Issues
- 12
IMX219 found, but no stream
#22 opened by Aergernis - 4
- 1
UART PI2
#33 opened by Brenddpaula - 4
Linux kernel 6.6 for cb2 does not work
#12 opened by TheFeralEngineer - 2
How to use DS18B20 on CB2
#25 opened by oMTEo - 2
LAN LED stay on even without Cat wire installed
#32 opened by JD13xs - 0
Camera usb takes a long time to take a picture
#30 opened by jfml2020 - 6
Moonraker Telegram Bot can't install Img 1.0.5
#27 opened by iamLellep - 22
eth0 servely drops packets
#21 opened by ChesterHachirokuJamie - 1
- 7
- 8
- 6
klipperScreen not boot on TFT35 Img 1.0.5
#28 opened by iamLellep - 9
IMX219 Camera not detected
#23 opened by DriHut - 1
- 10
CSI/DSI attachments too dark
#10 opened by igl-x2 - 2
- 10
Raspicam v1.3 + crownest
#19 opened by mojamuto - 3
Screen Raspberry 7 inch PI2
#13 opened by jeje444 - 11
login error
#11 opened by timido - 8
gpio pinout issue
#16 opened by combass - 2
BTT-HDMI7 resolution not correct
#3 opened by Garag - 6
Random connection problem with EBB
#18 opened by Sprocyon - 13
No devices
#17 opened by EVPilot - 11
Bootvorgang teilweise garnicht möglich
#15 opened by Hentrich7274 - 2
BTT-Pi2 Klipper runtime warning
#2 opened by EightFinger - 3
汉字乱码,触控失效,联网不稳定,klipper重启后加载不了。
#5 opened by cavalligao - 34
- 34
User Manual is for Pi2
#1 opened by MackinsVII - 2
- 4
CB2 image dont boot
#8 opened by OstroMa - 0
STEP for the Pi2 has an incorrect post for the M.2 mount. It's 8mm, the board have 2.5mm
#4 opened by SergeDubovsky