Pinned issues
Issues
- 1
- 0
- 0
QNA-UC5G1T DSM 7.2.1-69057 Update 5 网络失联问题
#133 opened by qilinbar - 0
Sabrent NT-SS5G last driver aqc111-apollolake-1.3.3.0-12 fully functional on DS418play upgraded to DSM7.2.1-69057 update 5
#132 opened by YVES59 - 0
VLAN Tags with OVS Interface not applied correctly - including temporary fix
#99 opened by fred-bloggs - 38
- 2
Disconnected with DS1817
#100 opened by powerpc970 - 4
- 3
DS3622xs+ (dsm 7.1.1 upd4) --> aqc111 loop error -
#105 opened by LeniReinfe - 4
When using virtual machine manager/open vSwitch, QNAP adator doesn't work as gateway
#85 opened by jameslashmar - 1
- 2
- 2
DSM 7.2 DS920+ Manual installation fails
#114 opened by towel42-com - 2
DS918+ 7.1.1 can't install the driver
#94 opened by hxy770128 - 1
Woudl like to try with DS413
#106 opened by LauraMSchreiber - 2
Sabrent NT-SS5G last driver aqc111-apollolake-1.3.3.0-10 outdated on DS418play upgraded to DSM7.2
#111 opened by YVES59 - 18
DS920+ DSM 7.1.1-42962 U1 -aqc111 (SABRENT NT-SS5G)-geminilake-1.3.3.0-9.spk -> Fix: Edit the Network Interface to reset the IP #84
#86 opened by KipiKland - 5
DS218+ with Sabrent NT-SS5G - install, shutdown the NAS and the interface dissapears
#88 opened by dvelayos - 5
DS418j AQC111 driver does not start
#98 opened by powerpc970 - 2
ds920+ failed, prompting the repair kit continuously
#101 opened by muyigege - 9
- 2
two usb network cards at the same time?
#103 opened by bg2vcj - 5
- 9
- 3
Active/Passive Bond does not work
#123 opened by marcel151 - 1
QNA-UC5G1T becoming unreliable after updating to DSM 7.2.1-69057 Update 5 (from Update 4)
#129 opened by marcel151 - 1
Request driver for DS214Play
#131 opened by yiu0916 - 1
DS718+ '/opt': File exists`
#130 opened by UnhealthyKraken - 3
QNAP TS-233
#125 opened by pihokkerr - 1
Cannot install package on 918+
#126 opened by donomatic - 4
- 4
AQC111 driver with QNAP QNA-UC5G1T USB 3.0 to 5Gbe Adapter always stops working after some time
#124 opened by salsafunatiker - 2
Linux 5.15.x (LTS kernel) support
#118 opened by mattrpav - 2
aqc111-geminilake-1.3.3.0-11_7.2.spk 权限问题望修复
#120 opened by liuyongchao - 4
Linux 6.2 support
#116 opened by mattrpav - 1
- 0
- 2
Only Gigabit Speeds with DSM 7.2-64570 and DSM620 Slim (Driver v1.3.3.0-12)
#117 opened by ModeSevenIndustrialSolutions - 5
DS920+ Using AQC111 r 1.3.3.0-11 for DSM 7.2 beta with QNAP-UC5G1T - repeated crashes under load
#109 opened by HCATmike - 1
RS3618xs - Driver Not Auto Starting Post Reboot
#113 opened by Inch-high - 7
Can't change between high and low power mode
#102 opened by johnjonjohn - 9
Repackage for DSM7.2 working for r8152
#104 opened by noblemd00 - 2
- 3
DS918+ apollolake 2.6.13-3 & Plugable USBC-E2500, missing from UI and eth2 not populated
#95 opened by sgreadly - 5
- 1
DS218Play - Driver crash after installation
#97 opened by War3333 - 1
smb file copy via 5gbe QNAP adapter
#91 opened by warlordattack - 5
DS220+ SPK can't work
#87 opened by bg2vcj - 1
DS220+ working fine
#90 opened by ofbarea - 3
Can't install 1.3.3.0-10 DSM-7.x on DS918+
#89 opened by sparkplug37