/audiotools

Automatically exported from code.google.com/p/audiotools

Primary LanguageSwift

Audio Tools .github/workflows/build.yml

http://audiotools.googlecode.com/files/Audiotools.png

Audio tools for testing audio equipment in conjunction with a PC. Windows and Mac versions have been released. Display shows frequency and relative level. Absolute level is not possible because of all the variables in the sound system.

Audio Signal Generator

http://audiotools.googlecode.com/files/Siggen.png

  • Frequency range 10Hz - 25KHz
  • Level range -6.0dB - -80dB

Using

The frequency knob responds to mouse dragging. It is possible to twirl it using the mouse. The fine frequency and level sliders allow for fine adjustments of frequency and output level. The frequency knob is also adjustable using the left and right arrow keys. The fine frequency slider is adjustable using the up and down arrow keys, the level slider using the page up and down keys.

Audio Level Measuring Set

http://audiotools.googlecode.com/files/LMS.png

Audio level measuring set. Measures frequency and relative level with a frequency spectrum display. Absolute level is not possible because of all the variables in the sound system.

Using

The level measuring set displays frequency and relative level with a frequency spectrum display. Input is from the currently selected audio input.

Audio Selective Level Measuring Set

http://audiotools.googlecode.com/files/SLMS.png

Audio selective level measuring set. Measures relative level at selected frequency with a frequency spectrum display. Absolute level is not possible because of all the variables in the sound system.

Using

The selective level measuring set displays selected frequency and relative level with a frequency spectrum display. Use mouse to turn knob, or left and right keys to adjust selected frequency. Input is from the currently selected audio input.

Audio Oscilloscope

http://audiotools.googlecode.com/files/Scope.png

  • Timebase 0.1ms - 0.5sec
  • Resolution 0.022ms @ 44100 samples/sec
  • Single shot
  • Adjustable sync level
  • Storage
  • Cursor

Using

Use the toolbar buttons to access functionality. From left to right: Input level control, bright line turns off sync, single shot, trigger, timebase menu, storage mode, display clear, shift left, shift right, shift to start, shift to end, reset. Clicking on the left y scale turns on the sync level control. Clicking on the scope display turns on the cursor line, which may be shifted left and right using the left and right arrow keys. The cursor line shows the time from the start of the trace in current timebase units, and the nominal trace value at that point. There is no calibration because of the various level controls in the audio system. The shift to start and reset toolbar buttons clear the sync level and the cursor.