beagleboard/kernel

Issues

• Kerns

  #104 opened 3 years ago by Swifties12
  0

• 3.12: default config: Fedora

  #67 opened 5 years ago by RobertCNelson
  0

• mmcblk1 does not appear for new beaglebone black board

  #103 opened 5 years ago by awadhesh39
  5

• CPU Frequency Scaling doesn't work

  #102 opened 9 years ago by ViktorButskikh
  3

• Beaglebone Black fails in installing RTL8892CU WIfi module

  #39 opened 12 years ago by noisette
  5

• SPI: cs_change not working properly

  #85 opened 11 years ago by corrosion
  3

• Issue with Analog Inputs pins when BBB is connected to LCD7 Cape.

  #69 opened 11 years ago by ilovetogetspamed
  10

• modprobe g_hid always fails

  #75 opened 11 years ago by blackd
  2

• How to get this Kernel 3.14 work with 4DCAPE-43

  #101 opened 9 years ago by asebak
  1

• USB hotplugging

  #64 opened 11 years ago by jadonk
  22

• Configuring EDMA xbar not working in 3.12

  #87 opened 11 years ago by corrosion
  1

• Build 3.14...

  #94 opened 11 years ago by jiapei100
  9

• kernel build 3.12 fails

  #93 opened 11 years ago by chow04
  1

• Temperature sensor not working on 3.12 and later

  #91 opened 11 years ago by danieletorelli
  1

• McASP: writing to read-only bits.

  #86 opened 11 years ago by corrosion
  1

• unchanged build 3.12 fails

  #78 opened 11 years ago by Blindleistung
  2

• CPU Frequency Scaling not available for 3.12

  #80 opened 11 years ago by bigeagle
  2

• Use new pwm sysfs entries

  #82 opened 11 years ago by jadonk
  0

• omap_aes and dm-crypt problems

  #68 opened 11 years ago by birefringence
  15

• usb0 not available

  #74 opened 11 years ago by kkwekkeboom
  4

• git clone fails in patch.sh

  #1 opened 12 years ago by jadonk
  3

• MMC Hangs under load with multiple threads

  #70 opened 11 years ago by cdsteinkuehler
  2

• 3.13: recipes/linux-mainline_3.13.bb missing

  #71 opened 11 years ago by mrybczyn
  1

• dcan0 alias fck already exist

  #63 opened 11 years ago by kkwekkeboom
  0

• Add eQEP support

  #61 opened 11 years ago by jadonk
  0

• Beaglebone Black support?

  #60 opened 11 years ago by dvial
  6

• Touchscreen part of TSCADC not working for beaglebone

  #11 opened 11 years ago by koenkooi
  1

• MMC support using capebus isn't working

  #10 opened 11 years ago by koenkooi
  2

• Dynamically loadable devicetree fragments

  #16 opened 11 years ago by jadonk
  0

• 512MB support

  #15 opened 11 years ago by jadonk
  4

• Composite USB with mass storage and gadget Ethernet

  #18 opened 11 years ago by jadonk
  1

• BeBoPr cape DT overlay compiled in kernel is not fixed for new adc mapping.

  #55 opened 11 years ago by modmaker
  13

• Building uImage for 3.11 with stock config fails.

  #52 opened 11 years ago by Ferroin
  2

• Best Practice to update

  #51 opened 11 years ago by 17twenty
  1

• bone-pinmux-helper does not enable GPIO modules

  #45 opened 12 years ago by piranha32
  0

• Audio support

  #17 opened 12 years ago by jadonk
  2

• make oldconfig issue when following instructions

  #38 opened 12 years ago by 17twenty
  2

• PRUSS not working

  #37 opened 12 years ago by cmicali
  6

• [3.8 branch] patch.sh is failing on camera/0004-soc_camera patch

  #36 opened 12 years ago by cmicali
  2

• 3.8 Crash on reboot

  #26 opened 12 years ago by 17twenty
  2

• IRC service hook

  #28 opened 12 years ago by jadonk
  2

• Instructions for 3.8 are different for a vfat partitioned disk

  #25 opened 12 years ago by 17twenty
  0

• The first run of patch.sh (3.8 branch) takes a very long time

  #22 opened 12 years ago by bradfa
  2

• HDMI timing incorrect

  #9 opened 12 years ago by jadonk
  12

• (Regression) Panda ES: hsmmc broken: (non-device tree)

  #12 opened 12 years ago by RobertCNelson
  0