This is a very simple A9LH binary which allows you to hold down any button on start to select the file you want to boot, files should go into /arm9select and follow the pattern of a.bin, b.bin, start.bin etc. If no buttons are being pressed or the file of the button you hold is not found it will use default.bin. If you want any of these files to also have screen backlight enabled, create files in the /arm9select folder in the pattern of a_bl, b_bl, start_bl etc. Again, if no buttons are being pressed it will check for default_bl. This project was made with the expectation of using my arm9loaderhax fork which does not enable the backlights by default, you can find it over on https://github.com/FIX94/arm9loaderhax.
This Project is based on A9LH by Jason Dellaluce
sdmmc.c & sdmmc.h originally written by Normatt
Licensed under GPLv2 or any later version, refer to the LICENSE file included.
- Smealum and contributors for libctru
- Normmatt for sdmmc.c and .h, and also for .ld files and the log from XDS by ichfly that provided us some of the information needed to get screen init
- Christophe Devine for the SHA codes
- Archshift for i2c.c and .h
- Megazig for crypto.c and .h
- Patois for original BRAHMA code
- Smealum, Derrek, Plutoo for publishing the exploit
- Yellows8 and Plutoo as ideators of it
- 3dbrew community
- bilis/b1l1s for his screen init code, and work on inegrating it into stage 2
- dark_samus for work on integrating screen init into stage 2