basarane/kemper-arduino-library

Issues

• Schemes and configuration

  #24 opened a year ago by fredmelo1373
  1

• arduino example does not refresh rig name

  #23 opened 5 years ago by fotosettore
  8

• When config for stomp parameter mode finished, change exp. pedal mode to param

  #22 opened 9 years ago by basarane
  0

• Delay/Reverb mix parameter display

  #21 opened 9 years ago by basarane
  0

• Verify all stomp parameters

  #6 opened 9 years ago by basarane
  0

• Calculate text width correctly in TFT display

  #12 opened 9 years ago by basarane
  0

• Add reverb and delay to stomp parameter modify functionality

  #4 opened 9 years ago by basarane
  0

• Update leds when looper is active

  #11 opened 9 years ago by basarane
  1

• Limit parameter buffer to 5 rigs to save ram space

  #20 opened 9 years ago by basarane
  1

• Cancel stomp parameter mode when another rig switch is pushed

  #17 opened 9 years ago by basarane
  0

• Add stomp parameter mode to expression pedal modes

  #16 opened 9 years ago by basarane
  0

• Display if kemper is connected or not

  #18 opened 9 years ago by basarane
  0

• Use smartphone as an expression pedal

  #19 opened 9 years ago by basarane
  0

• Show "which expression pedal controls what?" on display

  #14 opened 9 years ago by basarane
  0

• Save stomp parameters to EEPROM

  #9 opened 9 years ago by basarane
  0

• Emulate EEPROM in Windows version

  #10 opened 9 years ago by basarane
  0

• Limit number of stomps assigned to a switch to 3

  #8 opened 9 years ago by basarane
  1

• Mark stomps with parameters assigned to expression pedal

  #13 opened 9 years ago by basarane
  0

• Send led info to serial interface only if there is a change

  #15 opened 9 years ago by basarane
  0

• Parameter mode for a rig should override the old values

  #7 opened 9 years ago by basarane
  1

• Update currentParameters on rig change

  #3 opened 9 years ago by basarane
  0

• Clear bottom screen on parameter mode exit

  #5 opened 9 years ago by basarane
  0

• Make blinking leds in sync with tap tempo

  #2 opened 9 years ago by basarane
  0

• Cannot receive performance and selected slot info from kemper

  #1 opened 9 years ago by basarane
  1