beegee-tokyo

PrivatManila

Pinned Repositories

CCTVview
Simple ONVIF RTSP camera viewer for Android
Language:Java40 6 315
DHTesp
Optimized DHT library for ESP32/ESP8266 using Arduino framework
Language:C++235 15 061
disaster-radio-android
Chat application to be used with
Language:Java34 9 13
LoRa-P2P-Gateway
LoRa P2P gateway to MQTT broker or HTTP POST service
Language:C++2 1 00
Meshtastic-Sensor-Network
Setup a sensor network using Meshtastic mesh network and MQTT broker
Language:JavaScript14 3 02
SX126x-Arduino
Arduino library to use Semtech SX126x LoRa chips and modules to communicate
Language:C++237 18 11166
SX126x-Mesh-Network
A simple LoRa Mesh network low level layer for the Semtech SX126x transceivers.
Language:C++30 6 412
WisBlock-API-V2
WisBlock API V2 for RAK4631 takes care of all the LoRaWAN, BLE, AT command functionality. It makes development of event driven power savings applications easy. RUI3 AT command compatible allows the usage of RAKwireless' WisToolBox to setup the device.
Language:C++13 3 35
WisBlock-IAQ-PM-CO2-VOC-EPD
Build a indoor air quality sensor with the WisBlock eco system.
Language:C3 3 00
WisBlock-Toolbox
Compagnion to the WisBlock API which supports the OTA DFU firmware update and the LoRa® / LoRaWAN® configuration over BLE.
Language:Java4 3 05

beegee-tokyo's Repositories

beegee-tokyo/SX126x-Arduino
Arduino library to use Semtech SX126x LoRa chips and modules to communicate
Language:C++237 18 11166
beegee-tokyo/SX1262-SC-GW
Single channel LoRaWan gateway for ESP8266/ESP32 using Semtech SX1262 LoRa module
Language:C++21 4 35
beegee-tokyo/Meshtastic-Sensor-Network
Setup a sensor network using Meshtastic mesh network and MQTT broker
Language:JavaScript14 3 02
beegee-tokyo/WisBlock-API-V2
WisBlock API V2 for RAK4631 takes care of all the LoRaWAN, BLE, AT command functionality. It makes development of event driven power savings applications easy. RUI3 AT command compatible allows the usage of RAKwireless' WisToolBox to setup the device.
Language:C++13 3 35
beegee-tokyo/nRF52_OLED
An I2C/SPI display driver for SSD1306/SH1106 oled displays connected to an nRF52
Language:C9 2 01
beegee-tokyo/WisBlock-Sensor-For-LoRaWAN
Firmware for RAKwireless WisBlock RAK4631 Core module.
Language:C9 4 1
beegee-tokyo/RUI3-LowPower-Example
Example how to achieve lowest power consumption with a custom firmware created with RUI3
Language:C++6 4 23
beegee-tokyo/WisBlock-Seismic-Sensor
Example for WisBlock RAK12027 Seismic Sensor based on the Omron D7S. This repo includes the code for RAK4631 based on Arduino and the RAK4631-R and RAK3172 based on RAK's RUI3
Language:C++6 3 02
beegee-tokyo/WisBlock-Toolbox
Compagnion to the WisBlock API which supports the OTA DFU firmware update and the LoRa® / LoRaWAN® configuration over BLE.
Language:Java4 3 05
beegee-tokyo/RUI3-Signal-Meter-P2P-LPWAN-UI
This is a PoC of a very basic signal tester. It works in both LoRa P2P and LoRaWAN mode. It uses a simple OLED display and a simple one-button controlled UI for settings changes.
Language:C++3 1 0
beegee-tokyo/Hydroponic-Control-System
A hydroponic control system built with RAKwireless WisBlock modules
Language:C++2 3 02
beegee-tokyo/LoRa-P2P-Gateway
LoRa P2P gateway to MQTT broker or HTTP POST service
Language:C++2 1 00
beegee-tokyo/RAK4631-Kit-2-RAK1910-RAK1904-RAK1906
Example code for WisBlock GNSS tracker with RAK1910 GNSS module, RAK1904 acceleration sensor and RAK1906 Environment sensor (optional, not included in Kit 2)
Language:C++2 4 1
beegee-tokyo/RAK4631-Kit-4-RAK1906
Example code for WisBlock Environment Sensor with RAK1906 environment sensor
Language:C++2 3 01
beegee-tokyo/Blues-Minimal-I2C
This library covers the communication between a RAKwireless WisCore module and a Blues.IO Notecard over I2C.
Language:C++1 2 0
beegee-tokyo/ClusterDuck-Protocol
Firmware for an ad-hoc mesh network of Internet-of-Things devices based on LoRa (Long Range radio) that can be deployed quickly and at low cost.
Language:C++1 1 0
beegee-tokyo/PicoSoftwareSerial
Quick 'n' dirty PIO based implementation of SoftwareSerial for an RP2040 based board
Language:C++1 2 0
beegee-tokyo/RAK11200-SMA-Sunnyboy
WisBlock application to read production data from a SMA Sunnyboy Solar Inverter
Language:C++1 2 0
beegee-tokyo/RAK4631-RAK14014-Demo
Simple demo for the RAK14014 TFT display
Language:C1 3 0
beegee-tokyo/RUI3-Signal-Meter-P2P-LPWAN
PoC of a very basic signal tester. It works in both LoRa P2P and LoRaWAN mode.
Language:C++1 2 0
beegee-tokyo/Blues-WisBlock-Tracker
A LoRaWAN + Cellular connected location tracker using WisBlock and the Blues.IO NoteCard
Language:C++2 0
beegee-tokyo/Hummingbird-Blues-Gateway
WisBlock LoRa P2P devices send data to WisBlock Blues Notecard gateway.
Language:C++2 0
beegee-tokyo/library-registry
Arduino Library Manager list
1 0
beegee-tokyo/Low-Power-PIO
A simple example code how to build a low-power device based on WisBlock modules with the WisBlock-API-V2
Language:C++2 0
beegee-tokyo/RAK-OneWireSerial
This library provides functions to communicate over a one wire serial interface with slave modules This protocol is used by RAK2560 SensorHub
Language:C1 0
beegee-tokyo/RAK13015
This library is the interface to the different interfaces provides by the RAK13015 module. It supports the three 4-20mA interfaces, the two 0-30V analog interfaces and the RS485 interface.
Language:C++1 0
beegee-tokyo/RAKwireless_RAK14000_EPD_2_13
RAKWireless library for the RAK14000 EPD module
Language:C++2 0
beegee-tokyo/RUI3-Arduino-Library
RAKWireless library for communication over UART with RUI3 based WisDuo modules.
Language:C++1 21
beegee-tokyo/RUI3-Signal-Meter-P2P-LPWAN-SD
This is a PoC of a very basic signal tester. It works in both LoRa P2P and LoRaWAN mode. It uses a simple OLED display and a simple one-button controlled UI for settings changes. In addition, it can use an SD card to save the test results in .CSV files.
Language:C++1
beegee-tokyo/WisBlock-HW-Tester
Test application to do a basic hardware test with WisBlock Base Boards, WisBlock Core RAK4631 and WisBlock modules and displays.
Language:C++