BIST Test error 14

Question

BIST Test error 14

Closed this issue 5 years ago · 3 comments

Hi Bill,

Bother you again.

I am Qifan from Shanghai. Thanks for your help on Probe Config Files. I have already got them now.

However, there is still an issue on BIST test. When I run HST test with the dongle, all tests are successful. But for the BIST test. There is an error 14 on Test Parallel Serial Bus.

Do you have any idea about this?

Test Base Station
result = 0 'SUCCESS'

Test Heartbeat
Probe: open
Starting test, allow ~5 seconds...
result = 0 'SUCCESS'

Test SerDes Link
Probe: open
Starting test, allow ~10 seconds...
Test result: serDes error count = 0

Test I2C/MemMap
Probe: open
Starting test...
result = 0 'SUCCESS'

Test EEPROM
Probe: open
Starting test...
result = 0 'SUCCESS'

Test Shift Registers
Probe: open
Starting test...
result = 0 'SUCCESS'

Test Parallel Serial Bus
Probe: open
Starting test...
result = 14 'BIST_ERROR'

Test Signal Path
Probe: open
Starting test, allow ~40 seconds...
Signal test result = FAILED

Test Noise Level
Probe: open
Starting test, allow ~40 seconds...
result = 14 'BIST_ERROR'

Answer 1 · 2019-10-03T15:17:26.000Z

Please refer questions on how things work to me directly. Reserve the issues feature of github for bug reports. The HST dongle and associated dialog is used for testing the health of head-stages. The BIST dialog tests probes. A parallel serial bus error usually indicates a poorly plugged in probe. Try reseating it. This would also account for failing the signal and noise tests. Bill From: Qifan_17 [mailto:notifications@github.com] Sent: Thursday, October 03, 2019 5:29 AM To: billkarsh/SpikeGLX <SpikeGLX@noreply.github.com> Cc: Subscribed <subscribed@noreply.github.com> Subject: [billkarsh/SpikeGLX] BIST Test error 14 (#14) Hi Bill, Bother you again. I am Qifan from Shanghai. Thanks for your help on Probe Config Files. I have already got them now. However, there is still an issue on BIST test. When I run HST test with the dongle, all tests are successful. But for the BIST test. There is an error 14 on Test Parallel Serial Bus. Do you have any idea about this?

…

________________________________ Test Base Station result = 0 'SUCCESS'

________________________________ Test Heartbeat Probe: open Starting test, allow ~5 seconds... result = 0 'SUCCESS'

________________________________ Test SerDes Link Probe: open Starting test, allow ~10 seconds... Test result: serDes error count = 0

________________________________ Test I2C/MemMap Probe: open Starting test... result = 0 'SUCCESS'

________________________________ Test EEPROM Probe: open Starting test... result = 0 'SUCCESS'

________________________________ Test Shift Registers Probe: open Starting test... result = 0 'SUCCESS'

________________________________ Test Parallel Serial Bus Probe: open Starting test... result = 14 'BIST_ERROR'

________________________________ Test Signal Path Probe: open Starting test, allow ~40 seconds... Signal test result = FAILED

________________________________ Test Noise Level Probe: open Starting test, allow ~40 seconds... result = 14 'BIST_ERROR' — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<https://urldefense.com/v3/__https:/github.com/billkarsh/SpikeGLX/issues/14?email_source=notifications&email_token=ABWEDUGRTN23KIFNIDJFQADQMW3PPA5CNFSM4I5AT3N2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HPLGMLA__;!oCotSwSxbw8!ULuyUTdmp-997dcVTZ4MQi90S9Fju6DqJA27jHacS2_QFk2VrUZsbWGjAw9RFg6r-So$>, or mute the thread<https://urldefense.com/v3/__https:/github.com/notifications/unsubscribe-auth/ABWEDUC66K4OYRZXQP2JXZ3QMW3PPANCNFSM4I5AT3NQ__;!oCotSwSxbw8!ULuyUTdmp-997dcVTZ4MQi90S9Fju6DqJA27jHacS2_QFk2VrUZsbWGjAw9RjmRlnw0$>.

Answer 2 · 2019-10-03T15:19:27.000Z

Likely probe not seated or bad probe. Not a bug.

Answer 3 · 2019-10-04T04:55:48.000Z

OK. Thanks, I will reconnect the probe and try again.