Can't update MCU
Closed this issue · 2 comments
Deapper commented
I followed the instructions for flashing the mcu with little success;
First I compiled the firmware with the 'make' command after make menuconfig settings as sighted in the manual.
cd ~/klipper/
make menuconfig
Changed the klipper.bin to firmware.bin and loaded onto a sdcard root.
Placed sdcard in MCU slot
Power off/on even tried the reset swicth.
After checking the sdcard either time I can not see firmware.cur only firmware.bin remains
Deapper commented
Is anyone else able to update MCU by sdcard?
Deapper commented
Not sure why I can't flash by sdcard... Used DFU mode. To get into DFU mode press and hold button on Manta board while power on.. Then in ssh straight after 'make' instruction in manual I pasted
make flash FLASH_DEVICE=0483:df11