Pinned Repositories
BIGTREETECH-SKR-V1.3
32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
Bootstrap
A full featured bootstrap for ios14.0~17.0 (A8~A17,M1+M2)
BTT-TFT70-SuperRacer
Firmware écran BigTreeTech TFT70 3.0 configuré pour FLSUN Super Racer
Dell-XPS-9370-Hackintosh-Opencore
HACKINTOSH DELL XPS 9370 OPENCORE i7-8650U
FLSUN-SR-Klipper-Klipper-Screen-Neopixel-Theme
This repository contains configuration for Klipper-Klipper screen and neopixel for FLSUN Super Racer with the necessary scripts and macros using robin nano V3 Motherboard.
Flsun-super-racer-Full-klipper-config-
complete Kllipper based on klipper docs and flsun marlin. routinely updated with the same functionality and higher spec
FLSUN-v400-Bondtech-LGX-Lite-Cura-Profile
Cura Profile for the FLSUN v400 using a LGX Lite extruder
klipper
Klipper is a 3d-printer firmware
KlipperScreen-Flsun-V400
KlipperScreen for FLSUN V400
OrcaSlicer
G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, Flsun, etc.)
bankm1's Repositories
bankm1/Dell-XPS-9370-Hackintosh-Opencore
HACKINTOSH DELL XPS 9370 OPENCORE i7-8650U
bankm1/FLSUN-v400-Bondtech-LGX-Lite-Cura-Profile
Cura Profile for the FLSUN v400 using a LGX Lite extruder
bankm1/Bootstrap
A full featured bootstrap for ios14.0~17.0 (A8~A17,M1+M2)
bankm1/FLSUN-SR-Klipper-Klipper-Screen-Neopixel-Theme
This repository contains configuration for Klipper-Klipper screen and neopixel for FLSUN Super Racer with the necessary scripts and macros using robin nano V3 Motherboard.
bankm1/Flsun-super-racer-Full-klipper-config-
complete Kllipper based on klipper docs and flsun marlin. routinely updated with the same functionality and higher spec
bankm1/klipper
Klipper is a 3d-printer firmware
bankm1/KlipperScreen-Flsun-V400
KlipperScreen for FLSUN V400
bankm1/Marlin-SuperRacer-MKS-Nano-V3
Marlin Firmware configured for FLSUN Super Racer with MKS Robin Nano V3 motherboard.
bankm1/OrcaSlicer
G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, Flsun, etc.)
bankm1/BIGTREETECH-SKR-V1.3
32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
bankm1/BTT-TFT70-SuperRacer
Firmware écran BigTreeTech TFT70 3.0 configuré pour FLSUN Super Racer
bankm1/Ender3V2S1
This is optimized firmware for Ender3 V2/S1 3D printers.
bankm1/Klipper-Flsun-Super-Racer
Klipper for FLSUN Super Racer
bankm1/Klipper-for-MKS-Boards
bankm1/Flsun-S1-T1
Repository for FLSUN S1 & T1
bankm1/klipgitbackup
bankm1/Marlin-SuperRacer-SKR2.0-LGX-Lite
Firmware Marlin configuré pour FLSUN Super Racer avec SKR 2 et Bondtech LGX Lite.