bendavid/firmware-mod-kit

Issues

• FMK won't extract zip compressed cramfs images?

  #148 opened 9 years ago by GoogleCodeExporter
  0

• after edit ddwrt-gui's asp file,install error

  #145 opened 9 years ago by GoogleCodeExporter
  0

• Does FMK work on dd-wrt firmware for buffalo wzr-600dhp

  #146 opened 9 years ago by GoogleCodeExporter
  0

• CRC update failed - Netis WR2419 firmware

  #147 opened 9 years ago by GoogleCodeExporter
  0

• Firmware Image Generated Different from Original when nothing changed for its extracted contents

  #142 opened 9 years ago by GoogleCodeExporter
  0

• Failed to create new file system

  #143 opened 9 years ago by GoogleCodeExporter
  0

• Can not extract Huawei HG655b-B025 firmware

  #144 opened 9 years ago by GoogleCodeExporter
  0

• Cannot extract firmware

  #140 opened 9 years ago by GoogleCodeExporter
  0

• Issue in extracting squashfs filesystem

  #141 opened 9 years ago by GoogleCodeExporter
  0

• Image fault when builidng Tomato for RT-AC68U

  #139 opened 9 years ago by GoogleCodeExporter
  3

• Extracted firmware and then tried to rebuild it and it became larger, probably because it didnt use lzma for recompress.

  #138 opened 9 years ago by GoogleCodeExporter
  1

• Can't unpack Zyxel NWA-3100 firmware

  #135 opened 9 years ago by GoogleCodeExporter
  1

• Wrong build

  #136 opened 9 years ago by GoogleCodeExporter
  0

• uncramfs-lzma stops after successfully decoding the first block

  #137 opened 9 years ago by GoogleCodeExporter
  0

• CramFS extraction failed due to missing cleaning up

  #134 opened 9 years ago by GoogleCodeExporter
  0

• new binwalk

  #133 opened 9 years ago by GoogleCodeExporter
  1

• Can this firmeware be extracted?

  #131 opened 9 years ago by GoogleCodeExporter
  2

• jffs2 big endian problem

  #132 opened 9 years ago by GoogleCodeExporter
  0

• wdr3600v1 firmware cannot be unpacked

  #128 opened 9 years ago by GoogleCodeExporter
  1

• Extracting 0 bytes of header image at offset 0

  #129 opened 9 years ago by GoogleCodeExporter
  1

• Failure building image.

  #130 opened 9 years ago by GoogleCodeExporter
  0

• CRC update failed. Firmware header not supported; firmware checksums may be incorrect.

  #126 opened 9 years ago by GoogleCodeExporter
  0

• Firmware header not supported; firmware checksums may be incorrect.

  #127 opened 9 years ago by GoogleCodeExporter
  0

• Failed to compile on gentoo

  #123 opened 9 years ago by GoogleCodeExporter
  1

• CRC update failed

  #124 opened 9 years ago by GoogleCodeExporter
  0

• Added support for TP-Link v2 header firmware (TD-W8968v1)

  #125 opened 9 years ago by GoogleCodeExporter
  2

• unsquashfs segfault on 64bit machines

  #121 opened 9 years ago by GoogleCodeExporter
  3

• Issue in building firmware

  #122 opened 9 years ago by GoogleCodeExporter
  0

• Compile error on gentoo x64 (glibc2.17)

  #120 opened 9 years ago by GoogleCodeExporter
  4

• Can't extract cpio archive from Securifi firmware.

  #119 opened 9 years ago by GoogleCodeExporter
  4

• Unsquashfs_all.sh fails to extract

  #117 opened 9 years ago by GoogleCodeExporter
  4

• Firmware support for linksys EA6700 firmware

  #118 opened 9 years ago by GoogleCodeExporter
  1

• Fail to flash OpenWrt Attitude Adjustment built with FMK

  #116 opened 9 years ago by GoogleCodeExporter
  0

• FMK image not loading on D-Link DIR-868L

  #113 opened 9 years ago by GoogleCodeExporter
  2

• Ubiquiti M5 devices firmware rebuild

  #114 opened 9 years ago by GoogleCodeExporter
  0

• JFFS2 support

  #115 opened 9 years ago by GoogleCodeExporter
  2

• crcalc.c does not update all the trx information

  #111 opened 9 years ago by GoogleCodeExporter
  1

• rebuild firmware is too large

  #112 opened 9 years ago by GoogleCodeExporter
  2

• -nopad switch causes checksum failure for trx image

  #110 opened 9 years ago by GoogleCodeExporter
  2

• CRC update failed

  #109 opened 9 years ago by GoogleCodeExporter
  8

• Can't rebuild the changed firmware

  #108 opened 9 years ago by GoogleCodeExporter
  4

• footer.img checksum

  #106 opened 9 years ago by GoogleCodeExporter
  1

• Add support for Billion / Telewell devices

  #107 opened 9 years ago by GoogleCodeExporter
  0

• Unknown Squashfs compression

  #105 opened 9 years ago by GoogleCodeExporter
  6

• Unchanged firmware output size doesn't match original size and bricks device

  #104 opened 9 years ago by GoogleCodeExporter
  10

• Firmwares larger than original due to squashfs-lzma not being detected by Binwalk

  #103 opened 9 years ago by GoogleCodeExporter
  6

• GUI Rebuild results in blank page

  #102 opened 9 years ago by GoogleCodeExporter
  7

• better include common.inc

  #101 opened 9 years ago by GoogleCodeExporter
  1

• GUI-Restore is not working -> "restore: Is a directory"

  #100 opened 9 years ago by GoogleCodeExporter
  14

• rebuild firmware

  #99 opened 9 years ago by GoogleCodeExporter
  9