Modification of MIDI CLUE BLE Glove for BIAS FX2. Lets you do crazy things like
- Use your foot as an expression pedal
- Use proximity as a momentary switch
- Switch banks and presets
Touch button 3 toggles modes.
This mode lets you select CC modes and change the default CC numbers: 71, 72, 73. X value is returned on the first (tilt left and right) value, Y value from 0° to 70° is the default (opposite of an expression pedal, easier for a foot mount), and the proximity sensor works as a momentary switch.
- Physical Button 1: Decrease Selected CC Number
- Physical Button 2: Increase Selected CC Number
- Touch Button 1: Pause CC Messages
- Touch Button 2: Move cursor
Doesn't actually move your bank up and down but sets the bank number...so you'll need some clairvoyance; Just make sure you have a real bank selected. There are 8 banks of 4 to choose from.
- Physical Button 1: Bank Down
- Physical Button 2: Bank Up
Toggles within the current bank
- Physical Button 1: Preset 1
- Physical Button 2: Preset 2
- Touch Button 1: Preset 3
- Touch Button 2: Preset 4
- Adafruit CLUE - nRF52840 Express with Bluetooth LE
- Battery Go rechargable! pick one...both work and I used both for over an hour.
- Charger (pick one)
- Cable: I assume you have a cable that goes MicroUSB into your computer...if you don't go get it.
Adafruit has this tutorial on the CLUE BLE MIDI Glove, do that first. This code was derived from that project and the API docs.