bigtreetech/smart-filament-detection-module

Issues

• BTT SFS 2.0 - many wrong errors with the motion sensor --> many false positives

  #68 opened 25 days ago by Sonnenwerk
  0

• Incorrect detection length in v2 user manual

  #67 opened a month ago by vovodroid
  0

• BTT 2.0 with Creality 4.2.7 system board

  #43 opened a year ago by TacII
  39

• The red LED is always on on the sensor

  #66 opened 2 months ago by MrKuskov
  0

• Compiling marlin using Robin Nano v3.1 and SFS v2.0 failed - ADVANCED_PAUSE_FEATURE issue

  #65 opened 2 months ago by Cysign
  0

• Creality K1? Can the sensor be used if only filament runout pins are available?

  #47 opened a year ago by Horgul123
  39

• BTT SFS 2.0 on rooted K1 Max in place of original sensor? Keeps throwing an error.

  #60 opened 5 months ago by cmcfalls2
  1

• BTT SFS 2.0 with Ender 3 S1 Pro and STM32F401 Board do not working

  #64 opened 4 months ago by mac0815
  0

• Switch Sensor not responding to filament

  #63 opened 4 months ago by deadpickle
  0

• BTT Smart Sensor v2 Constantly triggering Switch Sensor

  #55 opened 4 months ago by deadpickle
  2

• SFS V2.0 with SKR Mini E3 V3

  #36 opened a year ago by Devo842
  26

• SFS v2.0 + SKR 1.4 Turbo + TFT35 E3 V3.0 How do I get work together if I print only from an SD-card on TFT35?

  #62 opened 5 months ago by nen777w
  0

• Problems with Ocotpus pro solved

  #61 opened 5 months ago by miso2176
  0

• SKR Pico Connection?

  #40 opened a year ago by dgpmaluco
  19

• filament_motion_sensor on Flsun V400 / MKS Nano V2.0

  #59 opened 5 months ago by The-Padi
  0

• SFS 2.0: filament path, a design flaw - filament hits walls near output holes

  #46 opened a year ago by arekm
  5

• SKR min E3 V3 and SFS 2.0 erroneous filament runout at start of print

  #58 opened 7 months ago by tgreening
  0

• Example for use with BTT Kraken MCU

  #57 opened 8 months ago by altraWeb
  0

• Skr mini e3 v3 used with BTT ups 24v and a BTT SFS v2

  #56 opened 9 months ago by By-Tor2112
  0

• How to install sfs 2.0 on a spider 2.3

  #48 opened a year ago by llambion72
  4

• Incorrect settings for Reprap Firmware in manual

  #54 opened 10 months ago by angrycannibal
  0

• Reset pause state with Klipper?

  #53 opened a year ago by treaves
  0

• Many false positive errors

  #52 opened a year ago by Horgul123
  1

• SFS V2 with relay V1.2 and SKR mini e3 V2

  #51 opened a year ago by hima4all
  0

• Btt sensor v2 made sv06 motherboard defective ?

  #50 opened a year ago by TommyStrobbe
  0

• How to install sfs 2.0 on Neptune 4?

  #49 opened a year ago by 638Alex638
  0

• Install SFS v2 on Artillery Sidewinder X2?

  #42 opened a year ago by Ltek
  4

• Fillament Runout Error - skr mini e3 v2

  #26 opened 3 years ago by aldaw
  1

• Broken CAD model for SFS 2.0

  #45 opened a year ago by arekm
  0

• How to test SFS v2 without printing... just moving the filament in/out by hand?

  #44 opened a year ago by Ltek
  1

• Btt v2.0 on sovol sv07+

  #41 opened a year ago by GTreaper
  1

• Configuration with sv06 with klipper

  #35 opened 2 years ago by foocross
  2

• cr4ns200141c13 on ender 5 s1 config klipper for sfs v2.0

  #38 opened a year ago by eduardloskutov
  1

• What is the best way to test a 2.0 installation?

  #39 opened a year ago by alfista2600
  0

• SKR mini 1.3 with TFT display

  #37 opened a year ago by Blisk
  0

• BTT SKR E3 V3 board and Smart Filament Sensor always triggering as soon as a print is started?

  #28 opened 2 years ago by gleep52
  4

• manta e3 board

  #34 opened 2 years ago by richsac64
  0

• Detection Sensor not working on SKR mini e3 Board

  #33 opened 2 years ago by Blisk
  1

• BTT SKR 1.4 turbo with BTT filament detector not working

  #32 opened 2 years ago by cmtebrunop
  0

• Smart Filament Sensor not Working on SKR 3 EZ Board on E0DET

  #31 opened 2 years ago by matthiassteiner80
  0

• What Connect type for the 4 pin Sensor end?

  #19 opened 3 years ago by HALLAMNET
  4

• FR: Add hall effect filament width messurement to the smart filament detection module

  #30 opened 2 years ago by Markus-1984
  1

• Smart filament detection not working on tft 35 v3.0

  #29 opened 2 years ago by LaddiusMaximus
  0

• under extrussion and stringing

  #27 opened 3 years ago by TOXICNITRO
  0

• Octopus Pin + Klipper settings?

  #25 opened 3 years ago by JohnGalt1717
  0

• How can you configure this for Duet3D boards

  #22 opened 3 years ago by ToonMeynen
  1

• Bigtreetech Smart Filament Sensor - Creality Ender 3 Pro & SKR-mini-E3-V2.0

  #24 opened 3 years ago by rto54
  0

• Bigtreetech Smart Filament Sensor SFS V1.0 Creality CR-6 & Bigtreetech SKR CR6 V1 Board

  #23 opened 3 years ago by michaelwa01
  2

• Does this work with the SKR Mini E3 v1.2?

  #20 opened 3 years ago by evilC
  0

• BTT Smart sensor + capacitor ?

  #18 opened 4 years ago by Grex3D
  1