Hacking my heatpump for fun and...likely cold and ruins... (actually probably not cause this is going to be done super carefully but it's a fun image).
third_party contains the xtensa-esp32-elf gcc toolchain and the esp-idf download.
wget https://dl.espressif.com/dl/xtensa-esp32-elf-osx-1.22.0-80-g6c4433a-5.2.0.tar.gz
tar xzf xtensa-esp32-elf-osx-1.22.0-80-g6c4433a-5.2.0.tar.gz
git clone --recursive https://github.com/espressif/esp-idf.git
Next setup python virtualenv:
virtualenv venv
source venv/bin/activate
pip install -r
To build, from the src directory:
make -j5 all
Or to use the Makefile's little serial monitor/flash interface run
make monitor
The initial configuration will have the esp32 create a config wifi network
called hackvac_setup with setup cn105rulez.
Unittests
make -f Makefile.host host_build/include/sdkconfig.h
make -f Makefile.host host_build/include/sdkconfig.h # Twice to ensure creation.
TEST_COMPONENTS=". esp_cxx" make -f Makefile.host V=1 host_build/hackvac_host
- Wire up logging to udp port.
- Sort out
main/event_log.h - Sort out representation of device view of settings vs what is being pushed.
- Unittest HalfDuplexChannel timings.
- Deploy to device. Design real smoke and burn-in test.
- Deploy for real.