Microsoft AD As Built Report

Microsoft AD As Built Report is a PowerShell module which works in conjunction with AsBuiltReport.Core.

AsBuiltReport is an open-sourced community project which utilises PowerShell to produce as-built documentation in multiple document formats for multiple vendors and technologies.

Please refer to the AsBuiltReport website for more detailed information about this project.

📚 Sample Reports

Sample Report - Custom Style 1

Sample Microsoft AD As Built report HTML file: Sample Microsoft AD As-Built Report.html

Sample Microsoft AD As Built report PDF file: Sample Microsoft AD As Built Report.pdf

🔰 Getting Started

Below are the instructions on how to install, configure and generate a Microsoft AD As Built report.

💾 Supported Versions

The Microsoft AD As Built Report supports the following Active Directory versions;

2012, 2016, 2019 & 2022

PowerShell

This report is compatible with the following PowerShell versions;

Windows PowerShell 5.1	PowerShell 7
✅	❌

🔧 System Requirements

PowerShell 5.1, and the following PowerShell modules are required for generating a Microsoft AD As Built report.

Linux & macOS

This report does not support Linux or Mac due to the fact that the ActiveDirectory/GroupPolicy modules are dependent on the .NET Framework. Until Microsoft migrates these modules to native PowerShell Core, only PowerShell >= (5.x, 7) will be supported on Windows.

🔐 Required Privileges

A Microsoft AD As Built Report can be generated with Active Directory Enterprise Forest level privileges. Since this report relies extensively on the WinRM component, you should make sure that it is enabled and configured. Reference

Due to a limitation of the WinRM component, a domain-joined machine is needed, also it is required to use the FQDN of the DC instead of its IP address. Reference

📦 Module Installation

PowerShell v5.x running on a Domain Controller server

Install-Module -Name PSPKI
Install-Module -Name AsBuiltReport.Microsoft.AD
Install-WindowsFeature -Name RSAT-AD-PowerShell
Install-WindowsFeature -Name RSAT-ADCS,RSAT-ADCS-mgmt
Install-WindowsFeature -Name RSAT-DNS-Server
Install-WindowsFeature -Name GPMC

PowerShell v5.x running on Windows 10 client computer

Install-Module -Name PSPKI
Install-Module -Name AsBuiltReport.Microsoft.AD
Add-WindowsCapability -online -Name 'Rsat.ActiveDirectory.DS-LDS.Tools~~~~0.0.1.0'
Add-WindowsCapability -Online -Name 'Rsat.CertificateServices.Tools~~~~0.0.1.0'
Add-WindowsCapability -online -Name 'Rsat.GroupPolicy.Management.Tools~~~~0.0.1.0'
Add-WindowsCapability –online –Name 'Rsat.Dns.Tools~~~~0.0.1.0'

GitHub

If you are unable to use the PowerShell Gallery, you can still install the module manually. Ensure you repeat the following steps for the system requirements also.

Download the code package / latest release zip from GitHub
Extract the zip file
Copy the folder AsBuiltReport.Microsoft.AD to a path that is set in $env:PSModulePath.

Open a PowerShell terminal window and unblock the downloaded files with

$path = (Get-Module -Name AsBuiltReport.Microsoft.AD -ListAvailable).ModuleBase; Unblock-File -Path $path\*.psd1; Unblock-File -Path $path\Src\Public\*.ps1; Unblock-File -Path $path\Src\Private\*.ps1

Close and reopen the PowerShell terminal window.

Note: You are not limited to installing the module to those example paths, you can add a new entry to the environment variable PSModulePath if you want to use another path.

✏️ Configuration

The Microsoft AD As Built Report utilises a JSON file to allow configuration of report information, options, detail and healthchecks.

A Microsoft AD report configuration file can be generated by executing the following command;

New-AsBuiltReportConfig -Report Microsoft.AD -FolderPath <User specified folder> -Filename <Optional>

Executing this command will copy the default Microsoft AD report JSON configuration to a user specified folder.

All report settings can then be configured via the JSON file.

The following provides information of how to configure each schema within the report's JSON file.

Report

The Report schema provides configuration of the Microsoft AD report information.

Sub-Schema	Setting	Default	Description
Name	User defined	Microsoft AD As Built Report	The name of the As Built Report
Version	User defined	1.0	The report version
Status	User defined	Released	The report release status
ShowCoverPageImage	true / false	true	Toggle to enable/disable the display of the cover page image
ShowTableOfContents	true / false	true	Toggle to enable/disable table of contents
ShowHeaderFooter	true / false	true	Toggle to enable/disable document headers & footers
ShowTableCaptions	true / false	true	Toggle to enable/disable table captions/numbering

Options

The Options schema allows certain options within the report to be toggled on or off.

Sub-Schema	Setting	Default	Description
ShowDefinitionInfo	true/false	false	Toggle to enable/disable Microsoft AD term explanations
PSDefaultAuthentication	Negotiate/Kerberos	Negotiate	Allow to set the value of the PSRemoting authentication method. For Workgroup authentication Negotiate value is required.
Exclude.Domains	Array List	Empty	Allow to filter on AD Domain FQDN
Exclude.DCs	Array List	Empty	Allow to filter on AD Domain Controller Server FQDN.
Include.Domains	Array List	Empty	Allow only a list of Active Directory Domain Controller FQDN to document.
Include.DCs	Array List	Empty	Allow only a list of Active Directory Domain FQDN to document.

InfoLevel

The InfoLevel schema allows configuration of each section of the report at a granular level. The following sections can be set.

There are 4 levels (0-3) of detail granularity for each section as follows;

Setting	InfoLevel	Description
0	Disabled	Does not collect or display any information
1	Enabled	Provides summarised information for a collection of objects
2	Adv Summary	Provides condensed, detailed information for a collection of objects
3	Detailed	Provides detailed information for individual objects

The table below outlines the default and maximum InfoLevel settings for each section.

Sub-Schema	Default Setting	Maximum Setting
Forest	1	1
Domain	1	3
DNS	0	2
CA	0	3

Healthcheck

The Healthcheck schema is used to toggle health checks on or off.

💻 Examples

There are a few examples listed below on running the AsBuiltReport script against a Microsoft Active Directory Domain Controller target. Refer to the README.md file in the main AsBuiltReport project repository for more examples.

# Generate a Microsoft Active Directory As Built Report for Domain Controller Server 'admin-dc-01v.contoso.local' using specified credentials. Export report to HTML & DOCX formats. Use default report style. Append timestamp to report filename. Save reports to 'C:\Users\Jon\Documents'
PS C:\> New-AsBuiltReport -Report Microsoft.AD -Target 'admin-dc-01v.contoso.local' -Username 'administrator@contoso.local' -Password 'P@ssw0rd' -Format Html,Word -OutputFolderPath 'C:\Users\Jon\Documents' -Timestamp

# Generate a Microsoft Active Directory As Built Report for Domain Controller Server 'admin-dc-01v.contoso.local' using specified credentials and report configuration file. Export report to Text, HTML & DOCX formats. Use default report style. Save reports to 'C:\Users\Jon\Documents'. Display verbose messages to the console.
PS C:\> New-AsBuiltReport -Report Microsoft.AD -Target 'admin-dc-01v.contoso.local' -Username 'administrator@contoso.local' -Password 'P@ssw0rd' -Format Text,Html,Word -OutputFolderPath 'C:\Users\Jon\Documents' -ReportConfigFilePath 'C:\Users\Jon\AsBuiltReport\AsBuiltReport.Microsoft.AD.json' -Verbose

# Generate a Microsoft Active Directory As Built Report for Domain Controller Server 'admin-dc-01v.contoso.local' using stored credentials. Export report to HTML & Text formats. Use default report style. Highlight environment issues within the report. Save reports to 'C:\Users\Jon\Documents'.
PS C:\> $Creds = Get-Credential
PS C:\> New-AsBuiltReport -Report Microsoft.AD -Target 'admin-dc-01v.contoso.local' -Credential $Creds -Format Html,Text -OutputFolderPath 'C:\Users\Jon\Documents' -EnableHealthCheck

# Generate a Microsoft Active Directory As Built Report for Domain Controller Server 'admin-dc-01v.contoso.local' using specified credentials. Export report to HTML & DOCX formats. Use default report style. Reports are saved to the user profile folder by default. Attach and send reports via e-mail.
PS C:\> New-AsBuiltReport -Report Microsoft.AD -Target 'admin-dc-01v.contoso.local' -Username 'administrator@contoso.local' -Password 'P@ssw0rd' -Format Html,Word -OutputFolderPath 'C:\Users\Jon\Documents' -SendEmail

❌ Known Issues

Issues with WinRM when using the IP address instead of the "Fully Qualified Domain Name".
This project relies heavily on the remote connection function through WinRM. For this reason the use of a Windows 10 client is specifically used as a jumpbox.
The report provides the ability to extract the configuration of the DHCP/DNS services. In order to obtain this information it is required that the servers running these services have powershell modules installed for each service (RSAT-DNS-Server & RSAT-AD-PowerShell).
This report assumes that the DNS Server service is running on the same server where Domain Controller is running (Cohost).
In some cases when trying to update the report, an error similar to this is generated:
- "PackageManagement\Install-Package : Authenticode issuer 'CN="xyz, INC.", O="xyz, INC.", L=San Jose, S=California on the previusly-installed module 'PSPKI'. If you still want to install or update, use -SkipPublisherCheck parameter."
- The expected workaround is to add the '-SkipPublisherCheck' to the install module 'Update-Module -Name PSPKI -Force -SkipPublisherCheck'

bilalinamdar/AsBuiltReport.Microsoft.AD