Matebook X Pro Hackintosh

This is the guide to install macOS onto the Huawei Matebook X Pro.

DISCLAIMER The project is still in its beta/testing state. Proceed at your own risk, I shall not take responsibility for any damages caused.

For quick post installation, please run this in terminal:

sh -c "$(curl -fsSL https://raw.githubusercontent.com/gnodipac886/MatebookXPro-hackintosh/master/onekey_installer.sh)"

My Matebook X Pro's Hardware Configuration:

CPU: i7-8550U @ 1.8GHz
16GB RAM
Nvidia MX 150 / Intel UHD 620
3K display @ 3000x2000
512 Gb Toshiba SSD
USB Wifi: Edimax N150 (2.4 GHz only but cheap) / Edimax AC1200 (2.4 + 5GHz)
Builtin Bluetooth: Intel Wireless Bluetooth 8275

What works:

Intel UHD 620 Graphics Acceleration
Brightness
Sleep
Realtek alc256 Audio via AppleALC
Keyboard with Volume Controls and Brightness controls (via VoodooPS2)
Camera support up to 10.14.3
Trackpad and Native Gestures via Custom VoodooI2C
Touchscreen with multi-touch capabilities (think of it as a large trackpad)
Battery Percentage
Bluetooth (Reboot from Widows required - should persist after single reboot)
Power Management - I'm getting around 8-9 hours.
Wifi via USB dongle
Liton SSDs are now supported.
HDMI 2.0 support, up to two 4K @60Hz monitors.

What doesn't Work:

dGPU (Nvidia Optimus not supported on MacOS)
eGPU (not tested)
Fingerprint Sensor
Intel Wifi (soldered onto the motherbaord)
As of right now, Samgsung PM981 SSDs are not supported.

Let's Get Started

What you need:

Huawei Matebook X Pro (either i7 or i5 model)
macOS or OS X downloaded from the Mac App Store
8GB USB stick
External USB Wifi Dongle
USB C dock (for connecting to external mouse for initial setup)

BIOS Settings

f2 is for booting into BIOS
f12 is for boot override
Any version of the BIOS is good, but I'm on version 1.26
Restore Defaults
Disable Secure boot
Matebook's BIOS is rewrite protected, EFI tool is useless against this BIOS.

Installing Without A MacOS Device

If you don't have a machine running MacOS, you can easily create your bootable USB following these steps:

Download gibMacOS Scripts
Run gibMacOS.bat
Run MakeInstall.bat
Copy clover files from this repo onto your USB

You can copy over any WiFi dongle drivers or tools you may need onto your USB for post installation

Boot from USB and select "Boot macOS install from OS X Base System"
System will reboot choose option "Boot macOS from <your_drive_name>"

Just follow through the steps and you should be good to go.

Post Installation

Please run this code in terminal:

sh -c "$(curl -fsSL https://raw.githubusercontent.com/gnodipac886/MatebookXPro-hackintosh/master/onekey_installer.sh)"

You should now be at your desktop.

Download

Clover Configurator Pro
USB Wi-fi Drivers
Newest Clover Bootloader, and install it to your boot disk

Mount EFI partition if not mounted already

Clone the repository via terminal or download it and swap the CLOVER folder downloaded for the one in your EFI directory.

Note if you have the i5 version, or any other configurations of the laptop sold exclusively in China, you should:

For i5 models: you have to make a custom CPUFriendProvider for Power Management by following this guide:

DSDT fixes

Add the VoodooI2C patches (One for the SKL+ one for Windows 10 Patch) Add the following code to your DSDT.aml to fix brightness keys.

into method label _Q0A replace_content
begin
// Brightness Down\n
    Notify(\_SB.PCI0.LPCB.PS2K, 0x0405)\n
end;
into method label _Q0B replace_content
begin
// Brightness Up\n
    Notify(\_SB.PCI0.LPCB.PS2K, 0x0406)\n
end;

Reboot

Dual Booting Fix

After Windows updates, Clover EFI might be ignored making your system boot straight to Windows. This is usually caused by a Windows update affecting EFI files. Here's how to fix it:

Grab the gibMacOS Scripts
Run MakeInstall.bat
Choose to install clover only in the script - for example, if your drive number is 1 then enter 1C for the MakeInstall.bat script and press enter
Boot from your USB that you installed Clover to and go to MacOS
Mount your boot disk EFI partition using Clover Configurator
In EFI/Microsoft or EFI/Windows rename the boot EFIs (boot.efi and bootmgfw.efi) to <original_name>-orig.efi.

That's it! Dual boot should be fixed.

Bluetooth Fix

Before any of this, make sure you have bluetooth avaliable in the menu, even if it says no hardware detected

Download: VMware, and Tinycorelinux Core.iso
Boot the iso file with VMware
Run the following command in terminal:

$ tce-load -wil bluez usbutils firmware-intel

From the Core's Bluetooth settings, uncheck "Share Bluetooth devices with Linux"
Now, you should see Intel Bluetooth in the list of devices above
Check the Intel Bluetooth box and wait for about 4-5 seconds, during this time, the check may flicker, this is ok
Then uncheck the box, and you should see bluetooth is now avaliable to macOS.

Instead of shutting down the VM, pause it and quit VMware. This saves you trouble of having to re-type the command each time, just repeat steps 4 - 7.

Updates

11/1/2019: 10.15 Catalina

Updated Kexts for Catalina support
Updated clover version for Catalina support
Adjusted brightness control method for Catalina support

7/1/2019: Pretty Small Update

Trackpad drivers updated
NoTouchID updated
You can now load bluetooth firmware in macOS without booting into windows. Source (Before any of this, make sure you have bluetooth avaliable in the menu, even if it says no hardware detected)
1. Download: VMware, and Tinycorelinux Core.iso
2. Boot the iso file with VMware
3. Run the following command in terminal:
```
 tce-load -wil bluez usbutils firmware-intel
```
1. From the Core's Bluetooth settings, uncheck "Share Bluetooth devices with Linux"
2. Now, you should see Intel Bluetooth in the list of devices above
3. Check the Intel Bluetooth box and wait for about 4-5 seconds, during this time, the check may flicker, this is ok
4. Then uncheck the box, and you should see bluetooth is now avaliable to macOS.
Still working on optimizing battery, you may try patching DSDT with the common DSDT patches mentioned here to get a better idea.

6/1/2019: Pretty big update

New Autoinstaller that just installs everything for you in jsut one click (EFI partition NEEDS to be disk0s1)
We now use SSDT hotpatch for everything (no DSDT patching needed, plug and play)
iMessage, Facetime, and Siri now work again (you do need to inject system definition: follow this tutorial)
Now supports up to two 4k@60hz monitors
New platform ID for better support (4k monitors etc. (ID: 0x591C0005))
Disable hibernation mode in script
You can now turn Bluetooth on and off (Credit carson_zsy)
New USB installation CLOVER folder for USB install
You can directly update to 14.5 now with out any plist swap
Update clover version
Updated Lilu
Updated VituralSMC
Updated Whatevergreen
Updated AppleALC

5/1/2019: Most Important Update Yet

Native brightness is now working
macOS is able to automatically adjust the brightness accroding to the ambient light sensor
Native Sleep is now working, not more glitchy screen after computer comes out from sleep, fixed by injecting custom EDID values
Native graphics: we are now using KBL graphics, we had to change the maximum link rate to HBR in order for the screen to work
Better audio: speakers are now louder, you can always just use voodooHDA but you will lose headphone detection
WhatEverGreen updated to version 1.2.8
VoodooI2C kext updated
Note* you still need to patch your DSDT for trackpad to work, and brightness keys to work.

4/11/2019: New LiteOn Patch

If you have problems updating to 10.14.4 (seeing a prohibited sign), its likely that the problem is caused by your liteon drive, please replace the following patch in your config.plist before you update.

      <dict>
        <key>Comment</key>
        <string>IONVMeFamily: Ignore FLBAS bit:4 being set - for Plextor/LiteOn/Hynix</string>
        <key>Disabled</key>
        <false/>
        <key>Name</key>
        <string>IONVMeFamily</string>
        <key>Find</key>
        <data>SBr2wRAPhQ==</data>
        <key>Replace</key>
        <data>SBr2wQAPhQ==</data>
      </dict>

4/2/2019: Config for Updating/Installing

Added New config-install/update.plist in CLOVER folder for installing purposes. You may choose this config in the boot screen of Clover: options - configs - config-install/update.plist

4/1/2019: 10.14.4 & New Power Management Kexts

New CPUFriend and CPUFriendProvider kexts for better battery life. (~9 hrs)
Run the following code if you would like to make a custom version of the power management kexts to your liking, then install the kexts located at your desktop to Clover. Source

    sh -c "$(curl -fsSL https://raw.githubusercontent.com/daliansky/XiaoMi-Pro/master/one-key-cpufriend/one-key-cpufriend.sh)"

Undervolt the CPU/GPU/Cache via a shell: Place the new "voltageshift" file into your downloads folder and run the "voltageset.command" script to undervolt, and the "voltageinfo.command" to check your results. Furthermore, you can also set custom values to what you would like to undervolt to based on your hardware (i5 vs i7) by editing the script. Source
WhatEverGreen updated to version 1.2.7
Lilu updated to version 1.3.5
New config.plist in CLOVER comes with 10.14.4 graphics patch in kexttopatch (credit gnodipac886)
New 10.14.4 graphics patch

Comment: CFL patch for MateBook X Pro (10.14.4 credit gnodipac886)
Name: AppleIntelCFLGraphicsFramebuffer
Find: <48ff0557 f607008b 96c02500 008a8e95>
Replace: <b8040000 008986bc 25000031 c05dc395>

    <dict>
        <key>Comment</key>
        <string>CFL patch for MateBook X Pro (10.14.4 credit gnodipac886)</string>
        <key>Find</key>
        <data>SP8FV/YHAIuWwCUAAIqOlQ==</data>
        <key>Name</key>
        <string>AppleIntelCFLGraphicsFramebuffer</string>
        <key>Replace</key>
        <data>uAQAAACJhrwlAAAxwF3DlQ==</data>
        <key>Disabled</key>
        <false/>
    </dict>

2/1/2019 : 10.14.3

New Virtural SMC replacing FakeSMC
Added support for 4K video output with HDMI audio support
Added tools.zip for editing system files such as config.plist or DSDT
Support for firevault2 (In theory, never tested)
Added vanilla 10.14.3 framebuffer graphics kext, if you have replaced the kext before with a custom version, please swap it out in /System/Library/Extension and then use kextutility in tools.zip to rebuild permissions then reboot with 10.14.3 config.plist.
Added "Configs" for past config.plists and plists for KBL or SKL graphics (NEED HELP)
Other tweaks to CLOVER folder to support VituralSMC kext.
Updated NoTouchID.kext to newest versions for Mojave support which elimates any lags when promted for user password
Remember to apply brightness key patches to you DSDT.aml so you can play with them for no reason
New config.plist in CLOVER comes with 10.14.3 graphics patch in kexttopatch (credit gnodipac886)
Reports of Thunderbolt eGPU was able to work when booted with eGPU plugged in, no hotplug support yet
Support for Liteon SSDs confirmed with new config.plist in CLOVER and in Configs folder

1/23/2019 : 10.14.3 Update Graphics

New 10.14.3 graphics patch

CFL patch for MateBook X Pro (10.14.3 credit gnodipac886)
Name: AppleIntelCFLGraphicsFramebuffer
Find: <48ff0589 4d07008b 96c02500 008a8e95>
Replace: <b8040000 008986bc 25000031 c05dc395>

			<dict>
				<key>Comment</key>
				<string>CFL patch for MateBook X Pro (10.14.3 credit gnodipac886)</string>
				<key>Find</key>
				<data>SP8FiU0HAIuWwCUAAIqOlQ==</data>
				<key>Name</key>
				<string>AppleIntelCFLGraphicsFramebuffer</string>
				<key>Replace</key>
				<data>uAQAAACJhrwlAAAxwF3DlQ==</data>
				<key>Disabled</key>
				<false/>
			</dict>

1/21/2019

New Whatevergreen replaced old custom version
Lilu updated
New Applealc to support native audio codec
Custom version of I2C trackpad kexts for better support
Added KBL and SKL config.plists for people who are interested to help out. Main issue: Blackscreen/ internal screen not recognized
config.plist minor fixes

Credits:

Darren_Pan on reddit
midi and Maemo on discord
Chinese Matebook X Pro Hackintosh community
Spanish Matebook X Pro Hackintosh community
All the developers who developed the kexts used in this guide.

Good Luck!

ayushyamitabh/MatebookXPro-hackintosh