QTester104 Copyright © 2010-2019 Ricardo L. Olsen. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. This software implements an IEC 60870-5-104 protocol tester. IEC 60870-5-104 is a commonly used protocol for data acquisition and control of power substations. Directories: src - multiplatform qt sources, compile with QT 5.13.1 or later on any supported platform. bin - win32 binaries built with QT 5.13.1. conf - configuration file Can be used to poll substation data and issuing commands. The base protocol classes are pure C++ without any platform or non-standard library dependencies, can be used to develop software with other compiler/library/sdk. The software is part of a full substation HMI project (OSHMI - Open Substation HMI), it functions as a protocol module for the HMI, but can be used as a standalone protocol tester. It's possible to send a General Interrogation ([GI] button) and log messages on the screen. At the right panel is shown a table with the following data columns: Protocol [Address] | Last acquired [Value] | ASDU [Type] | [Cause] of transmission | Quality [Flags] | [Count] of transmissions. The protocol quality flags are: on / off / tra (double point transition) / ind (double point indefinite) / bl (blocked) / iv (invalid) / nt (not topical) / sb (substituted) / ov (overflow) / t (reg.step transition). An optional configuration file can be used to store basic parameters, in the form of a INI file (qtester104.ini): [BDTR] ; 0 (default): Normal operation mode ; 1: Force to be primary when in redundant mode ; FORCE_PRIMARY=0 [IEC104] PRIMARY_ADDRESS=1 ; link address of the primary station (computer) [RTU1] ; communicates with only one RTU in this version SECONDARY_ADDRESS=2 ; protocol link address of the RTU IP_ADDRESS=192.168.1.1 ; IP address of the RTU ; IP_ADDRESS_BACKUP=192.168.1.2 ; IP address of the BACKUP RTU ALLOW_COMMANDS=1 ; 1=allow sending commands, 0=don't permit commands ; PORT=2404 ; Protocol port (default=2404) ; GI_PERIOD = 330 ; time period in seconds for general interrogations (default=330s) Thank you for the interest, please fell free to comment and contribute. * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR * THE USE OR OTHER DEALINGS IN THE SOFTWARE.