago by timwalls
  2

• Make `Register::set` use `volatile_write`

  #31 opened 4 years ago by MalteT
  2

• WaveformGenerationMode / ClockSource are private

  #23 opened 4 years ago by shepmaster
  0

• Shouldn't all IO registers use volatile operations?

  #21 opened 4 years ago by shepmaster
  0

• `Register` trait is unsound

  #28 opened 4 years ago by WaffleLapkin
  1

• Is the project dead?

  #15 opened 4 years ago by thekalinga
  2

• Differences between ports and other registers is jarring

  #22 opened 4 years ago by shepmaster
  2

• Panic handler should be optional

  #19 opened 4 years ago by shepmaster
  1

• Once it's compiled, how do you upload it on the arduino?

  #16 opened 4 years ago by jdrouet
  2

• How do I read/write analog values

  #14 opened 5 years ago by Altaflux
  3

• Relationship with Embedded-HAL

  #13 opened 5 years ago by jonahbron
  11

• Unified interrupt handler interface

  #12 opened 6 years ago by dylanmckay
  4

• Enable all cores when building documentation

  #11 opened 6 years ago by dylanmckay
  0

• Rust on an arduino Leonardo

  #8 opened 7 years ago by Kethku
  7

• contributing other boards

  #2 opened 7 years ago by dsvensson
  30

• Come up with some way to instruct LLVM that all PORT/DDR registers are zeroed at startup

  #5 opened 7 years ago by dylanmckay
  3