This script is for connecting to the CUHK department VPN (currently support CSE / EE / IE) on Ubuntu 14.04.
For the first time connecting to VPN, please run:
sudo ./install.shThe script will check and install the following packages:
- strongswan
- xl2tpd
- ppp
- isc-dhcp-client
The script will then help you to set the required config files, and also your department ID and password.
For each computer, you need to run the ./install.sh script once only.
To connect to the VPN, please run:
sudo ./vpn_connect.shTo disconnect from the VPN, please run:
sudo ./vpn_disconnect.sh
The scripts are incompatible to the scripts for connecting to CUHK VPN provided by ITSC.
If you have installed those scripts previously, you may find that you cannot connect to either CUHK VPN or CSE VPN using this script.
In this case, please run
sudo rm /etc/ipsec.conf
and then run install.sh again.
If the scripts fail in step "Connect to the VPN server", or get frozen in step "Change default route to ppp0", please check that you have input the correct password, or simply reinstall the scripts.
If you find that you cannot access to the internet after using the scripts, you may try:
sudo ip route add default via __GATEWAY__ dev __DEVICE__
with __GATEWAY__ and __DEVICE__ be replaced by the gateway and device respectively, which could be found in the step "Get default device and gateway".
This scripts was originally proposed by nnkken for connecting CSE VPN.