BunnyPHP

Performant pure-PHP AMQP (RabbitMQ) sync/async (ReactPHP) library

Requirements

BunnyPHP requires PHP 7.1 and newer.

Installation

Add as Composer dependency:

$ composer require bunny/bunny:@dev

Comparison

You might ask if there isn't a library/extension to connect to AMQP broker (e.g. RabbitMQ) already. Yes, there are multiple options:

ext-amqp - PHP extension
php-amqplib - pure-PHP AMQP protocol implementation
react-amqp - ext-amqp binding to ReactPHP

Why should you want to choose BunnyPHP instead?

You want nice idiomatic PHP API to work with (I'm looking at you, php-amqplib). BunnyPHP interface follows PHP's common coding standards and naming conventions. See tutorial.
You can't (don't want to) install PECL extension that has latest stable version in 2014. BunnyPHP isn't as such marked as stable yet. But it is already being used in production.
You have both classic CLI/FPM and ReactPHP applications and need to connect to RabbitMQ. BunnyPHP comes with both synchronous and asynchronous clients with same PHP-idiomatic interface. Async client uses react/promise.

Apart from that BunnyPHP is more performant than main competing library, php-amqplib. See benchmark/ directory and php-amqplib's benchmark/.

Benchmarks were run as:

$ php benchmark/producer.php N & php benchmark/consumer.php

Library	N (# messages)	Produce sec	Produce msg/sec	Consume sec	Consume msg/sec
php-amqplib	100	0.0131	7633	0.0446	2242
bunnyphp	100	0.0128	7812	0.0488	2049
bunnyphp +/-			+2.3%		-8.6%
php-amqplib	1000	0.1218	8210	0.4801	2082
bunnyphp	1000	0.1042	9596	0.2919	3425
bunnyphp +/-			+17%		+64%
php-amqplib	10000	1.1075	9029	5.1824	1929
bunnyphp	10000	0.9078	11015	2.9058	3441
bunnyphp +/-			+22%		+78%
php-amqplib	100000	20.7005	4830	69.0360	1448
bunnyphp	100000	9.7891	10215	35.7305	2789
bunnyphp +/-			+111%		+92%

Tutorial

Connecting

When instantiating the BunnyPHP Client accepts an array with connection options:

$connection = [
    'host'      => 'HOSTNAME',
    'vhost'     => 'VHOST',    // The default vhost is /
    'user'      => 'USERNAME', // The default user is guest
    'password'  => 'PASSWORD', // The default password is guest
];

$bunny = new Client($connection);
$bunny->connect();

Connecting with SSL/TLS

Options for SSL-connections should be specified as array ssl:

$connection = [
    'host'      => 'HOSTNAME',
    'vhost'     => 'VHOST',    // The default vhost is /
    'user'      => 'USERNAME', // The default user is guest
    'password'  => 'PASSWORD', // The default password is guest
    'ssl'       => [
        'cafile'      => 'ca.pem',
        'local_cert'  => 'client.cert',
        'local_pk'    => 'client.key',
    ],
];

$bunny = new Client($connection);
$bunny->connect();

For options description - please see SSL context options.

Note: invalid SSL configuration will cause connection failure.

Publish a message

Now that we have a connection with the server we need to create a channel and declare a queue to communicate over before we can publish a message, or subscribe to a queue for that matter.

$channel = $bunny->channel();
$channel->queueDeclare('queue_name'); // Queue name

Publishing a message on a virtual host with quorum queues as a default

From RabbitMQ 4 queues will be standard defined as Quorum queues, those are by default durable, in order to connect to them you should use the queue declare method as follows. In the current version of RabbitMQ 3.11.15 this is already supported, if the virtual host is configured to have a default type of Quorum.

$channel = $bunny->channel();
$channel->queueDeclare('queue_name', false, true); // Queue name

With a communication channel set up, we can now publish a message to the queue:

$channel->publish(
    $message,    // The message you're publishing as a string
    [],          // Any headers you want to add to the message
    '',          // Exchange name
    'queue_name' // Routing key, in this example the queue's name
);

Subscribing to a queue

Subscribing to a queue can be done in two ways. The first way will run indefinitely:

$channel->run(
    function (Message $message, Channel $channel, Client $bunny) {
        $success = handleMessage($message); // Handle your message here

        if ($success) {
            $channel->ack($message); // Acknowledge message
            return;
        }

        $channel->nack($message); // Mark message fail, message will be redelivered
    },
    'queue_name'
);

The other way lets you run the client for a specific amount of time consuming the queue before it stops:

$channel->consume(
    function (Message $message, Channel $channel, Client $client){
        $channel->ack($message); // Acknowledge message
    },
    'queue_name'
);
$bunny->run(12); // Client runs for 12 seconds and then stops

Pop a single message from a queue

$message = $channel->get('queue_name');

// Handle message

$channel->ack($message); // Acknowledge message

Prefetch count

A way to control how many messages are prefetched by BunnyPHP when consuming a queue is by using the channel's QOS method. In the example below only 5 messages will be prefetched. Combined with acknowledging messages this turns into an effective flow control for your applications, especially asynchronous applications. No new messages will be fetched unless one has been acknowledged.

$channel->qos(
    0, // Prefetch size
    5  // Prefetch count
);

Asynchronous usage

Bunny supports both synchronous and asynchronous usage utilizing ReactPHP. The following example shows setting up a client and consuming a queue indefinitely.

(new Async\Client($eventLoop, $options))->connect()->then(function (Async\Client $client) {
   return $client->channel();
})->then(function (Channel $channel) {
   return $channel->qos(0, 5)->then(function () use ($channel) {
       return $channel;
   });
})->then(function (Channel $channel) use ($event) {
   $channel->consume(
       function (Message $message, Channel $channel, Async\Client $client) use ($event) {
           // Handle message

           $channel->ack($message);
       },
       'queue_name'
   );
});

AMQP interop

There is amqp interop compatible wrapper(s) for the bunny library.

Testing

Create client/server SSL certificates by running:

$ cd test/ssl && make all && cd -

You need access to a RabbitMQ instance in order to run the test suite. The easiest way is to use the provided Docker Compose setup to create an isolated environment, including a RabbitMQ container, to run the test suite in.

Docker Compose

Use Docker Compose to create a network with a RabbitMQ container and a PHP container to run the tests in. The project directory will be mounted into the PHP container.
```
$ docker-compose up -d
```
To test against different SSL configurations (as in CI builds), you can set environment variable CONFIG_NAME=rabbitmq.ssl.verify_none before running docker-compose up.

Optionally use docker ps to display the running containers.

$ docker ps --filter name=bunny
[...] bunny_rabbit_node_1_1
[...] bunny_bunny_1

Enter the PHP container.
```
$ docker exec -it bunny_bunny_1 bash
```
Within the container, run:
```
$ vendor/bin/phpunit
```

Contributing

Large part of the PHP code (almost everything in Bunny\Protocol namespace) is generated from spec in file spec/amqp-rabbitmq-0.9.1.json. Look for DO NOT EDIT! in doc comments.

To change generated files change spec/generate.php and run:
```
$ php ./spec/generate.php
```

Broker compatibility

Works well with RabbitMQ

Does not work with ActiveMQ because it requires AMQP 1.0 which is a completely different protocol (Bunny is implementing AMQP 0.9.1)

License

BunnyPHP is licensed under MIT license. See LICENSE file.

bckp/bunny