bfoz/Ester

Issues

• Add hinges for the lid

  #18 opened 10 years ago by bfoz
  0

• Model the controller board

  #17 opened 10 years ago by bfoz
  0

• Add endstops

  #9 opened 10 years ago by bfoz
  1

• Fix the top deck orientation mark

  #10 opened 10 years ago by bfoz
  1

• Add a full enclosure

  #2 opened 10 years ago by bfoz
  0

• Switch to trapezoidal leadscrews

  #1 opened 10 years ago by bfoz
  0

• Move the x-motor to the frame

  #6 opened 10 years ago by bfoz
  0

• Use flanged bearings, instead of sprockets, for idler pulleys?

  #16 opened 10 years ago by bfoz
  0

• Model the extrusion nuts

  #15 opened 10 years ago by bfoz
  0

• Model all the belts

  #14 opened 10 years ago by bfoz
  0

• [Design] Considerations

  #13 opened 10 years ago by zh1609
  1

• Extend the chamber panels to the bottom panel

  #8 opened 10 years ago by bfoz
  0

• Use thinner acrylic for the chamber side panels

  #7 opened 10 years ago by bfoz
  1

• [Compilation] Sketchup

  #12 opened 10 years ago by zh1609
  25

• Add ruler marks to the top deck along the piston cutout

  #11 opened 10 years ago by bfoz
  0

• Fix the y-axis pulley mounting

  #5 opened 10 years ago by bfoz
  0

• Add drag chains for the wires

  #4 opened 10 years ago by bfoz
  0

• Generate a BOM

  #3 opened 10 years ago by bfoz
  0