bigtreetech/BIGTREETECH-OCTOPUS-Pro

Issues

• Wrong Motor in Pinout Changes Table in Readme

  #33 opened a year ago by SuperDodge
  1

• serial comm issue H723ze

  #51 opened 11 days ago by shortcircuitaz
  1

• Octopus pro 723

  #48 opened a month ago by jimgineer
  3

• Cant use MAX31865/PT1000 while using EXP1 and/or EXP2

  #44 opened 9 months ago by Urminme
  1

• 12V rail - wrong current rating in manual?

  #50 opened 3 months ago by NyxCode
  0

• BTT Tmc 5160 1.2 and octopus pro giving error "TMC 'stepper_y1' reports error: GSTAT: 00000004 uv_cp=1(Undervoltage!")

  #40 opened a year ago by Shamoon78
  3

• Octopus Pro & MicroProbe V2.0

  #41 opened a year ago by motoyasu-atsumi
  15

• PA0 is not the driver 3 EN pin!

  #49 opened 5 months ago by Erosion139
  1

• Bootloader issue with 446

  #47 opened 8 months ago by insanemal
  4

• no spi communication for drivers - missing PA6

  #23 opened 9 months ago by SaPu84
  59

• Marlin Octopus Pro v1.1 (H723ZE) no definition

  #36 opened a year ago by vfbank
  7

• New firmware development

  #46 opened 8 months ago by L1ikhith
  0

• OCTOPUS PRO V1.1 (H723)

  #45 opened 9 months ago by FREAKASAS
  1

• HE0 (PA0) and HE2 (PB0) does not work

  #43 opened a year ago by oleksii-suprun
  2

• The SPI bus cannot communicate with the “TMC5160 PRO” driver.

  #25 opened 2 years ago by mekaireb
  8

• Errant string in USB descriptor breaks dfu-util

  #42 opened a year ago by garethky
  0

• Octopus Pro 1.1 (STM32H723) and TMC5160 Pro V1.1 Cannot Communicate

  #32 opened a year ago by rexsham
  2

• using vscode to flash firmware does not work

  #12 opened 3 years ago by Majestix1970
  2

• Canbus connection on USB-C port to U2C module, how to do that?

  #38 opened a year ago by Hoeby
  0

• Octopus Pro H729 DIAG pins

  #37 opened a year ago by PerLangkjaer
  4

• Can Bus Connector type does not match BigTreeTech Manual

  #35 opened a year ago by cromine11
  0

• F420 V1.0 hotend themperatur sensor via max31856

  #34 opened a year ago by Kahrisan
  0

• 无法写入tmc spi“stepper_x”寄存器GLOBALSCALER

  #26 opened 2 years ago by asdfsgasdfa
  6

• TMC5160proV1.1 & octopus Pro V1.0 F429 (Marlin SPI) 48V -> no communikation, what to do?

  #30 opened 2 years ago by jessepietila
  2

• Stepper Driver SPI (MAX31865 module) does not work when LCD SD is connected on EXP2

  #31 opened 2 years ago by ansonl
  2

• USB-C power and serial for Raspberry Pi 4

  #27 opened 2 years ago by Kaelum
  7

• USB wifi adapter

  #29 opened 2 years ago by nickisghosty
  1

• LCD SD Card and USB Flash drive Marlin firmware

  #28 opened 2 years ago by yzheka
  0

• ez driver connector diag pin position

  #20 opened 2 years ago by v6cl
  2

• PE11/GND reversed in Octopus Pro color PIN diagram

  #17 opened 2 years ago by ph1ltep
  3

• WIFI connector - must add warning

  #24 opened 2 years ago by DaLiV
  0

• Onboard Speaker - How that can be used ?

  #22 opened 2 years ago by DaLiV
  1

• Driver 4 (Motor_3) E0 Works like other Z2

  #21 opened 2 years ago by JORGENIGMA
  3

• Thermistor inputs. what if hotends are 300C+

  #19 opened 2 years ago by DaLiV
  0

• Redacted

  #18 opened 2 years ago by stephen-opet
  0

• Unable to connect to board

  #9 opened 3 years ago by stewcop23
  1

• ntc100k setup

  #16 opened 2 years ago by mystone51
  2

• no printer attached !!!!

  #15 opened 2 years ago by Akds4877
  0

• Speaker pin?

  #14 opened 3 years ago by jvandervyver
  2

• 2nd Tactile button on v1.0.1

  #13 opened 3 years ago by Budavaril
  2

• No power on but LED's light up by moving X stepper

  #11 opened 3 years ago by TheRephaim
  0

• How to connect 2nd LED? Which port has alternative 5V data

  #10 opened 3 years ago by renekar
  1

• wiring and coding mods for external drivers TB6560

  #8 opened 3 years ago by luca920
  0

• Octopus PRO dual Y axis

  #7 opened 3 years ago by luca920
  5

• I2C timeout klipper

  #6 opened 3 years ago by Pepeuch
  1

• MAX31865 temperature issue

  #5 opened 3 years ago by Afterschnitzel
  0

• Octopus Pro F429 DFU boot

  #3 opened 3 years ago by r0bb10
  0

• Wrong FAN4 Pin in 'BIGTREETECH Octopus Pro - PIN.pdf'

  #1 opened 3 years ago by dominovox
  2

• MAX31865 Reference Resistor

  #2 opened 3 years ago by UrufuShinjiro
  1