bigtreetech/SKR-3

Issues

• SKR-3 EZ Moves an inch and then HALTS

  #95 opened 2 months ago by inspectionsbybob
  1

• Different processor being used on newer boards.

  #94 opened 2 months ago by NAPCAL
  1

• SKR 3 EZ + EZ5160 extruder not working

  #93 opened 2 months ago by WECHET
  0

• SKR3 EZ Sensorless Homing not working

  #64 opened 2 years ago by asdino2
  23

• SKR3 EZ with ESP3D not flashing new firmware for wifi module

  #60 opened 2 years ago by asdino2
  1

• Analog input pins available?

  #71 opened 2 years ago by Voxel3DPrinting
  1

• Filament runout sensor

  #92 opened 4 months ago by eerthanaK
  0

• SKR Mini E3 v.0 and TFT35 E3 V3.0.1 - no printer attached

  #91 opened 4 months ago by dbyy
  0

• Provide support/documentation for STM32H723 variant

  #48 opened 2 years ago by infowolfe
  20

• BTT SKR 3 with Fysetc TMC2209 V3.0 connection error all Low

  #90 opened 9 months ago by SpankyDevil
  1

• Current capacity of RGB LED port on SKR 3 board

  #89 opened 9 months ago by julio100
  0

• problem TMC UART SKR 3 flsun v400

  #88 opened 9 months ago by Skouzzz
  0

• Bootloader SKR-3 via STM32H723

  #87 opened a year ago by Nedacast
  2

• Hardware (SKR 3 EZ)/BIGTREETECH SKR 3 EZ V1.0 3D.pdf is blank

  #85 opened a year ago by jimmyeao
  2

• USB Start Failed

  #86 opened a year ago by jzagyi13
  0

• SKR 3 EZ H723VGT6 - No USB connection on Marlin 2.1.2.1 and bugfix 2.1.x

  #82 opened a year ago by Qnter
  1

• No Printer Attached Issue

  #57 opened 2 years ago by Donovan4097
  50

• btt tft24-v1.1 and skr 3 ez not connecting

  #84 opened a year ago by giri456
  0

• Wrong RSENSE values for TMC2130 in example Config

  #83 opened a year ago by ellensp
  0

• SKR 3 ez no serial connection to computer and to tft screen

  #53 opened 2 years ago by dutchronnie
  4

• SKR3 EZ - No image on CR-10 Stock Display

  #81 opened a year ago by RAIDLime
  1

• [BUG] (error in function 'void flashFirmware(int16_t)' --> error: 'hal' was not declared in this scope)

  #80 opened a year ago by MrRadicalsheep
  0

• SKR 3 EZ HE0 & HE1 jumpers

  #77 opened 2 years ago by FwedFwed
  2

• max overvoltage

  #79 opened 2 years ago by ruskadoosh
  0

• BTT SKR EZ 3 firmware load/update via USB (?)

  #78 opened 2 years ago by jekin17
  0

• What are the MFAN connectors for?

  #75 opened 2 years ago by BahamutWolf
  3

• Documentation vs real reading hardware SKR 3 EZ

  #49 opened 2 years ago by livius2
  1

• unknown command m420.. When trying to home.

  #55 opened 2 years ago by pnelson29
  8

• CPAP fan and PWM 5V output pin

  #76 opened 2 years ago by ruskadoosh
  0

• REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER not working with EZ2209 drivers

  #74 opened 2 years ago by amaury10
  2

• Ps-on not pulling down to 0 volts klipper

  #73 opened 2 years ago by hexitex
  0

• SKR3 + Mini 12864 V2.0 Marlin config

  #70 opened 2 years ago by dB-0103
  2

• Files inside flash drives and sd cards are not recognized

  #72 opened 2 years ago by bchianca
  0

• PDF is blank

  #61 opened 2 years ago by wagnerism
  1

• Configuration of drivers on SKR 3 EZ with five EZ5160 Pro drivers for separate Z-axis motors

  #66 opened 2 years ago by BahamutWolf
  4

• Has anyone had issues with a Reprapdiscount full graphic LCD

  #50 opened 2 years ago by HTMLdu
  12

• can i have bootloader file for skr3 ez?

  #69 opened 2 years ago by Arztz
  1

• Unable to write tmc spi 'stepper_y' register GLOBALSCALER

  #68 opened 2 years ago by Mubbler
  1

• Skr 3 ez

  #67 opened 2 years ago by corylong019
  0

• SKR 3 EZ Cannot mount sd card to computer

  #65 opened 2 years ago by fals3illusion
  0

• Raspberry no longer sees the SKR board

  #63 opened 2 years ago by MagicPiciu
  1

• SKR fails USB connect after sometime

  #62 opened 2 years ago by yasaslive
  7

• SKR-3EZ CAN BUS HAS NO POWER

  #59 opened 2 years ago by kgalilio
  0

• SKR-3EZ TMC2209 AND BIQU H2 STEEPS WRONG

  #58 opened 2 years ago by Albitxuri
  2

• No Printer Attached error on SKR3 with TFT35 E3 V3

  #56 opened 2 years ago by chopperwolf
  1

• SKR 3 EZ Second Z not working

  #51 opened 2 years ago by Tomzrk
  6

• Z axis and Extruder not working

  #54 opened 2 years ago by GeniusPsychopat
  5

• BTT SKR 3EZ - EZ2209 - ALL HIGH - TMC CONNECTION ERROR

  #52 opened 2 years ago by Mydaiel
  10

• SKR 3 EZ and BL Touch

  #47 opened 2 years ago by BarnsleyBill
  1

• SKR Mini E3 V3 and TFT35 V3.0.1 - no printer attached

  #46 opened 2 years ago by boudlergit
  1