ZGrab 2.0

ZGrab is a fast, modular application-layer network scanner designed for completing large Internet-wide surveys. ZGrab is built to work with ZMap (ZMap identifies L4 responsive hosts, ZGrab performs in-depth, follow-up L7 handshakes). Unlike many other network scanners, ZGrab outputs detailed transcripts of network handshakes (e.g., all messages exchanged in a TLS handshake) for offline analysis.

ZGrab 2.0 contains a new, modular ZGrab framework, which fully supersedes https://github.com/zmap/zgrab.

Installation

With Docker

You can run ZGrab 2.0 with our official Docker image. For example, to scan a single website using the HTTP module, you can use:

echo 'example.com' | docker run --rm -i ghcr.io/zmap/zgrab2 http

For more complex scanning scenarios, such as using multiple modules or custom configurations, you can create a configuration file and pass it to the container:

docker run --rm -i -v /path/to/your/config.ini:/config.ini ghcr.io/zmap/zgrab2 multiple -c /config.ini

Replace /path/to/your/config.ini with the path to your configuration file on the host machine. See Multiple Module Usage for more details on configurations.

Building from Source

For Go 1.17 and later you must build from source:

git clone https://github.com/zmap/zgrab2.git
cd zgrab2
make
./zgrab2

For Go 1.16 and below you can install via go get:

You will need to have a valid $GOPATH set up, for more information about $GOPATH, see https://golang.org/doc/code.html.

Once you have a working $GOPATH, run:

go get github.com/zmap/zgrab2

This will install zgrab under $GOPATH/src/github.com/zmap/zgrab2

cd $GOPATH/src/github.com/zmap/zgrab2
make

Single Module Usage

ZGrab2 supports modules. For example, to run the ssh module use

./zgrab2 ssh

To retrieve detailed command-line usage and options for a specific module, append -h to the command:

./zgrab2 [module] -h

This will display the module-specific options, as well as the application-wide options, including usage examples, available flags, and descriptions for each option.

Module specific options must be included after the module. Application specific options can be specified at any time.

Input Format

Targets are specified with input files or from stdin, in CSV format. Each input line has three fields:

IP, DOMAIN, TAG

Each line must specify IP, DOMAIN, or both. If only DOMAIN is provided, scanners perform a DNS hostname lookup to determine the IP address. If both IP and DOMAIN are provided, scanners connect to IP but use DOMAIN in protocol-specific contexts, such as the HTTP HOST header and TLS SNI extension.

If the IP field contains a CIDR block, the framework will expand it to one target for each IP address in the block.

The TAG field is optional and used with the --trigger scanner argument.

Unused fields can be blank, and trailing unused fields can be omitted entirely. For backwards compatibility, the parser allows lines with only one field to contain DOMAIN.

These are examples of valid input lines:

10.0.0.1
domain.com
10.0.0.1, domain.com
10.0.0.1, domain.com, tag
10.0.0.1, , tag
, domain.com, tag
192.168.0.0/24, , tag

Multiple Module Usage

To run a scan with multiple modules, a .ini file must be used with the multiple module. Below is an example .ini file with the corresponding zgrab2 command.

multiple.ini

[Application Options]
output-file="output.txt"
input-file="input.txt"
[http]
name="http80"
port=80
endpoint="/"
[http]
name="http8080"
port=8080
endpoint="/"
[ssh]
port=22

./zgrab2 multiple -c multiple.ini

Application Options must be the initial section name. Other section names should correspond exactly to the relevant zgrab2 module name. The default name for each module is the command name. If the same module is to be used multiple times then name must be specified and unique.

Multiple module support is particularly powerful when combined with input tags and the --trigger scanner argument. For example, this input contains targets with two different tags:

141.212.113.199, , tagA
216.239.38.21, censys.io, tagB

Invoking zgrab2 with the following multiple configuration will perform an SSH grab on the first target above and an HTTP grab on the second target:

[ssh]
trigger="tagA"
name="ssh22"
port=22

[http]
trigger="tagB"
name="http80"
port=80

Adding New Protocols

Add module to modules/ that satisfies the following interfaces: Scanner, ScanModule, ScanFlags.

The flags struct must embed zgrab2.BaseFlags. In the modules init() function the following must be included.

func init() {
    var newModule NewModule
    _, err := zgrab2.AddCommand("module", "short description", "long description of module", portNumber, &newModule)
    if err != nil {
        log.Fatal(err)
    }
}

Output schema

To add a schema for the new module, add a module under schemas, and update zgrab2_schemas/zgrab2/__init__.py to ensure that it is loaded.

See zgrab2_schemas/README.md for details.

Integration tests

To add integration tests for the new module, run integration_tests/new.sh [your_new_protocol_name]. This will add stub shell scripts in integration_tests/your_new_protocol_name; update these as needed. See integration_tests/mysql/* for an example. The only hard requirement is that the test.sh script drops its output in $ZGRAB_OUTPUT/[your-module]/*.json, so that it can be validated against the schema.

How to Run Integration Tests

To run integration tests, you must have Docker and Python 2 on host installed. Then, you can follow the following steps to run integration tests:

go get github.com/jmespath/jp && go build github.com/jmespath/jp
# or, sudo wget https://github.com/jmespath/jp/releases/download/0.2.1/jp-linux-amd64 -O /usr/local/bin/jp && sudo chmod +x /usr/local/bin/jp
pip2 install --user zschema
pip2 install --user -r requirements.txt
make integration-test

Running the integration tests will generate quite a bit of debug output. To ensure that tests completed successfully, you can check for a successful exit code after the tests complete:

echo $?
0

Refer to our Github Actions workflow for an example of how to prepare environment for integration tests.

License

ZGrab2.0 is licensed under Apache 2.0 and ISC. For more information, see the LICENSE file.

bbhunter/zgrab2