bboyho/Capacitive_Touch_Dance_Floor_with_Teensy

Capacitive Touch Dance Floor with Teensy

Prototype Capacitive Touch Dance Floor with Teensy and a pair of XBee Series 1s configured for I/O line passing.

Repository Contents

• /Documentation - Fritzing circuit
• /Firmware - Example code

Documentation

• Enginursday: Prototype Capacitive Touch Dance Floor with a Teensy and XBees

If you aren’t familiar with the following concepts, it is recommended to check out these tutorials.

• Teensy 3.2: Pinouts
• Getting Started with the Teensy
• Teensy XBee Adapter Hookup Guide
• Exploring XBees and XCTU
• Using OpenSegment: Counter/Analog Modes
• Transistors - Applications I: Switches
• How to Solder: Through-Hole Soldering

To add wireless I/O line passing, simply use a pair of XBee Series 1 radio each configured as a button and LED.

• 802.15.4 Digital Input w/ a Button: Configure the Radio
• 802.15.4 Digital Output w/ an LED: Configure the Radio

License Information

This project is open source!

Please review the LICENSE.md file for license information.

Distributed as-is; no warranty is given.

• Your friends at SparkFun.