azoner/pyx12

CTP Error

Closed this issue · 1 comments

arosenthal57 commented

There is a CTP error in map 837.5010.X222.A1.xml. If CTP05-01 is in the sequence 2000B-2300-2400-2410 then all of the codes are valid (F2, GR, ME, ML, UN). Element starts on line 9966. But, if the sequence is 2000C-2300-2400 then the valid codes are missing the ME code ((F2, GR, ML, UN). Element starts on line 20730

Also the same sequences have an error with CTP03. Line 9952 lists CTP03 usage as 'N' and line 20713 lists it as 'R'. Under loop path: 2000B-2300-2400-2410 and 2000C-2300-2400-2410 it only states that if CTP11 is present, then CTP03 is required.

Still being a pest. Thanks.

azoner commented

Fixed. Thanks for the eyeballs.

John Holland
john@zoner.org

On Fri, Jan 17, 2014 at 3:19 PM, arosenthal57 notifications@github.comwrote:

There is a CTP error in map 837.5010.X222.A1.xml. If CTP05-01 is in the
sequence 2000B-2300-2400-2410 then all of the codes are valid (F2, GR, ME,
ML, UN). Element starts on line 9966. But, if the sequence is
2000C-2300-2400 then the valid codes are missing the ME code ((F2, GR, ML,
UN). Element starts on line 20730

Also the same sequences have an error with CTP03. Line 9952 lists CTP03
usage as 'N' and line 20713 lists it as 'R'. Under loop path:
2000B-2300-2400-2410 and 2000C-2300-2400-2410 it only states that if CTP11
is present, then CTP03 is required.

Still being a pest. Thanks.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/29
.