bigtreetech/BIGTREETECH-OCTOPUS-Pro

I2C timeout klipper

Pepeuch opened this issue · 1 comments

hello, for several days I have been trying to make a BME280 sensor work on the I2C port, however I have a timeout error on this one, here is my current configuration which I think is correct.

[temperature_sensor Chamber]
sensor_type: BME280
i2c_address:119# Default is 118 (0x76). Some BME280 sensors have an address of 119# (0x77).
i2c_mcu: mcu
i2c_bus:i2c1
i2c_speed:100000# See the "common I2C settings" section for a description of the above parameters.
min_temp: 0# See the "extruder" section for the definition of the above
max_temp: 80
gcode_id: AMB# See the "heater_generic" section for the definition of this

i resolve my problem, my config fot this:
[temperature_sensor Chamber]
sensor_type: BME280
i2c_address:119.
i2c_mcu: mcu
i2c_bus:i2c1a
min_temp: 0
gcode_id: AMB