Note: This project is part of a larger smart home effort working with Home Assistant. I feel like there should be a better way to document all the subproject in one place, so that might still come.
- About this project
- ESP8266 toolchain SDK installation
- CLion Instructions
- WiFi and MQTT configuration with SDKCONFIG
For clarity, toolchain refers to the xtensa-lx106-elf-XXX binaries used to compile your ESP8266 projects with, and
SDK refers to the libraries/header files and examples from Espressif to make your life as a programmer easier. Also the
tool to flash and monitor your device is part of the SDK.
Get the latest toolchain from the Github repository of Espressif After you've gotten the latest toolchain, follow the remaining instructions on the repository to also install the latest SDK. More information about the installation can be found on their getting started page.
Open File > Settings > Build, Execution, Deployment > CMake. Select the profile you want to work on (or create if there's none yet). For CMake options fill in:
-DCMAKE_C_COMPILER="/home/user/esp/xtensa-lx106-elf/bin/xtensa-lx106-elf-gcc" -DCMAKE_CXX_COMPILER="/home/user/esp/xtensa-lx106-elf/bin/xtensa-lx106-elf-g++"
Note: replace with your own absolute paths of where you put the toolchain.
For Build options put -- -j N where N is the number of processor cores in your system + 1. So for a quad core
processor N will be 5.
For Environment I had to put ESPPORT=/dev/ttyUSB0 to force the SDK to use the correct USB port. This might
not be necessary in your case. Of course replace with the USB port your device is connected to. The USB port can be
found on Linux by in a terminal running ls /dev/ttyUSB?. If there's multiple results, disconnect your device to find
the difference in result, that being your ESP8266.
Open a terminal in your project directory and run make menuconfig. A custom entry has been added thanks to the Kconfig.projbuild file in the main folder. Here enter the SSID and password of your WiFi. For the MQTT broker URL adhere to the following format mqtt://[username]:[password]@[broker_url]:[port]. Here replace with your own username, password, broker url and its MQTT port.