balena-io-hardware/autokit-interface-sw

Issues

• Standardize a way of dealing with multiple devices of the same class

  #45 opened 2 years ago by phckopper
  3

• provide list of connected modules

  #29 opened 2 years ago by rcooke-warwick
  2

• re-organise how flashing instructions are stored

  #7 opened 2 years ago by rcooke-warwick
  2

• Provide mechanism to carry out "healthcheck"

  #46 opened 2 years ago by rcooke-warwick
  1

• Device flashing should be consistent with a single source of truth

  #47 opened 2 years ago by Bucknalla
  0

• The signature in the FTDI module `write` method doesn't comply with our interface

  #26 opened 2 years ago by phckopper
  2

• Separate core logic from web server

  #40 opened 2 years ago by phckopper
  2

• Devices using the Linux Automation SD Mux aren't flashed correctly when the DUT is powered on during the process

  #38 opened 2 years ago by phckopper
  0

• balena fin flashing code assumes uhubctl compatible hub is in place

  #6 opened 2 years ago by rcooke-warwick
  3

• add support for detecting if DUT is on/off

  #5 opened 2 years ago by rcooke-warwick
  1

• Add support for template matching on captured video

  #2 opened 2 years ago by phckopper
  4

• Add configuration interface

  #33 opened 2 years ago by phckopper
  0

• Allow for specifying "none"/"null" for hardware attached

  #24 opened 2 years ago by rcooke-warwick
  1

• Use variables in the Dockerfile in order to support multiple architectures

  #27 opened 2 years ago by phckopper
  0

• add deploy with balena action for hub app

  #18 opened 2 years ago by rcooke-warwick
  1

• Transform constants into environment variables

  #9 opened 2 years ago by phckopper
  0