BTT-HDMI7 resolution not correct
Closed this issue · 2 comments
I have attached a BTT-HDMI7 via HDMI to the board. The board runs from SD Card the current image (CB2_Debian11_Klipper_kernel4.19_20240422). As described in the user manual i have configured HDMI display.
Linux starts and i can see boot messages on the screen and later KlipperScreen. But the resolution is not correct.
It seems that Linux uses a resolution of 1280x720 but the display has only 1024x600.
How can i set the correct resolution?
Kernel Message:
rockchip-vop2 fe040000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1280x720p0, type: 11 for vp0
I have attached a BTT-HDMI7 via HDMI to the board. The board runs from SD Card the current image (CB2_Debian11_Klipper_kernel4.19_20240422). As described in the user manual i have configured HDMI display.
Linux starts and i can see boot messages on the screen and later KlipperScreen. But the resolution is not correct.
It seems that Linux uses a resolution of 1280x720 but the display has only 1024x600.
How can i set the correct resolution?
Kernel Message: rockchip-vop2 fe040000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1280x720p0, type: 11 for vp0
Try flashing the image again
The problem is with the V1.0.4 image solved. The display just works.
Thank you.