This module add behaviors to input config of input subsystem for ZMK.
The module fork the input_listener.c add extra configs declared as new a compatible zmk,input-behavior-listener, as an optional replacement of official zmk,input-listener. It intercepts input events from sensor device, only enabling on specific layers, adding evt-type and behavior bindings for pre-processing via the input-behavior bindings.
Input-Behavior:
zmk,input-behavior-tog-layer: Auto Toggle Mouse Key Layer, a.k.a auto-mouse-layer. An input behaviorzmk,input-behavior-tog-layeris presented, to show a practical user case of auto-toggle 'mouse key layer'. It would be triggered viabehavior_driver_api->binding_pressed(), on input event raised and then switch off on idle aftertime-to-live-ms.zmk,input-behavior-scaler: Input Resolution Scaler, a behavior to accumulate delta value before casting to integer, that allows precise scrolling and better linear acceleration on each axis of input device. Some retangular trackpad needs separated scale factor after swaping X/Y axis.zmk,input-behavior-mixer: TBD, no schedule (yet).
Include this project on your ZMK's west manifest in config/west.yml:
manifest:
...
projects:
...
- name: zmk-input-behavior-listener
remote: badjeff
revision: main
...Now, update your shield.keymap adding the behaviors.
/* include &mkp */
#include <behaviors/mouse_keys.dtsi>
// index of keymap layers
#define DEF 0 // default layer
#define MSK 1 // mouse key layer
#define MSC 2 // mouse scoll layer
/ {
/* input config for mouse move mode on default layer (DEF & MSK) */
tb0_mmv_ibl {
/* new forked compatible name */
compatible = "zmk,input-behavior-listener";
/* the input point device alias */
device = <&pd0>;
/* only enable in default layer (DEF) & mouse key layer (MSK) */
layers = <DEF MSK>;
/* event code value to override raw input event */
/* designed for switching to mouse scroll, xy-swap, precise-mode+, etc */
/* NOTE: only apply input-code overriding for INPUT_EV_REL */
evt-type = <INPUT_EV_REL>;
x-input-code = <INPUT_REL_X>;
y-input-code = <INPUT_REL_Y>;
scale-multiplier = <1>;
scale-divisor = <1>;
/* bind a behavior to auto activate MSK layer for &mkp */
bindings = <&ib_tog_layer MSK>;
/* align to CCW 45 degree */
rotate-deg = <315>;
/* NOTE 1: This settings do not compitable with y-invert and x-invert */
/* NOTE 2: Floating point computation requires alot of ram. */
/* This feature will cuase stackover flow with CONFIG_ZMK_USB_LOGGING=y */
};
/* input config for mouse scroll mode on momentary mouse scoll layer (MSC) */
tb0_msl_ibl {
compatible = "zmk,input-behavior-listener";
device = <&pd0>;
layers = <MSC>;
evt-type = <INPUT_EV_REL>;
/* slienting x-axis with alt event code */
x-input-code = <INPUT_REL_MISC>;
y-input-code = <INPUT_REL_WHEEL>;
/* invent scrolling direction */
y-invert;
/* align to CCW 45 degree */
rotate-deg = <315>;
/* NOTE 1: This settings do not compitable with y-invert and x-invert */
/* NOTE 2: Floating point computation requires alot of ram. */
/* This feature will cuase stackove flow with CONFIG_ZMK_USB_LOGGING=y */
/* bind a behavior to down scaling input value to (1/8) */
/* NOTE: This behavior memorizes recent pending displacement, it is different to scale-divisor. */
/* The delta value is accumlated until result >= 1 after cast. */
/* The scrolling will be smoother and allow precise scrolling */
bindings = <&ib_wheel_scaler 1 8>;
};
/* adjust cooldown waiting period for mouse key layer (MSK) after activated */
ib_tog_layer: ib_tog_layer {
compatible = "zmk,input-behavior-tog-layer";
#binding-cells = <1>;
time-to-live-ms = <1000>;
};
/* define a resolution down scaler only for INPUT_REL_WHEEL */
ib_wheel_scaler: ib_wheel_scaler {
compatible = "zmk,input-behavior-scaler";
#binding-cells = <2>;
evt-type = <INPUT_EV_REL>;
input-code = <INPUT_REL_WHEEL>;
};
keymap {
compatible = "zmk,keymap";
DEF_layer {
bindings = < &mo MSK .... ... >;
};
MSK_layer {
bindings = < ..... &mkp LCLK &mo MSC >;
};
MSC_layer {
bindings = < ..... &mkp LCLK ... >;
};
};
};
If you got compile error of undefined reference to 'zmk_hid_mouse_XXXXXX_set', you are probably need to build with a ZMK branch with PR 2027 merged. Without PR 2027, the mouse movement is not presented via HID Report and your cursor won't reflect the readings.
Or, you might try to develop an alttnative HID Usage Page with an experminatal module (zmk-hid-io).