balena-io-hardware/fin-coprocessorFirmata-sw

Issues

• Flashing co-processor trough Balena Fin link needs to be updated

  #36 opened 3 years ago by acostach
  1

• Buffer overflow

  #35 opened 3 years ago by rickhewes
  1

• Firmware wont work out-of-the-box on balena 1.1.1

  #33 opened 3 years ago by ric-osorio
  1

• JF Test Issue 2

  #34 opened 3 years ago by joshbwlng
  0

• Coprocessor based watchdog timer

  #18 opened 5 years ago by rohfle
  7

• Serial data garbled when draining and filling simultaneously

  #31 opened 4 years ago by martenjacobs
  1

• Capsense Issue in BGM111

  #30 opened 4 years ago by Ronnie4324
  1

• Seperate PWM and DAC commands

  #4 opened 4 years ago by Bucknalla
  1

• BGM111 implements an IDAC not a DAC

  #1 opened 4 years ago by Bucknalla
  2

• Check compatability with `CAPABILITY_QUERY`

  #25 opened 4 years ago by Bucknalla
  0

• Output to shared volume from Dockerfile

  #24 opened 4 years ago by Bucknalla
  1

• Firmata balena Sleep should put coprocessor into lowest power mode (EM3)

  #16 opened 5 years ago by Bucknalla
  1

• Add I2C support

  #6 opened 4 years ago by Bucknalla
  2

• Merge with balena-fin-firmata-flash

  #14 opened 5 years ago by martenjacobs
  2

• millis() off by factor of 8

  #15 opened 5 years ago by martenjacobs
  1

• Possible to implement a power button?

  #13 opened 5 years ago by martenjacobs
  2

• Clean up unnecessary files

  #5 opened 6 years ago by Bucknalla
  0

• No support for INPUT_PULLUP direction in Firmata v2.5

  #7 opened 6 years ago by Bucknalla
  0

• Decode PORT -> digitalWrite() function

  #3 opened 6 years ago by Bucknalla
  0

• Swap to using EM_LIB USART driver for implementing RX ISR

  #2 opened 6 years ago by Bucknalla
  0