A (somewhat opinionated) list of SQL tips and tricks that I've picked up over the years.
There's so much you can you do with SQL but I've focused on what I find most useful in my day-to-day work as a data analyst and what I wish I had known when I first started writing SQL.
Please note that some of these tips might not be relevant for all RDBMs. For example, the ::
syntax (tip 5) does not work in SQLite.
- Use a leading comma to separate fields
- Use a dummy value in the WHERE clause
- Indent your code
- Consider CTEs when writing complex queries
- Anti-joins will return rows not present in another table
- Use
QUALIFY
to filter window functions - You can (but shouldn't always)
GROUP BY
column position - You can create a grand total with
GROUP BY ROLLUP
- Use
EXCEPT
to find the difference between two datasets
- Be aware of how
NOT IN
behaves withNULL
values - Avoid ambiguity when renaming calculated fields
- Always specify which column belongs to which table
- Understand the order of execution
- Comment your code!
- Read the documentation (in full)
- Use descriptive names for your saved queries
Use a leading comma to separate fields in the SELECT
clause rather than a trailing comma.
-
Clearly defines that this is a new column vs code that's wrapped to multiple lines.
-
Visual cue to easily identify if the comma is missing or not. Varying line lengths makes it harder to determine.
SELECT
employee_id
, employee_name
, job
, salary
FROM employees
;
- Also use a leading
AND
in theWHERE
clause, for the same reasons (following tip demonstrates this).
Use a dummy value in the WHERE
clause so you can easily comment out conditions when testing or tweaking a query.
-- If I want to comment out the job condition the following query will break.
SELECT *
FROM employees
WHERE
--job IN ('Clerk', 'Manager')
AND dept_no != 5
;
-- With a dummy value there's no issue. I can comment out all the conditions and 1=1 will ensure the query still runs.
SELECT *
FROM employees
WHERE 1=1
-- AND job IN ('Clerk', 'Manager')
AND dept_no != 5
;
Indent your code to make it more readable to colleagues and your future self.
Opinions will vary on what this looks like so be sure to follow your company/team's guidelines or, if that doesn't exist, go with whatever works for you.
You can also use an online formatter like poorsql or a linter like sqlfluff.
SELECT
vc.video_id
, CASE WHEN meta.GENRE IN ('Drama', 'Comedy') THEN 'Entertainment' ELSE meta.GENRE END as content_type
FROM video_content AS vc
INNER JOIN metadata ON vc.video_id = metadata.video_id
;
-- Good:
SELECT
vc.video_id
, CASE
WHEN meta.GENRE IN ('Drama', 'Comedy') THEN 'Entertainment'
ELSE meta.GENRE
END AS content_type
FROM video_content
INNER JOIN metadata
ON video_content.video_id = metadata.video_id
;
For longer than I'd care to admit I would nest inline views, which would lead to queries that were hard to understand, particularly if revisited after a few weeks.
If you find yourself nesting inline views more than 2 or 3 levels deep, consider using common table expressions, which can help you keep your code more organised and readable.
/*
The following query doesn't actually need to use an inline view or CTE but I'm just
demonstrating the difference between the two.
*/
-- Using nested inline views.
SELECT
vhs.movie
, vhs.vhs_revenue
, cs.cinema_revenue
FROM
(
SELECT
movie_id
, SUM(ticket_sales) AS cinema_revenue
FROM tickets
GROUP BY movie_id
) AS cs
INNER JOIN
(
SELECT
movie
, movie_id
, SUM(revenue) AS vhs_revenue
FROM blockbuster
GROUP BY movie, movie_id
) AS vhs
ON cs.movie_id = vhs.movie_id
;
-- Using CTEs.
WITH cinema_sales AS
(
SELECT
movie_id
, SUM(ticket_sales) AS cinema_revenue
FROM tickets
GROUP BY movie_id
),
vhs_sales AS
(
SELECT
movie
, movie_id
, SUM(revenue) AS vhs_revenue
FROM blockbuster
GROUP BY movie, movie_id
)
SELECT
vhs.movie
, vhs.vhs_revenue
, cs.cinema_revenue
FROM cinema_sales AS cs
INNER JOIN vhs_sales AS vhs
ON cs.movie_id = vhs.movie_id
;
Anti-joins are incredible useful, mostly (in my experience) for when you only want to return rows/values from one table that aren't present in another table.
- You could instead use a subquery although you might want to experiment as to which method is faster.
-- Anti-join.
SELECT
video_content.*
FROM video_content
LEFT JOIN archive
on video_content.series_id = archive.series_id
WHERE 1=1
AND archive.series_id IS NULL -- Any rows with no match will have a NULL value.
;
-- Subquery.
SELECT
*
FROM video_content
WHERE 1=1
AND series_id NOT IN (SELECT DISTINCT SERIES_ID FROM archive) -- Be mindful of NULL values.
;
-- Correlated subquery.
SELECT
*
FROM video_content vc
WHERE 1=1
AND NOT EXISTS (
SELECT 1
FROM archive a
WHERE a.series_id = vc.series_id
)
;
QUALIFY
lets you filter the results of a query based on a window function. This is useful for a variety of reasons, including to
reduce the number of lines of code needed.
For example, if I want to return the top 10 markets per product I can use
QUALIFY
rather than an inline view:
-- Using QUALIFY:
SELECT
product
, market
, SUM(revenue) AS market_revenue
FROM sales
GROUP BY product, market
QUALIFY DENSE_RANK() OVER (PARTITION BY product ORDER BY SUM(revenue) DESC) <= 10
ORDER BY product, market_revenue
;
-- Without QUALIFY:
SELECT
product
, market
, market_revenue
FROM
(
SELECT
product
, market
, SUM(revenue) AS market_revenue
, DENSE_RANK() OVER (PARTITION BY product ORDER BY SUM(revenue) DESC) AS market_rank
FROM sales
GROUP BY product, market
)
WHERE market_rank <= 10
ORDER BY product, market_revenue
;
Instead of using the column name, you can GROUP BY
or ORDER BY
using the
column position.
- This can be useful for ad-hoc/one-off queries, but for production code you should always refer to a column by its name.
SELECT
dept_no
, SUM(salary) AS dept_salary
FROM employees
GROUP BY 1 -- dept_no is the first column in the SELECT clause.
ORDER BY 2 DESC
;
Creating a grand total (or sub-totals) is possible thanks to GROUP BY ROLLUP
.
For example, if you've aggregated a company's employees salary per department you
can use GROUP BY ROLLUP
to create a grand total that sums up the aggregated
dept_salary
column.
SELECT
COALESCE(dept_no, 'Total') AS dept_no
, SUM(salary) AS dept_salary
FROM employees
GROUP BY ROLLUP(dept_no)
ORDER BY dept_salary -- Be sure to order by this column to ensure the Total appears last/at the bottom of the result set.
;
EXCEPT
returns rows from the first query's result set that don't appear in the second query's result set.
-- Miles Davis will be returned from this query.
SELECT Name
FROM artist
WHERE name = 'Miles Davis'
EXCEPT
SELECT Name
FROM artist
WHERE name = 'Nirvana'
;
-- Nothing will be returned from this query as 'Miles Davis' appears in both queries' result sets.
SELECT Name
FROM artist
WHERE name = 'Miles Davis'
EXCEPT
SELECT Name
FROM artist
WHERE name = 'Miles Davis'
;
NOT IN
doesn't work if NULL
is present in the values being checked against. As NULL
represents Unknown the SQL engine can't verify that the value being checked is not present in the list.
- Instead use
NOT EXISTS
.
INSERT INTO departments (id)
VALUES (1), (2), (NULL);
-- Doesn't work due to NULL being present.
SELECT *
FROM employees
WHERE department_id NOT IN (SELECT DISTINCT id from departments)
;
-- Solution.
SELECT *
FROM employees e
WHERE NOT EXISTS (
SELECT 1
FROM departments d
WHERE d.id = e.department_id
)
;
When creating a calculated field, you might be tempted to rename it to an existing column, but this can lead to unexpected behaviour, such as a window function operating on the wrong field.
CREATE TABLE products (
product VARCHAR(50) NOT NULL,
revenue INT NOT NULL
)
;
INSERT INTO products (product, revenue)
VALUES
('Shark', 100),
('Robot', 150),
('Alien', 90);
-- The window function will rank the 'Robot' product as 1 when it should be 3.
SELECT
product
, CASE product WHEN 'Robot' THEN 0 ELSE revenue END AS revenue
, RANK() OVER (ORDER BY revenue DESC)
FROM products
;
-- You can instead do this:
SELECT
product
, CASE product WHEN 'Robot' THEN 0 ELSE revenue END AS revenue
, RANK() OVER (ORDER BY CASE product WHEN 'Robot' THEN 0 ELSE revenue END DESC)
FROM products
;
When you have complex queries with multiple joins, it pays to be able to trace back an issue with a value to its source.
Additionally, your RDBMS might raise an error if two tables share the same column name and you don't specify which column you are using.
SELECT
vc.video_id
, vc.series_name
, metadata.season
, metadata.episode_number
FROM video_content AS vc
INNER JOIN video_metadata AS metadata
ON vc.video_id = metadata.video_id
;
If I had to give one piece of advice to someone learning SQL, it'd be to understand the order of execution (of clauses). It will completely change how you write queries. This blog post is a fantastic resource for learning.
While in the moment you know why you did something, if you revisit the code weeks, months or years later you might not remember.
- In general you should strive to write comments that explain why you did something, not how.
- Your colleagues and future self will thank you!
SELECT
video_content.*
FROM video_content
LEFT JOIN archive -- New CMS cannot process archive video formats.
ON video_content.series_id = archive.series_id
WHERE 1=1
AND archive.series_id IS NULL
;
Using Snowflake I once needed to return the latest date from a list of columns
and so I decided to use GREATEST()
.
What I didn't realise was that if one of the
arguments is NULL
then the function returns NULL
.
If I'd read the documentation in full I'd have known! In many cases it can take just a minute or less to scan the documentation and it will save you the headache of having to work out why something isn't working the way you expected:
-- If I'd read the documentation further I'd also have realised that my solution
--to the NULL problem with GREATEST()...
SELECT COALESCE(GREATEST(signup_date, consumption_date), signup_date, consumption_date);
-- ... could have been solved with the following function:
SELECT GREATEST_IGNORE_NULLS(signup_date, consumption_date);
There's almost nothing worse than not being able to find a query you need to re-run/refer back to.
Use a descriptive name when saving your queries so you can easily find what you're looking for.
I usually will write the subject of the query, the month the query was ran and the name of the requester (if they exist).
For example: Lapsed users analysis - 2023-09-01 - Olivia Roberts