The R
package splithalf provides tools to estimate the internal
consistency reliability of cognitive measures. In particular, the tools
were developed for application to tasks that use difference scores as
the main outcome measure, for instance the Stroop score or dot-probe
attention bias index (average RT in incongruent trials minus average RT
in congruent trials).
The methods in splithalf are built around split half reliability estimation. To increase the robustness of these estimates, the package implements a permutation approach that takes a large number of random (without replacement) split halves of the data. For each permutation the correlation between halves is calculated, with the Spearman-Brown correction applied (Spearman 1904). This process generates a distribution of reliability estimates from which we can extract summary statistics (e.g. average and 95% HDI).
while many cognitive tasks yield robust effects (e.g. everybody shows a Stroop effect) they may not yield reliable individual differences (Hedge, Powell, and Sumner 2018). As these measures are used in questions of individual differences researchers need to have some psychometric information for the outcome measures. Recently, it was proposed that psychological science should set a standard expectation for the reporting of reliability information for cognitive and behavioural measures (2019). splithalf was developed to support this proposition by providing a tool to easily extract internal consistency reliability estimates from behavioural measures. ## Installation
The latest release version (0.7.1
unofficial version name: Kitten
Mittens) can be installed from CRAN:
install.packages("splithalf")
The current developmental version can be installed from Github with:
devtools::install_github("sdparsons/splithalf")
splithalf requires the tidyr (Wickham and Henry 2019) and
dplyr (Wickham et al. 2018) packages for data handling within the
functions. The robustbase package is used to extract median scores
when applicable. The computationally heavy tasks (extracting many random
half samples of the data) are written in c++
via the R
package
Rcpp (Eddelbuettel et al. 2018). Figures use the ggplot package
(Wickham 2016), raincloud plots use code adapted from Allen et
al. (Allen et al. 2019), and the patchwork package (Pedersen 2019)
is used for plotting the multiverse analyses.
Citing packages is one way for developers to gain some recognition for the time spent maintaining the work. I would like to keep track of how the package is used so that I can solicit feedback and improve the package more generally. This would also help me track the uptake of reporting measurement reliability over time.
Please use the following reference for the code: Parsons, Sam (2020): splithalf: robust estimates of split half reliability. figshare. Software. https://doi.org/10.6084/m9.figshare.11956746.v4
Developing the splithalf package is a labour of love (and occasionally burning hatred). If you have any suggestions for improvement, additional functionality, or anything else, please contact me (sam.parsons@psy.ox.ac.uk) or raise an issue on github (https://github.com/sdparsons/splithalf). Likewise, if you are having trouble using the package (e.g. scream fits at your computer screen – we’ve all been there) do contact me and I will do my best to help as quickly as possible. These kind of help requests are super welcome. In fact, the package has seen several increases in performance and usability due to people asking for help.
Now on github and submitted to CRAN: VERSION 0.7.2 [unofficial version name: “Kitten Mittens”] Featuring reliability multiverse analyses!!!
This update includes the addition of reliability multiverse functions. A splithalf object can be inputted into splithalf.multiverse to estimate reliability across a user-defined list of data-processing specifications (e.g. min/max RTs). Then, because sometimes science is more art than science, the multiverse output can be plotted with multiverse.plot. A brief tutorial can be found below, and a more comprehensive one can be found in a recent preprint (Parsons 2020b).
Additionally, the output of splithalf has been reworked. Now a list is returned including the specific function calls, the processed data.
Since version 0.6.2 a user can also set plot = TRUE
in splithalf to
generate a raincloud plot of the distribution of reliability estimates.
It is important that we have a similar understanding of the terminology I use in the package and documentation. Each is also discussed in reference to the functions later in the documentation.
- Trial – whatever happens in this task, e.g. a stimuli is presented. Importantly, participants give one response per trial
- Trial type – often trials can be split into different trial types (e.g. to compare congruent and incongruent trials)
- Condition - this might be different blocks of trials, or something to be assessed separately within the functions. e.g. a task might have a block of ‘positive’ trials and a block of ‘negative’ trials.
- Datatype - I use this to refer to the outcome of interest. specifically whether one is interested in average response times or accuracy rates
- Score - I use score to indicate how the final outcome is measured; e.g. the average RT, or the difference between two average RTs, or even the difference between two differences between two RTs (yes, the final one is confusing)
The core function splithalf requires that the input dataset has already undergone preprocessing (e.g. removal of error trials, RT trimming, and participants with high error rates). Splithalf should therefore be used with the same data that will be used to calculate summary scores and outcome indices. The exception is in multiverse analyses, as described below.
For those unfamiliar with R, the following snippets may help with common data-processing steps. I also highly recommend the Software Carpentry course “R for Reproducible Scientific Analysis” (https://swcarpentry.github.io/r-novice-gapminder/).
Note == indicates ‘is equal to’, :: indicates that the function uses the package indicated, in the first case the dplyr package (Wickham et al. 2018).
dataset %>%
filter(accuracy == 1) %>% ## keeps only trials in which participants made an accurate response
filter(RT >= 100, RT <= 2000) %>% ## removes RTs less than 100ms and greater than 2000ms
filter(participant != c(“p23”, “p45”) ## removes participants “p23” and “p45”
If following rt trims you also trimmed by SD, use the following as well. Note that this is for two standard deviations from the mean, within each participant, and within each condition and trialtype.
dataset %>%
dplyr::group_by(participant, condition, compare) %>%
dplyr::mutate(low = mean(RT) - (2 * sd(RT)),
high = mean(RT) + (2 * sd(RT))) %>%
dplyr::filter(RT >= low & RT <= high)
If you want to save yourself effort in running splithalf, you could also rename your variable (column) names to the function defaults using the following
dplyr::rename(dataset,
RT = "latency",
condition = FALSE,
participant = "subject",
correct = "correct",
trialnum = "trialnum",
compare = "congruency")
The following examples assume that you have already processed your data to remove outliers, apply any RT cutoffs, etc. A reminder: the data you input into splithalf should be the same as that used to create your final scores - otherwise the resultant estimates will not accurately reflect the reliability of your data.
These questions should feed into what settings are appropriate for your need, and are aimed to make the splithalf function easy to use.
- What type of data do you have?
Are you interested in response times, or accuracy rates?
Knowing this, you can set outcome = "RT"
, or outcome = "accuracy"
- How is your outcome score calculated?
Say that your response time based task has two trial types;
“incongruent” and “congruent”. When you analyse your data will you
use the average RT in each trial type, or will you create a difference
score (or bias) by e.g. subtracting the average RT in congruent trials
from the average RT in incongruent trials. The first can be called with
score = "average"
and the second with score = "difference"
.
- Which method would you like to use to estimate (split-half) reliability?
A super common way is to split the data into odd and even trials.
Another is to split by the first half and second half of the trials.
Both approaches are implemented in the splithalf funciton. However, I
believe that the permutation splithalf approach is the most applicable
in general and so the default is halftype = "random"
For this brief example, we will simulate some data for 60 participants, who each completed a task with two blocks (A and B) of 80 trials. Trials are also evenly distributed between “congruent” and “incongruent” trials. For each trial we have RT data, and are assuming that participants were accurate in all trials.
n_participants = 60 ## sample size
n_trials = 80
n_blocks = 2
sim_data <- data.frame(participant_number = rep(1:n_participants, each = n_blocks * n_trials),
trial_number = rep(1:n_trials, times = n_blocks * n_participants),
block_name = rep(c("A","B"), each = n_trials, length.out = n_participants * n_trials * n_blocks),
trial_type = rep(c("congruent","incongruent"), length.out = n_participants * n_trials * n_blocks),
RT = rnorm(n_participants * n_trials * n_blocks, 500, 200),
ACC = 1)
This is by far the most common outcome measure I have come across, so lets start with that.
Our data will be analysed so that we have two ‘bias’ or ‘difference score’ outcomes. So, within each block, we will take the average RT in congruent trials and subtract the average RT in incongruent trials. Calculating the final scores for each participant and for each block separately could be done as follows:
library("dplyr")
library("tidyr")
sim_data %>%
group_by(participant_number, block_name, trial_type) %>%
summarise(average = mean(RT)) %>%
spread(trial_type, average) %>%
mutate(bias = congruent - incongruent)
# A tibble: 120 x 5
# Groups: participant_number, block_name [120]
participant_number block_name congruent incongruent bias
<int> <fct> <dbl> <dbl> <dbl>
1 1 A 462. 452. 10.2
2 1 B 454. 481. -26.9
3 2 A 488. 445. 43.4
4 2 B 504. 522. -18.1
5 3 A 538. 511. 27.0
6 3 B 517. 545. -28.2
7 4 A 488. 467. 21.2
8 4 B 496. 515. -19.8
9 5 A 515. 482. 32.7
10 5 B 474. 534. -60.0
# ... with 110 more rows
To estimate reliability with splithalf we run the following.
library("splithalf")
difference <- splithalf(data = sim_data,
outcome = "RT",
score = "difference",
conditionlist = c("A", "B"),
halftype = "random",
permutations = 5000,
var.RT = "RT",
var.condition = "block_name",
var.participant = "participant_number",
var.compare = "trial_type",
compare1 = "congruent",
compare2 = "incongruent",
average = "mean",
plot = TRUE)
condition n splithalf 95_low 95_high spearmanbrown SB_low SB_high
1 A 60 0.01 -0.16 0.20 0.02 -0.27 0.34
2 B 60 0.10 -0.08 0.28 0.16 -0.15 0.44
Specifying plot = TRUE
will also allow you to plot the distributions
of reliability estimates. you can extract the plot from a saved object
with e.g. difference$plot
.
The splithalf output gives estimates separately for each condition defined (if no condition is defined, the function assumes that you have only a single condition, which it will call “all” to represent that all trials were included).
The second column (n) gives the number of participants analysed. If, for some reason one participant has too few trials to analyse, or did not complete one condition, this will be reflected here. I suggest you compare this n to your expected n to check that everything is running correctly. If the ns dont match, we have a problem. More likely, R will give an error message, but useful to know.
Next are the estimates; the splithalf column and the associated 95% percentile intervals, and the Spearman-Brown corrected estimate with its own percentile intervals. Unsurprisingly, our simlated random data does not yield internally consistant measurements.
What should I report? My preference is to report everything. 95% percentiles of the estimates are provided to give a picture of the spread of internal consistency estimates. Also included is the spearman-brown corrected estimates, which take into account that the estimates are drawn from half the trials that they could have been. Negative reliabilities are near uninterpretable and the spearman-brown formula is not useful in this case.
We estimated the internal consitency of bias A and B using a permutation-based splithalf approach (Parsons 2020a) with 5000 random splits. The (Spearman-Brown corrected) splithalf internal consistency of bias A was were rSB = 0.02, 95%CI [-0.27,0.34].
— Parsons, 2020
For some tasks the outcome measure may simply be the average RT. In this case, we will ignore the trial type option. We will extract separate outcome scores for each block of trials, but this time it is simply the average RT in each block. Note that the main difference in this code is that we have omitted the inputs about what trial types to ‘compare’, as this is irrelevant for the current task.
average <- splithalf(data = sim_data,
outcome = "RT",
score = "average",
conditionlist = c("A", "B"),
halftype = "random",
permutations = 5000,
var.RT = "RT",
var.condition = "block_name",
var.participant = "participant_number",
average = "mean")
Warning in splithalf(data = sim_data, outcome = "RT", score = "average", :
var.trialnum will soon be depreciated
condition n splithalf 95_low 95_high spearmanbrown SB_low SB_high
1 A 60 -0.01 -0.18 0.18 -0.02 -0.30 0.30
2 B 60 0.07 -0.10 0.26 0.12 -0.18 0.41
The difference of differences score is a bit more complex, and perhaps also less common. I programmed this aspect of the package initially because I had seen a few papers that used a change in bias score in their analysis, and I wondered “I wonder how reliable that is as an individual difference measure”. Be warned, difference scores are nearly always less reliable than raw averages, and differences-of-differences will be less reliable again.
Our difference-of-difference variable in our task is the difference between bias observed in block A and B. So our outcome is calculated something like this.
BiasA = incongruent_A - congruent_A
BiasB = incongruent_B - congruent_B
Outcome = BiasB - BiasA
In our function, we specify this very similarly as in the difference score example. The only change will be changing the score to “difference_of_difference”. Note that we will keep the condition list consisting of A and B. But, specifying that we are interested in the difference of differences will lead the function to calculate the outcome scores apropriately.
diff_of_diff <- splithalf(data = sim_data,
outcome = "RT",
score = "difference_of_difference",
conditionlist = c("A", "B"),
halftype = "random",
permutations = 5000,
var.RT = "RT",
var.condition = "block_name",
var.participant = "participant_number",
var.compare = "trial_type",
compare1 = "congruent",
compare2 = "incongruent",
average = "mean")
Warning in splithalf(data = sim_data, outcome = "RT", score =
"difference_of_difference", : var.trialnum will soon be depreciated
condition n splithalf 95_low 95_high spearmanbrown SB_low SB_high
1 change score 60 0.15 -0.02 0.34 0.26 -0.03 0.5
This example is simplified from Parsons (2020b). The process takes four steps. First, specify a list of data processing decisions. Here, we’ll specify only removing trials greater or lower than a specified amount. More options are available, such as total accuracy cutoff thresholds for participant removals.
specifications <- list(RT_min = c(0, 100, 200),
RT_max = c(1000, 2000),
averaging_method = c("mean", "median"))
Second, perform splithalf(...)
. The key difference here is …
difference <- splithalf(data = sim_data,
outcome = "RT",
score = "difference",
conditionlist = c("A"),
halftype = "random",
permutations = 5000,
var.RT = "RT",
var.condition = "block_name",
var.participant = "participant_number",
var.compare = "trial_type",
var.ACC = "ACC",
compare1 = "congruent",
compare2 = "incongruent",
average = "mean")
Warning in splithalf(data = sim_data, outcome = "RT", score = "difference", :
var.trialnum will soon be depreciated
Third, perform splithalf.multiverse
with the specification list and
splithalf objects as inputs
multiverse <- splithalf.multiverse(input = difference,
specifications = specifications)
Finally, plot the multiverse with plot.multiverse.
multiverse.plot(multiverse = multiverse,
title = "README multiverse")
For more information, see Parsons (2020).
To examine how many random splits are required to provide a precise estimate, a short simulation was performed including 20 estimates of the spearman-brown reliability estimate, for each of 1, 10, 50, 100, 1000, 2000, 5000, 10000, and 20000 random splits. This simulation was performed on data from one block of 80 trials. Based on this simulation, I recommend 5000 (or more) random splits be used to calculate split-half reliability. 5000 permutations yielded a standard deviation of .002 and a total range of .008, indicating that the reliability estimates are stable to two decimal places with this number of random splits. Increasing the number of splits improved precision, however 20000 splits were required to reduce the standard deviation to .001.
The speed of splithalf rests entirely on the number of conditions,
participants, and permutations. The biggest factor will be your machine
speed. For relative times, I ran a simulation with a range of sample
sizes, numbers of conditions, numbers of trials, and permutations. The
data is contained within the package as data/speedtest.csv
The splithalf package is still under development. If you have suggestions for improvements to the package, or bugs to report, please raise an issue on github (https://github.com/sdparsons/splithalf). Currently, I have the following on my immediate to do list:
- error tracking
- I plan to develop a function that catches potential issues that could arise with the functions.
- I also plan to document common R warnings and errors that arise and why (as sometimes without knowing exactly how the functions work these issues can be harder to trace back).
- include other scoring methods:
- signal detection, e.g. d prime
- potentially customisable methods, e.g. where the outcome is scored in formats similar to A - B / A + B
splithalf is the only package to implement all of these tools, in
particular reliability multiverse analyses. Some other R
packages
offer a bootstrapped approach to split-half reliability multicon
(Sherman 2015), psych (Revelle 2019), and splithalfr (Pronk
2020)
Allen, Micah, Davide Poggiali, Kirstie Whitaker, Tom Rhys Marshall, and Rogier A. Kievit. 2019. “Raincloud Plots: A Multi-Platform Tool for Robust Data Visualization.” Wellcome Open Research 4 (April): 63. https://doi.org/10.12688/wellcomeopenres.15191.1.
Eddelbuettel, Dirk, Romain Francois, JJ Allaire, Kevin Ushey, Qiang Kou, Nathan Russell, Douglas Bates, and John Chambers. 2018. Rcpp: Seamless R and C++ Integration. https://CRAN.R-project.org/package=Rcpp.
Hedge, Craig, Georgina Powell, and Petroc Sumner. 2018. “The Reliability Paradox: Why Robust Cognitive Tasks Do Not Produce Reliable Individual Differences.” Behavior Research Methods 50 (3): 1166–86. https://doi.org/10.3758/s13428-017-0935-1.
Parsons, Sam. 2020a. Splithalf: Robust Estimates of Split Half Reliability. https://doi.org/10.6084/m9.figshare.11956746.v4.
———. 2020b. “Exploring Reliability Heterogeneity with Multiverse Analyses: Data Processing Decisions Unpredictably Influence Measurement Reliability.” Preprint, June. https://doi.org/10.31234/osf.io/y6tcz.
Parsons, Sam, Anne-Wil Kruijt, and Elaine Fox. 2019. “Psychological Science Needs a Standard Practice of Reporting the Reliability of Cognitive Behavioural Measurements.” Advances in Methods; Practices in Psychological Science. https://doi.org/doi.org/10.1177/2515245919879695.
Pedersen, Thomas Lin. 2019. Patchwork: The Composer of Plots. https://CRAN.R-project.org/package=patchwork.
Pronk, Thomas. 2020. Splithalfr: Extensible Bootstrapped Split-Half Reliabilities. https://CRAN.R-project.org/package=splithalfr.
Revelle, William. 2019. Psych: Procedures for Psychological, Psychometric, and Personality Research. Evanston, Illinois: Northwestern University. https://CRAN.R-project.org/package=psych.
Sherman, Ryne A. 2015. Multicon: Multivariate Constructs. https://CRAN.R-project.org/package=multicon.
Spearman, C. 1904. “The Proof and Measurement of Association Between Two Things.” The American Journal of Psychology 15 (1): 72. https://doi.org/10.2307/1412159.
Wickham, Hadley. 2016. Ggplot2: Elegant Graphics for Data Analysis. Springer-Verlag New York. https://ggplot2.tidyverse.org.
Wickham, Hadley, Romain François, Lionel Henry, and Kirill Müller. 2018. Dplyr: A Grammar of Data Manipulation. https://CRAN.R-project.org/package=dplyr.
Wickham, Hadley, and Lionel Henry. 2019. Tidyr: Tidy Messy Data. https://CRAN.R-project.org/package=tidyr.