This repository brings you 3 helper programs for the installation of NextionDriver when you do not want to do it by hand:
- a program to install NextionDriver
- a program to convert an existing MMDVMHost configuration file for using NextionDriver (this is called by the installer program)
- a program to check the installation
This is the installer program for NextionDriver.
I (and others) have tested it on some hotspots, but there are always much more situations and combinations than the ones we tested :-) (special thanks to Rob PD0DIB for his feedback)
The installer runs the configuration convertor program for automatically converting the MMDVM.ini file to incorporate NextionDriver.
You could just run it (NextionDriver_ConvertConfig) if you installed NextionDriver by hand, but it also will be called when you run the installer !
When you have installed the NextionDriver, this programs tries to check
the MMDVMHost and NextionDriver configuration.
The program then gives a lot of information about the installation
of the NextionDriver and if it seems to be OK or not.
log in to your Pi-Star with SSH
- use PuTTY
- or go to your dashboard -> configuration -> expert -> SSH access (http://pi-star.local/admin/expert/ssh_access.php)
go to the /tmp directory
cd /tmp
get the software
git clone https://github.com/on7lds/NextionDriverInstaller.git
go !
sudo NextionDriverInstaller/install.sh
log in to your Pi-Star with SSH
- use PuTTY
- or go to your dashboard -> configuration -> expert -> SSH access (http://pi-star.local/admin/expert/ssh_access.php)
go to the /tmp directory
cd /tmp
get the software
git clone https://github.com/on7lds/NextionDriverInstaller.git
NOTE: if you get an error that the destionation path exists, you already downloaded the software. The just ho to the next step.
go !
sudo NextionDriverInstaller/check_installation.sh