E-robot: Platform files for Arduino to run on ATmega1284P

What is it?

Everything you need to run Arduino on ATmega1284P. (this is based off https://github.com/maniacbug/mighty-1284p)

Current state

Everything is here and has been initially tested. It should work fine. There is more detailed testing which must be completed before calling it completely 'done' though.

The platform now includes optiboot. This bootloader is better in every way than the previous version, so it is recommended in all cases. The prior one is included for reference.

Installation

Download the ZIP File
Unzip it a folder called 'hardware' off your sketches directory, e.g. /Users/maniacbug/Source/Arduino/hardware/mighty-1284p
Restart the IDE
Select Tools > Board > Mighty 1284p 16MHz using Optiboot
To burn the bootloader, follow the Arduino Bootloader instructions.

Requirements

Works only on Arduino >= 1.0
Cannot be burned using USBtinyISP. That programmer cannot flash to chips with >64k flash size.

Supported Boards

E-robot 1284p 16MHz using Optiboot