aws/aws-iot-device-sdk-arduino-yun

Issues

• Grove.ino sketch - [ERR] command: setup code: -1

  #63 opened 7 years ago by silverage01
  10

• Connect Failed! (-10) issue using BasicPubSub example

  #71 opened 6 years ago by eugenPtr
  3

• opkg install distribute error

  #74 opened 5 years ago by cmlaih
  0

• Running out of memory on yun rev 2 while trying to install sdk

  #72 opened 6 years ago by lomah001
  5

• Error on install - incompatible with the architectures configured

  #73 opened 6 years ago by ldnelso2
  2

• Setup failed! - PubSub sample

  #30 opened 8 years ago by eczajk1
  10

• Setup failed! -1 - Error code MQTT over Websocket configuration

  #70 opened 6 years ago by raftalarico
  1

• setup failed -5 with garbage message

  #69 opened 6 years ago by jemiar
  0

• SSL Connect Error

  #68 opened 6 years ago by ayyoob
  2

• CONNECT_SSL_ERROR -10

  #67 opened 7 years ago by romeogb
  1

• Disconnected from AWS if the shadow update exceeds 10 seconds

  #66 opened 7 years ago by LabGrunt
  2

• Received error code -1

  #64 opened 7 years ago by gideonmugo
  4

• Bridge.begin() - I get Setup failed! -5

  #61 opened 7 years ago by flycast
  6

• readme: easy_install pip fails for old(er) version of easy_install

  #62 opened 7 years ago by cartwrightian
  1

• Connect Failed! (-10) issue using BasicPubSub Example

  #41 opened 7 years ago by Victor9936084
  3

• Getting help and delay(10000)

  #58 opened 7 years ago by flycast
  9

• Sketch stops updating AWS IoT after some period of time

  #55 opened 7 years ago by eczajk1
  9

• BasicBubSub failing with code -1

  #60 opened 7 years ago
  1

• Last Will and Testament (LWT)

  #38 opened 7 years ago by eczajk1
  1

• When will be available the SDK for Arduino Tian?

  #48 opened 7 years ago by Mecabot
  1

• Connect Failed -13 while using pubsub example please help

  #59 opened 7 years ago by vivekscorp
  0

• PubSub - Keep getting different errors

  #57 opened 7 years ago by flycast
  2

• Setup failed -1

  #56 opened 7 years ago by flycast
  2

• PubSub Not working related to issue #39

  #47 opened 7 years ago by satay99
  16

• Can not figure out what is going on with message I am trying to publish

  #42 opened 7 years ago by OtisHarrison24
  4

• Setup failed! -1

  #50 opened 7 years ago by skrixx
  4

• Connect Failed! (-1) issue using BasicPubSub

  #54 opened 7 years ago by ciaowecia81
  6

• Beyond AWS IoT?

  #52 opened 7 years ago by LabGrunt
  2

• PubSub Example only works when Yun connected to computer

  #53 opened 7 years ago by metalshreds
  3

• Received [ERR] command: setup code: -1 with Arduino Yun example: ThermostatSimulatorDevice

  #51 opened 7 years ago by LabGrunt
  3

• Shadow update fails after 10 seconds

  #49 opened 7 years ago by hyunraider
  2

• SSL Connection Error -10

  #46 opened 7 years ago by 3141592658979
  3

• Error when trying to run basicPubSub

  #45 opened 8 years ago by ryanhliu
  12

• setup Failed with error -5

  #43 opened 8 years ago by satay99
  2

• ThermostatSimulator device

  #44 opened 8 years ago by escissorshand
  3

• Setup Failed! -5 PubSub example

  #33 opened 8 years ago by mtahamir
  7

• Getting a date value without using process date process.h

  #40 opened 8 years ago by OtisHarrison24
  1

• PubSub example not working

  #39 opened 8 years ago by dsandi
  5

• Saving readings to SD card

  #35 opened 8 years ago by OtisHarrison24
  4

• Shadow Upadate problems

  #36 opened 8 years ago by eczajk1
  3

• CONNECT_CREDENTIAL_NOT_FOUND

  #37 opened 8 years ago by matthewcarroll
  0

• ThingShadowEcho example problems

  #34 opened 8 years ago by eczajk1
  2

• Tried to add a few extra variables to the json but keep getting a error

  #31 opened 8 years ago by OtisHarrison24
  3

• Setup Failed PubSub example

  #32 opened 8 years ago by mtahamir
  1

• Connect Failed! (-1) issue using BasicPubSub Example

  #28 opened 8 years ago by mumairkhugyani
  16

• question: upload AWS-IoT-Python-Runtime/ folder to /root

  #29 opened 8 years ago by eczajk1
  1

• Setup Failed (-1) BasicPubSub

  #25 opened 8 years ago by BallastBoy
  5

• Can I use AWS IoT and use the bridge?

  #27 opened 8 years ago by GabrielFiletti
  3

• Install instructions fail: opkg_install_cmd: Cannot install package distribute.

  #26 opened 8 years ago by pbudzon
  4

• basic PubSub Error connect failed -1

  #24 opened 8 years ago by Daniel-Git-Hub
  2