This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
- If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- You may not use the material for commercial purposes.
- You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
A1200 4xKickstart Switcher PCB is a design by MerlinKV
This project was made for the retro community and not for commercial purposes. So only retro hardware forums and individual people can build this project.
ITS SALE ON EBAY OR OTHER AUCTION SITES IS PROHIBITED
I take no responsibiltiy for any damage to any equipment that results from the use of this board. USE AT YOUR OWN RISK!
https://www.winuaespanol.com/phpbb3/viewtopic.php?f=32&t=1168
A Kickstart switcher for the A1200D or A1200T allowing to use up to 4 Kickstart's of 512Kb or 1MB.
Based on two M27C160 EPROM's but also MX29F1615 EEPROM's can be used.