AquaOxyLog
Simple logger software for Pyroscience Firesting
For use with AquaResp.
Features
Retrieves and saves OXYGEN (as % AIR SAT) data from Pyroscience Firesting fiber optic sensors.
Creates one (1) data file per session. Logs sensors, up to 4, at approximately 1 sample per second.
Updates a file with the latest measurement (For external access, e.g. Aquaresp or similar)
You can request features if you think that something would be nice to have.
Getting started
Prerequisites
- Python installed (if for use with Aquaresp, see Aquaresp repository
- pyserial installed. > Open CMD (Windows button, then type "cmd") > write "py -m pip install pyserial", press ENTER
Preparation of the oxygen sensor
The logger requires that the oxygen meter is set up and calibrated before use.
-
Calibrate and setup the oxygen logger via the PyroWorkbench provided by the manufacturer. See PyroScience
-
Close PyroScience Software. This is necessary as only 1 software connection to the hardware is possible.
Start Aqua OxyLog
-
Create a settings file: Find the index.html file in /settinggui file out and press download. Place the "downloaded" file in the /lib folder, replace the existing one.
-
Run Logger.bat
-
Check file at Location Datafile. See live data using the data.html in /lib/liveplot/
-
End logging by closing the CMD window.
A more elaborate quick guide is available here as PDF PDF GUIDE