0.25.0.0 (2024-08-10)
- Added 'THE' to Material Schedule Note.
- Added command
CLASSIFIEDAREAOL
for drawing Classified Area one line symbols. - Added command
CLASSIFIEDAREASP
for drawing Classified Area size plan symbols.
- Changed content of Wetwell/Vault one line and site plan symbols.
- Added note in Demolition Legend one line symbol.
- Changed note ([CITY], [COUNTY], [OWNER]) in 'GENERAL|FOR MATERIAL SCHEDULE|REQUIRED' category.
- Fixed 'SCOPE' note in 'GENERAL|FOR MATERIAL SCHEDULE|REQUIRED' category.
- Added part of about aluminum steps to generator notes.
- Added 'FROM/TO' additions for I/O's to the Remote Telemetry Unit notes.
- Added RTU brand 'High Tide Technoligies' to Remote Telemetry Unit and Lift Station Pump Control Panel one line symbols.
- Added RTU type 'Cellular (By Zile Technology)' to Remote Telemetry Unit and Lift Station Pump Control Panel one line symbols.
- Changed Aluminum Security Lighting Pole detail.
- Fixed long time insertion of detail.
- Fixed graphics of the 'Bonding Lugs and Plates' detail.
- Fixed duplications notes for site plan commands.
- Fixed properties visible for Remote Telemetry Unit and Lift Station Pump Control Panel one line symbols.
0.24.0.0 (2024-07-26)
- Added command
STORAGETANKINTERIORLIGHTS
for drawing Storage Tank Interior Lights site plan symbols. - Added command
STORAGETANKLOGOLIGHTS
for drawing Storage Tank Logo Lights site plan symbols. - Added command
GNDPIGTAILSP
for drawing Grounding Pigtail (for Future Grounding Connection) site plan symbols. - Added command
STUBUP
for drawing Stub-Up symbol. - Added command
LIGHTSYMBOLS
for drawing Light symbols. - Added command
LINESSP
for drawing various line types.
- Added Grounding Pigtail (for Future Grounding) Connection symbol for Grounding Multi Tools.
- Removed float for activate alarm horn and strobe from Bypass one line Note.
- Fixed tag for Panelboard Full one line symbol.
- Changed motor tags Motor one line symbol.
- Removed material from the Submersible Pressure Transducer installation detail.
- Changed "NEMA 4X SS" to "NEMA 4X STAINLESS STEEL" for Stationary Generator one line symbol.
- Changed receptacle name 'Heat Trace (By-Pass Connection)' for Receptacle one line and site plan symbols.
- Removed 'FOR (WITH SUN SHIELD)' in 'INDICATING LIGHTS' for one line Pump Control Panel note.
- Fixed Emergency Push Button drawing for Stationary Generator one line symbol.
- Fixed syntax errors.
- Fixed missing back bracket in 'IF REQUIRED'.
0.23.1.0 (2024-07-02)
- Fixed orientation of the receptacles one line symbol.
0.23.0.0 (2024-07-01)
- Added command
RECEPTACLEOL
for drawing Receptacle one line symbol. - Added command
RECEPTACLESP
for drawing Receptacle site plan symbol. - Added command
POWEREQUIPSYMBOLS
for drawing Power Equipment Symbols. - Added command
BYPASSPUMPOL
for drawing Bypass Pump one line symbol. - Added command
BYPASSPUMPSP
for drawing Bypass Pump site plan symbol. - Added command
OBSTRUCTIONLIGHTCONTROLLEROL
for drawing Obstruction Light Controller one line symbol. - Added command
OBSTRUCTIONLIGHTCONTROLLERSP
for drawing Obstruction Light Controller site plan symbol. - Added save/restore parameter name column width in palette of insertion parameters.
- Added Existing Utility Service Upgrade note to the Notes tool.
- Changed the note of one line grounding.
- Changed Security Light installation detail ('FROM POWER SOURCE').
- Added 'RADIO TOWER' to radio antenna leader of RTU one line symbol.
- Changed color of part of notes, about separate conduit for signals cables.
- Removed 'Company Name' parameter for Utility Transformer one line symbol.
- Added 'Service Upgrade' for existing Utility Transformer one line symbol.
- Removed 'One Line Diagram' detail label for Utility Transformer one line symbol.
- Added parameter 'PIT/SS' for Level Pressure Transducer one line and site plan symbol.
- Fixed syntax error in Surge Suppressor note.
- Fixed NEMA rating (NEMA 4X) for Surge Suppressors.
- Fixed format of prompt text for installation details.
- Fixed color of Level Float Switch (and Backup).
- Fixed parameters for Manhole and Handhole one line symbols.
- Fixied ('WILL' to 'TO') Generator legend.
- Fixed conduit size for Conduit Text command.
0.22.0.0 (2024-06-14)
- Added command
GNDSYMBOLS
for drawing Grounding Symbols. - Added command
REVISION
for drawing Revision clouds and revision titles. - Added command
MOTORSP
for drawing Motor and sensors site plan symbols. - Added command
DISCONNECTSWITCHSP
for drawing Disconnect Switch site plan symbol. - Added command
DISCONNECTSWITCHFUSESP
for drawing Fused Disconnect Switch site plan symbol. - Added command
DISCONNECTSWITCHFUSESERSP
for drawing Fused Disconnect Switch SER site plan symbol. - Added command
HANDSTATIONOL
for drawing Hand Station (Emergency Stop Push Button) one line symbol. - Added command
HANDSTATIONSP
for drawing Hand Station (Emergency Stop Push Button) site plan symbol. - Added command
MOTORSYMBOLS
for drawing Motor and Instrument site plan symbols.
- Added '(VFD SHIELDED)' to conductor label for VFD (MCC) and Enclosed Motor Starter (VFD type).
- Changed Automatic Transfer Switch (SER) one line symbol.
- Added second connection grounding to fence.
- Added grounding notes.
- Changed 'GND Size' and added 'Exisitng' parameters to Motor Frame Grounding.
- Renamed 'Existing Grounding' to "Grounding Multi Tool" and added 'Existing' parameter.
- Changed 'EXISTING' in notes for 'Motor Frame Grounding' and 'To Ground Grid'.
- Changed line type for Vendor's cables/conduits.
- Added 'MB Amperage' parameter to Grounding Triangle site plan symbol.
- Added 'AWG' to note of Grounding one line symbol.
- Changed minimal grounding conductor size to #1.
- Changed radius site plan symbols: Motor - 0.15" and Instrument - 0.1".
- Changed Discharge Pressure Transducer installation detail.
- Changed ('WITH GASKET' added and others) Meterial Schedule Tables.
- Added option parameters (Junction Box and Disconnect Switch connection) for Submersible Pump site plan symbol.
- Added option parameters (Junction Box connection) for Level Float Switches site plan symbol.
- Added option parameters (Junction Box connection) for Level Pressure Transducer site plan symbol.
- Added option parameters (Junction Box connection) for Back Up Level Float Switches site plan symbol.
- Added option parameters (Junction Box connection) for Level Sensor Probe site plan symbol.
- Added presets of conduits notes to Duct Bank Text command.
- Changed notes of Pump Control Panel (LS).
- Fixed grounding 10 ft copper ground rod size.
- Fixed leader position of test ground well.
- Fixed abort command after note step for Grounding Triangle site plan symbol.
- Fixed "FOR POWER AND CONTROLS (PB-P-SCRN) AND SIGNALS (PB-S-SCRN)" in the Pull Boxes note in the "ELECTRICAL SITE PLANS -> POWER PLANS" category.
- Changed "FUSIBLE" to "FUSED" for Disconnect Switches.
0.21.0.0 (2024-05-24)
- Added command
GNDEXISTINGSP
for drawing of Existing Grounding site plan symbol. - Added command
GNDMOTORFRAMESP
for drawing of Motor Frame Grounding site plan symbol. - Added command
LIGHTINGCONTACTOROL
for drawing of Lighting Contactor one line symbol. - Added command
LIGHTINGCONTACTORSP
for drawing of Lighting Contactor site plan symbol. - Added command
DISCHARGEPRESSURETRANSMITTEROL
for drawing of Discharge Pressure Transmitter one line symbol. - Added command
DISCHARGEPRESSURETRANSMITTERSP
for drawing of Discharge Pressure Transmitter site plan symbol. - Added command
SPDOL
for drawing of Surge Protection Device one line symbol.
- Added 'Equipment Rack' paramerter in the Power Meter site plan symbol.
- Added 'Passive Filter' list item to 'Line Reactor/Filter' parameter of the MCC VFD device one line symbol.
- Added 'VFD Torque Type' parameter of the MCC VFD device one line symbol.
- Added VFD Torque Legend step of the MCC VFD device one line symbol.
- Renamed the 'MATERIAL' ribbon tab to 'MISCELLANEOUS'.
- Added new symbol and parameters for VFD to
MOTORSTARTEROL
command. - Added 'Concrete Pad' parameter to Equipment Rack site plan symbol.
- Added 'Switchboard' and 'MCC' panels to the 'SITE PLAN' tab of ribbon.
- Added 'RVSS Bypass Contactor' parameter (for RVSS motor starter type) for Enclosed Motor Starter one line symbol.
- Added 'Quantity' parameter for Conductors Schedule Table.
- Added range to titles of number parameters.
0.20.0.0 (2024-05-16)
- Implemented the placement mechanism (palette of parameters).
- Added command
SWITCHBOARD_CB
for drawing of Circuit breaker device of Switchboard one line symbol. - Added command
SWITCHBOARD_SPACE
for drawing of Space circuit breaker device of Switchboard one line symbol. - Added command
SWITCHBOARDSP
for drawing of Switchboard site plan symbol. - Added command
MCC_SPACE
for drawing of Space devices of Motor Control Center one line symbol. - Added command
MCCSP
for drawing of Motor Control Center site plan symbol. - Added command
GNDBUILDINGSP
for drawing of Building Grounding site plan symbol.
- Changed dimention label ("4' MIN" on "4 FT MIN") for Equipment Rack site plan symbol.
- Formatted detail 'Bonding Lugs and Plates'.
- Added button to ribbon for Poratable Generator (Trailer Mounted) one line symbol.
- Removed quantity of ground rods in grounding notes.
- Changed item of Pump Control Panel note to '120V, 5A RATED DRY CONTACTS AND SIGNALS PREWIRED TO FIELD TERMINALS'.
- Changed command name
MOTORCONTROLCENTEROL
toMCCOL
of Motor Control Center one line symbol. - Changed command name
GNDSP
toGNDTRIANGLESP
of Grounding site plan symbol. - Added symbols 'GROUND BUS BAR' and 'BUILDING CONNECTION' to the
GROUNDING_SYMBOLS_*
block. - Added details steps to Triangle Grounding site plan symbol.
- Fixed SPD button name.
- Fixed error witch doesn't show a folder of the plotted file after plotting.
0.19.0.0 (2024-04-24)
- Added the Gray Color tool.
- Added video tutorials: 'Как добавить Site Plan на чертеж' and 'Лечение Add ON Удаление не нужных вкладок'.
- Enhanced the ribbon initialization and handling workspace changing.
- Set color of '30mA' in MPZ and Panelboard Schedules.
- Added auto disable
FRAME
for Ductbank Line command. - Show limit values for the Cable Schedule Table and incresed max value to 75 rows.
- Added 'AND INSTALL' to note of SPD.
- Changed cable labels for the Motor and the Motor (LS) one line symbols.
- Added RTU into Pump Control Panel one line symbol.
- Added reference cable labels for RTU and RTU in PCP one line symbols.
- Fixed note translation errors.
- Remove unused layer from Detail Label block.
- Fixed syntax error in Natural Gas Stationary Generator note.
- Fixed syntax error in Bottom CB for MCC and Switchboard.
- Fixed text position in Control Panel one line component.
- Fixed layer for wetwell/vault site plan and one line diagram elements.
- Fixed 'XX' in cable label for RTU.
- Fixed graphic connection SPD to CB SER and DS Fused SER for one line symbols.
- Fixed note of the Junction Box one line symbol.
- Fixed notes of Security Light for site plan symbols.
- Fixed note of Ductbank Line site plan symbol.
- Fixed note of Flow Indication Transmitter one line symbol.
- Fixed loads text for Switchboard and MCC one line symbols.
- Fixed error on open tutorials window.
0.18.1.0 (2024-04-04)
- Added command
SEALOFFOL
for drawing Seal-Off one line symbol. - Added font size changing in Notes window.
- Added translation of notes to the Notes window.
- New declaration of plugin tabs in the ribbon.
- Changed description for test ground well to 'PROVIDE ONE (1) TEST GROUND WELL' and disable
FRAME
. - Through numeration of circuit breakers in multi-section mini-panelboard schedule table.
- Changed cable/conduit label format to double 'XX' for not confirmed values.
- The color of the tags in the description of the submersible motor (LS) was set to red.
- Changed cable/conduit label for submersible motor to '2 RUNS OF CABLE BY VENDOR IN XX" C. EACH (TYP. FOR XX)'.
- Added checkbox for optional drawing grounding ring for stationary generator for site plan.
- Added dimentions in Wetwell/Vault one line command.
- Added 'SEE PANELBOARD SCHEDULE ON THIS SHEET' to Full Panelboard one line symbol.
- Notification per available update by changing 'Check update' button icon.
- Changed color for 'FUTURE CONNECTED LOAD' and 'FUTURE RUNNING LOAD' for Full Panelboard one line symbol.
- Fixed errors for
SSSERVERPUBLISH
command. - Fixed wrong RTU antenna (radio and cellular).
- Fixed wrong 'MAGNETIC WARNING TAPE' text position in Duct Bank grade.
- Fixed syntax error 'SLEEVE' in Generator Receptacle (one line) note.
- The color of reference cable type label changed.
- Fixed text position in Motor Starter one line component.
0.18.0.0 (2024-03-04)
- Added command
RTUOL
for drawing Remote Telemetry Unit one line symbol. - Added command
RTUSP
for drawing Remote Telemetry Unit site plan symbol. - Added command
MATERIALSET
for drawing Material Schedule set. - Added internal RTU option for Pump Control Panel (Lift Station) one line symbol.
- Changed Junction Box one line note.
- Renamed note category name 'GENERAL|TREATMENT PLANT|REQUIRED' to 'GENERAL|FOR MATERIAL SCHEDULE|..'.
- Renamed note category name '..|REQUIRE' to '..|REQUIRED'.
- Added note item 'ONE (1) 480V, 20A, 3P CIRCUIT BREAKER FOR ELECTRIC CRANE' to Pump Control Panel one line symbol.
- Added 'TRANSFORMER CONCRETE PAD' leader to Utility Transformer site plan symbol.
- Fixed scale format for 'SIZE PLAN' to '1/16" - 1'-0"'.
- Fixed note numbers for Motion Sensor and Time Delay Switch for Security Light site plan symbol.
- Fixed duplicate notes for Motion Sensor and Time Delay Switch for Security Light site plan symbol.
- Fixed synt. errors in Security Light Wooden Pole Detail.
- Fixed site plan Utility Transformer leader to 'PAD MOUNTED UTILITY TRANSFORMER (NOTE X1)'.
0.17.0.0 (2024-02-12)
- Added command
WETWELLVAULTOL
for drawing one line hazardous areas. - Added command
WETWELLVAULTSP
for drawing one line leaders and labels. - Added command
SUBMERSIBLEPUMPSP
for drawing Submersible Pump site plan symbol. - Added command
PRESSURETRANSDUCERSP
for drawing Submersible Pressure Transducer site plan symbol. - Added command
BACKUPFLOATSWITCHSP
for drawing Back-Up Level Float Switch site plan symbol. - Added command
EQUIPRACK
for drawing Equipment Rack site plan symbol. - Added command
FLOWMETEROL
for drawing Magnetic Flow Meter one line symbol. - Added command
FLOWMETERSP
for drawing Magnetic Flow Meter site plan symbol. - Added command
LEVELSENSORPROBEOL
for drawing Level Sensor Probe one line symbol. - Added command
LEVELSENSORPROBESP
for drawing Level Sensor Probe site plan symbol. - Added command
SECURITYLIGHTOL
for drawing Security Light one line symbol. - Added command
SECURITYLIGHTSP
for drawing Security Light site plan symbol. - Added command
FLOATSWITCHOL
for drawing Level Float Switches one line symbol. - Added command
FLOATSWITCHSP
for drawing Level Float Switches site plan symbol. - Added detail steps to site plan generator command: Bonding Lugs and Plates, Ground Test Well and Generator Grounding.
- Added note and details steps to site plan Duck bank line command.
- Added 4 pole item to all one line disconnect switches.
- Made lower case of list values for option window.
- Added 'SURGE PROTECTION DEVICE' item to one line Pump Control Panel note.
- Added 'Internal Space Heater' option in one line MCC and Switchboard.
- Changed test ground well leader text to 'PROVIDE ONE (1) TEST GROUND WELL'.
- Added units to 'Output Power' of generators.
- Added 'BACKUP' to Back-Up Level Float Switch one line symbol.
- Changed DB line thickness to 0.1 inch for Site Plan symbol.
- Made 'VFD' and 'VFD Advanced' options to one line Motor Starter.
- Added 'ONE LINE DIAGRAM' label as 4th step to Utility Transformer one line symbol.
- Updated 'Submersible Cable Anchors' installation detail.
- Fixed syntax errors in one line Pump Control Panel note.
- Added '(' and ')' to motor (DUTY/STAND-BY) one line symbol.
- Cable label for existing Back-Up Level Float Switch one line symbol.
- Fixed "3CT's" for Switchboard and Motor Control Center one line symbols.
0.16.0.0 (2024-01-16)
- Added "smart" MCC rectangle.
- Added
PRESSURETRANSDUCEROL
to Pressure Transducer one line symbol. - Added
BACKUPFLOATSWITCHOL
to Back-Up Float Switch one line symbol. - Added
GENERATORRESEPTACLESP
to Portable Generator Receptacle site plan symbol. - Added
GENERATORCAMLOCKBOXSP
to Generator Cam Lock Connection Box site plan symbol. - Added 'Minimum Size Equipment Grounding' tutorial image.
- Changed 'SS' to 'STAINLESS STEEL' in PCP note.
- Changed VFD item in PCP note.
- Changed VFD symbol (in/out phase) for PCP one line symbol.
- Changed DB legend line thickness to 0.1 inch.
- Handhole installation detail title.
- Lift Station pump Seal-Off note.
- Lift Station Pump Control Panel site plan symbol.
- Fixed wire of 'E' (Emergency) terminal in Manual Transfer Switch one line.
- Fixed refer panelboard schedule text position in Panelboard Mini one line.
- Fixed Detail Lable block references.
0.15.0.0 (2023-12-28)
- Added
MCC_CB
to MCC circuit breaker one line symbol. - Added
MCC_FVNR
to MCC FVNR-starter one line symbol. - Added
MCC_FVR
to MCC FVR-starter one line symbol. - Added
MCC_RVSS
to MCC RVSS one line symbol. - Added
MCC_VFD
to MCC VFD one line symbol.
- Added 'DUTY/STAND-BY' to Submersible Pump one line symbol.
- Added parameters to Submersible Pump one line symbol and details.
- Changed NEMA 'SS' to 'STAINLESS STEEL' for CB/MB/MTS/ATS/NON-ATS.
- Changed one line generator note.
- Removed amps of main circuit breaker in generator note.
- Changed one line note for Pump Contro Panel (Lift Station).
- Changed conductors label for transfer switches.
- Removed 'Is ..' in option label.
- Fixed note of Pump Control Panel for Lift Station.
- Fixed low case for main device title in panelboard one line symbols.
0.14.2.0 (2023-12-20)
- Added description 'DENOTES EQUIPMENT WILL BE BACKED UP BY GENERATOR' to generator legend.
- Aligned generator legend by left bottom corner (base point).
- Fixed huge text for some components.
0.14.1.0 (2023-12-15)
- Swapped generator legend items.
0.14.0.0 (2023-12-12)
- Added command
GNDSP
for drawing Triangle Grounding one line symbol. - Added command
SWITCHBOARDOL
for drawing Switchboard one line symbol. - Added command
MOTORCONTROLCENTEROL
for drawing Motor Control Center one line symbol. - Added command
PUMPCONTROLPANELOL
for drawing Pump Control Panel one line symbol. - Added command
PUMPCONTROLPANELSP
for drawing Pump Control Panel site plan symbol. - Added command
SUBMERSIBLEPUMPOL
for drawing Submersible Pump one line symbol. - Added command
GENERATORRESEPTACLEOL
for drawing Portable Generator Receptacle one line symbol. - Added command
GENERATORCAMLOCKBOXOL
for drawing Generator Cam Lock Receptacle one line symbol.
- Changed Duct Bank linetypes to: direct, conctete and reinforced concrete.
- Added new DB linetypes to command
DBLINE
. - Added 36 notes to the note generator.
- Added 'V' letter after voltages for Dry-Transformer one line symbol.
- Fixed default value of NEMA rating to '3X SS' for Mini-Panelboard one line symbol.
- Added refer to note to leader for Manhole site plan symbol.
0.13.0.0 (2023-10-25)
- Added command
PULLBOXOL
for drawing Pull Box one line symbol. - Added command
PULLBOXSP
for drawing Pull Box site plan symbol.
- Added 'FLC' reference property for Motor one line symbol.
- Changed publish files name (.PDF) to 'XXXXX_NN', where XXXXX - a project number and NN - ordered number.
- Replaced local color to layer color for existing schedules tables.
- Added reference cable label for Motor one line symbol.
- Removed 'MANUAL' drop-down menu item of 'Horsepower' property for Motor one line symbol, if the phase quantity is not defined.
0.12.0.0 (2023-10-24)
- Added command
MOTORSTARTEROL
for drawing Enclosed Motor Starter one line symbol. - Added command
CONTROLPANELOL
for drawing Control Panel one line symbol. - Added command
DISCONNECTSWITCHOL
for drawing Disconnec Switch one line symbol. - Added command
DISCONNECTSWITCHFUSEOL
for drawing Disconnec Switch Fuse one line symbol. - Added command
MOTOROL
for drawing Motor one line symbol.
- Added 360 notes to the note generator.
- Added CB notes for generators.
- Added spaces for generators one line symbols.
- Added demolition legend command to one line ribbon tab.
- Replace NEMA rating value "3R SS" to "4X SS" for panelboards.
0.11.0.0 (2023-10-12)
- Added command
DEMOLITIONLEGEND
for drawing Demolition Legend symbol. - Added command
PANELBOARDOL
for drawing Panelboard one line symbol.
- The number of rod wells set to red color for generator note.
- Moved origin point for Duct Bank legend.
- Added disappearance the 'Main Breaker Size' property for the 'Main Device' property equal 'MLO' for Mini-Panelboard component.
- Fixed color entities for the
DBLEGEND
command. - Changed the pole number (1PH -> 2P and 3PH -> 3P) for the Panelboard SER and Mini-Power Zone one line symbol.
- Fixed AIC value for the Panelboard, Panelboard SER and Mini-Power Zone one line symbol.
- Swaped schedule table values 'Voltage (L-N)' and 'Voltage (L-L)' of properties for Mini-Power Zone one line symbol.
- Fixed layout of the Detail block reference.
0.10.0.0 (2023-09-21)
- Added command
GNDOL
for drawing Ground Ring/Triangle one line symbol.
- The Generator command for the site plan has been completed.
- Added Underground Duct Banks title to the
DBGRADE
command. - Fixed wrong layer for site plan symbols.
- Fixed site plan descriptions of symbols.
0.9.0.0 (2023-09-15)
- Added new tutorial video: Принципы и основы подшивки проекта - Теория.
- Added warning message to the Power Meter one line symbol: 'For In Line ≤ 300A and for With CT's > 300A'.
- Added warning message to the Mini-Panelboard SER one line symbol: 'MB ≤ 600A, Branch CB ≤ 225A'.
- Added command
POWERMETERSP
for drawing Power meter site plan symbol. - Added command
DRYTFRSP
for drawing Dry-Transformer site plan symbol. - Added command
MINIPOWERZONESP
for drawing Mini-Power Zone site plan symbol. - Added command
PANELBOARDSP
for drawing Panelboard site plan symbol. - Added command
CIRCUITBREAKERSERSP
for drawing Circuit Breaker SER site plan symbol. - Added command
CIRCUITBREAKERSP
for drawing Circuit Breaker site plan symbol. - Added command
MTSSP
for drawing MTS site plan symbol. - Added command
ATSSP
for drawing ATS site plan symbol. - Added command
ATSSERSP
for drawing ATS SER site plan symbol. - Added command
NONATSSP
for drawing Non-ATS site plan symbol. - Added command
NONATSSERSP
for drawing Non-ATS SER site plan symbol. - Added command
JUNCTIONBOXSP
for drawing Junction Box site plan symbol. - Added command
WEATHERHEAD
for drawing Weatherhead site plan symbol. - Added command
MANHOLESP
for drawing Manhole site plan symbol. - Added command
HANDHOLESP
for drawing Handhole site plan symbol. - Added command
HANDHOLEDT
for drawing Handhole Detail site plan symbol. - Added command
WIREWAYSP
for drawing Wire Way site plan symbol. - Added command
SPDSP
for drawing SPD site plan symbol. - Added command
DBLINE
for drawing Duck Bank line for site plan. - Added command
DBGRADE
for drawing Duck Bank Grade symbol. - Added command
DBCONDUIT
for drawing Duck Bank Conduit symbols. - Added command
DBTEXT
for drawing Duck Bank Template text. - Added command
DBLEGEND
for drawing Duck Bank Legend symbol. - Added command
GENERATORSTATIONARYSP
for drawing Stationary Generator site plan symbol (BETA). - Added 16 reference pictures.
- Changed Circuit Breaker (One Line) command:
CIRCUITBREAKERSEOL
toCIRCUITBREAKERSEROL
. - Chagned Mini-Panelboard (One Line) command:
MINIPANELBOARDSEOL
toMINIPANELBOARDSEROL
. - Chagned ATS (One Line) command: ATSNONSEROL to
ATSOL
. - Chagned Non-ATS (One Line) command:
NONATSNONSEROL
toNONATSOL
. - Chagned MTS (One Line) command:
MTSNONSEROL
toMTSOL
. - Added orthogonal mode for Area mode of Demolition tool.
- Added Polyline mode of Demolition tool.
- Changed NEMA rating lists.
- Changed notes list marker to "Xn".
- Removed the GND conductor for input of the Main Breaker one line symbol.
- Changed the pole number (1PH -> 2P and 3PH -> 3P) for the Panelboard one line symbol.
- Fixed wrong drawing previews of tutorial videos and pictures.
- Fixed title of option windows.
- Chagned the signal name to 'ATS IN EMERGENCY POSITION' in generators note.
- Fixed tutorial window layout items.
0.8.0.0 (2023-08-15)
- Added new tutorial video: Что такое измерительные инструменты и для чего они нужны? #1.
- Added site plan symbol for Utility transformer.
- Fixed back moving of view when a command canceled.
- Changed notes list marker to number.
- Changed default cable label to 'X #X & 1 #X GND IN X" C.'.
- Added AIC value to the Mini-Power zone one line symbol.
- Chagned row vertical align to left middle for schedule table.
- Changed other line type for Main Breaker SER and Mini-Panelboard SER one line symbols.
- Added detail label for Mini-Power zone component.
- Chagned SER specification on 'SERVICE ENTRANCE RATED' for Main breaker (SER) and Mini-Panelboard (SER).
- Removed double 'SERVICE ENTRANCE RATED' specification for Mini-Panelboard (SER).
- Changed color for a note reference for utility transformer.
- Fixed the syntax error in the note row in the Mini-Power zone schedule.
- Added dot for Mini-Panelboard like 'CKT.'.
- Fixed memory leak for MText in MLeader.
- Fixed aborting the active placement command.
- Fixed cell align for panelboard schedule.
0.7.0.0 (2023-07-11)
- Added command
MINIPOWERZONEOL
for drawing one line mini-power zone symbol. - Added command
MINIPANELBOARDOL
for drawing one line mini panelboard symbol. - Added command
MINIPANELBOARDSEOL
for drawing one line service entrance rated mini panelboard symbol.
- Changed generators notes.
- Changed text height to 0.1" for generators legend.
- Removed '(BY GEN. VENDOR)' for existing walk-in generator symbol.
- Appended signal descriptions for existing stationary generator symbol.
- Appended signal descriptions for existing transfer switch symbols.
- Fixed memory leak for unmanaged objects.
- Fixed SPD model prefix to 'CAT#: '.
- Fixed formatting power lines description.
- Removed '(NOTE X)' for existing utility transformer.
- Fixed SPD cable label on 'EXISTING CABLES/CONDUIT' in ATS-SER and MB-SER components.
0.6.1.0 (2023-06-06)
- Fixed error drawing secondary graphics.
0.6.0.0 (2023-06-05)
- Added command
NOTESGEN
for configure and drawing notes.
0.5.0.0 (2023-05-26)
- Added command
GENERATORWALKINOL
for drawing one line walk-in generator symbol.
- Added note for stationary generator commponent.
- Added "Exernal SPD" option for service entrance rated transfer switches.
- Increased the output power list (up to 2000kW) in stationary generator command
GENERATORSTATIONARYOL
. - Changed cable label template (removed GND) for utility transformer.
0.4.0.0 (2023-05-20)
- Added command
MTSNONSEROL
for drawing one line manual transfer switch symbol. - Added command
ATSNONSEROL
for drawing one line automatic transfer switch symbol. - Added command
ATSSEROL
for drawing one line service entrance rated automatic transfer switch symbol. - Added command
NONATSNONSEROL
for drawing one line non-automatic transfer switch symbol. - Added command
NONATSSEROL
for drawing one line service entrance rated non-automatic transfer switch symbol. - Added
Reset
button for set to default values for properties in options window. - Added command
UTILITYSPLICINGOL
for drawing one line utility splicing symbol. - Added command
JUNCTIONBOXOL
for drawing one line junction box symbol. - Added command
CONDULETOL
for drawing one line condulet symbol. - Added command
WIREWAYOL
for drawing one line wireway symbol. - Added command
MANHOLEOL
for drawing one line manhole symbol. - Added command
HANDHOLEOL
for drawing one line handhole symbol. - Added command
GENERATORSTATIONARYOL
for drawing one line stationary generator symbol (exclude notes).
- The insertion point for some components changed to convenience.
- Added CB ARC note for generic circuit breaker and main breaker component.
- Fixed place SPD note for Automatic transfer switch (SER).
0.3.0.0 (2023-05-05)
- Automatic check available update on startup AutoCAD.
- Added command
CIRCUITBREAKERSEOL
for drawing one line service entrance rated circuit breaker symbol. - Added command
CIRCUITBREAKEROL
for drawing one line generic enclosed circuit breaker symbol.
- Updated dialog and details dialog.
- Updated Dry-Transformer detail.
- Removed not implemented
WIRESCHEDULEROW
command. - Fixed working
DEMOLITION
command on plugin created rectangles. - Fixed company name to upper case in
UTILITYTFROL
command.
0.2.0.0 (2023-04-29)
- Fixed error in creating line type in
WIRELABELFULL
command.
0.1.0.0 (2023-04-29)
- Added command
EUPDATE
for check and download update. - Added command
WIRELABELFULL
for drawing full cable label. - Added command
WIRELABELREF
for drawing reference cable label. - Added command
WIRESCHEDULE
for drawing cable schedule table. - Added command
UTILITYTFROL
for drawing one line utility transformer symbol. - Added command
DRYTFROL
for drawing one line dry-transformer symbol. - Added command
DRYTFRDT
for drawing detail of dry-transformer. - Added command
POWERMETEROL
for drawing one line power meter symbol. - Added command
DEMOLITION
for drawing demolition area. - Added command
NUMERATOR
for numerationText
andMText
objects. - Added command
SSSERVERPUBLISH
for publishing sheet set in the internal company server. - Added command
TUTORIALCLUB
for opening window with links to tutorials.