TempLogger is a C++ program meant to be run on Arduino WeMos D1 R1, but can also be any esp8266 compatible boards. This program does send every x seconds temperature and humidity to a google spreadsheet. Temperature and humidity is obtained with a simple DHT22 sensor.
Make sure the DHT22 is plugged like in diagrams Power up the board and it will starts to send the data online.
If the data does not updates, you will need to start the Arduino IDE on your computer and check the Serial logs through USB.
In order to modify the program you will need to follow all those following steps. If you have any issue during this procedure, please open an issue here
-
-
Download all of this project's files by using the CODE button or clicking here
-
Unzip the downloaded content on your computer
-
With the Arduino IDE, open the main.ino file
-
Plug the Arduino UNO on the computer using a USB cable, on the editor check the right port where the Arduino is connected to
-
Modify the program
-
Using the Verify button on the editor in order to check if you made error or not
-
Click the Upload button to compile & send the program to the board
-
The program should now be modified 😁
